{-# LANGUAGE CPP, BangPatterns, Rank2Types #-} #ifdef USE_MONO_PAT_BINDS {-# LANGUAGE MonoPatBinds #-} #endif -- | -- Module : Blaze.ByteString.Builder.Internal -- Copyright : (c) 2010 Simon Meier -- License : BSD3-style (see LICENSE) -- -- Maintainer : Simon Meier <iridcode@gmail.com> -- Stability : experimental -- Portability : tested on GHC only -- -- Core types and functions for the 'Builder' monoid and the 'Put' monad. -- module Blaze.ByteString.Builder.Internal ( -- * Build Steps BufRange(..) , BuildSignal , BuildStep , done , bufferFull , insertByteString -- * Builder , Builder , fromBuildStepCont , fromPut , flush -- * Put , Put , putBuilder , putBuildStepCont , putLiftIO -- * Writes , module Blaze.ByteString.Builder.Internal.Write -- * Execution , toLazyByteString , toLazyByteStringWith , toByteString , toByteStringIO , toByteStringIOWith -- * Deafult Sizes , defaultFirstBufferSize , defaultMinimalBufferSize , defaultBufferSize , defaultMaximalCopySize ) where #ifdef HAS_FOREIGN_UNSAFE_MODULE import Foreign (withForeignPtr, sizeOf, copyBytes, plusPtr, minusPtr) import Foreign.ForeignPtr.Unsafe (unsafeForeignPtrToPtr) #else import Foreign (unsafeForeignPtrToPtr, withForeignPtr, sizeOf, copyBytes, plusPtr, minusPtr) #endif import Control.Monad (unless) import qualified Data.ByteString as S import qualified Data.ByteString.Internal as S import qualified Data.ByteString.Lazy as L import qualified Data.ByteString.Lazy.Internal as L import Blaze.ByteString.Builder.Internal.Types import Blaze.ByteString.Builder.Internal.Write ------------------------------------------------------------------------------ -- Internal global constants. ------------------------------------------------------------------------------ -- | Default size (~32kb) for the buffer that becomes a chunk of the output -- stream once it is filled. -- defaultBufferSize :: Int defaultBufferSize = 32 * 1024 - overhead -- Copied from Data.ByteString.Lazy. where overhead = 2 * sizeOf (undefined :: Int) -- | The minimal length (~4kb) a buffer must have before filling it and -- outputting it as a chunk of the output stream. -- -- This size determines when a buffer is spilled after a 'flush' or a direct -- bytestring insertion. It is also the size of the first chunk generated by -- 'toLazyByteString'. defaultMinimalBufferSize :: Int defaultMinimalBufferSize = 4 * 1024 - overhead where overhead = 2 * sizeOf (undefined :: Int) -- | The default length (64) for the first buffer to be allocated when -- converting a 'Builder' to a lazy bytestring. -- -- See 'toLazyByteStringWith' for further explanation. defaultFirstBufferSize :: Int defaultFirstBufferSize = 64 -- | The maximal number of bytes for that copying is cheaper than direct -- insertion into the output stream. This takes into account the fragmentation -- that may occur in the output buffer due to the early 'flush' implied by the -- direct bytestring insertion. -- -- @'defaultMaximalCopySize' = 2 * 'defaultMinimalBufferSize'@ -- defaultMaximalCopySize :: Int defaultMaximalCopySize = 2 * defaultMinimalBufferSize ------------------------------------------------------------------------------ -- Flushing and running a Builder ------------------------------------------------------------------------------ -- | Prepend the chunk if it is non-empty. {-# INLINE nonEmptyChunk #-} nonEmptyChunk :: S.ByteString -> L.ByteString -> L.ByteString nonEmptyChunk bs lbs | S.null bs = lbs | otherwise = L.Chunk bs lbs -- | Output all data written in the current buffer and start a new chunk. -- -- The use of this function depends on how the resulting bytestrings are -- consumed. 'flush' is possibly not very useful in non-interactive scenarios. -- However, it is kept for compatibility with the builder provided by -- Data.Binary.Builder. -- -- When using 'toLazyByteString' to extract a lazy 'L.ByteString' from a -- 'Builder', this means that a new chunk will be started in the resulting lazy -- 'L.ByteString'. The remaining part of the buffer is spilled, if the -- reamining free space is smaller than the minimal desired buffer size. -- {-# INLINE flush #-} flush :: Builder flush = fromBuildStepCont step where step k !(BufRange op _) = return $ insertByteString op S.empty k -- | Run a 'Builder' with the given buffer sizes. -- -- Use this function for integrating the 'Builder' type with other libraries -- that generate lazy bytestrings. -- -- Note that the builders should guarantee that on average the desired chunk -- size is attained. Builders may decide to start a new buffer and not -- completely fill the existing buffer, if this is faster. However, they should -- not spill too much of the buffer, if they cannot compensate for it. -- -- A call @toLazyByteStringWith bufSize minBufSize firstBufSize@ will generate -- a lazy bytestring according to the following strategy. First, we allocate -- a buffer of size @firstBufSize@ and start filling it. If it overflows, we -- allocate a buffer of size @minBufSize@ and copy the first buffer to it in -- order to avoid generating a too small chunk. Finally, every next buffer will -- be of size @bufSize@. This, slow startup strategy is required to achieve -- good speed for short (<200 bytes) resulting bytestrings, as for them the -- allocation cost is of a large buffer cannot be compensated. Moreover, this -- strategy also allows us to avoid spilling too much memory for short -- resulting bytestrings. -- -- Note that setting @firstBufSize >= minBufSize@ implies that the first buffer -- is no longer copied but allocated and filled directly. Hence, setting -- @firstBufSize = bufSize@ means that all chunks will use an underlying buffer -- of size @bufSize@. This is recommended, if you know that you always output -- more than @minBufSize@ bytes. toLazyByteStringWith :: Int -- ^ Buffer size (upper-bounds the resulting chunk size). -> Int -- ^ Minimal free buffer space for continuing filling -- the same buffer after a 'flush' or a direct bytestring -- insertion. This corresponds to the minimal desired -- chunk size. -> Int -- ^ Size of the first buffer to be used and copied for -- larger resulting sequences -> Builder -- ^ Builder to run. -> L.ByteString -- ^ Lazy bytestring to output after the builder is -- finished. -> L.ByteString -- ^ Resulting lazy bytestring toLazyByteStringWith bufSize minBufSize firstBufSize (Builder b) k = S.inlinePerformIO $ fillFirstBuffer (b (buildStep finalStep)) where finalStep (BufRange pf _) = return $ Done pf () -- fill a first very small buffer, if we need more space then copy it -- to the new buffer of size 'minBufSize'. This way we don't pay the -- allocation cost of the big 'bufSize' buffer, when outputting only -- small sequences. fillFirstBuffer !step0 | minBufSize <= firstBufSize = fillNewBuffer firstBufSize step0 | otherwise = do fpbuf <- S.mallocByteString firstBufSize withForeignPtr fpbuf $ \pf -> do let !pe = pf `plusPtr` firstBufSize mkbs pf' = S.PS fpbuf 0 (pf' `minusPtr` pf) {-# INLINE mkbs #-} next <- runBuildStep step0 (BufRange pf pe) case next of Done pf' _ | pf' == pf -> return k | otherwise -> return $ L.Chunk (mkbs pf') k BufferFull newSize pf' nextStep -> do let !l = pf' `minusPtr` pf fillNewBuffer (max (l + newSize) minBufSize) $ buildStep $ \(BufRange pfNew peNew) -> do copyBytes pfNew pf l let !br' = BufRange (pfNew `plusPtr` l) peNew runBuildStep nextStep br' InsertByteString pf' bs nextStep | pf' == pf -> return $ nonEmptyChunk bs (S.inlinePerformIO $ fillNewBuffer bufSize nextStep) | otherwise -> return $ L.Chunk (mkbs pf') (nonEmptyChunk bs (S.inlinePerformIO $ fillNewBuffer bufSize nextStep)) -- allocate and fill a new buffer fillNewBuffer !size !step0 = do fpbuf <- S.mallocByteString size withForeignPtr fpbuf $ fillBuffer fpbuf where fillBuffer fpbuf !pbuf = fill pbuf step0 where !pe = pbuf `plusPtr` size fill !pf !step = do next <- runBuildStep step (BufRange pf pe) let mkbs pf' = S.PS fpbuf (pf `minusPtr` pbuf) (pf' `minusPtr` pf) {-# INLINE mkbs #-} case next of Done pf' _ | pf' == pf -> return k | otherwise -> return $ L.Chunk (mkbs pf') k BufferFull newSize pf' nextStep | pf' == pf -> fillNewBuffer (max newSize bufSize) nextStep | otherwise -> return $ L.Chunk (mkbs pf') (S.inlinePerformIO $ fillNewBuffer (max newSize bufSize) nextStep) InsertByteString pf' bs nextStep | pf' == pf -> return $ nonEmptyChunk bs (S.inlinePerformIO $ fill pf' nextStep) | minBufSize < pe `minusPtr` pf' -> return $ L.Chunk (mkbs pf') (nonEmptyChunk bs (S.inlinePerformIO $ fill pf' nextStep)) | otherwise -> return $ L.Chunk (mkbs pf') (nonEmptyChunk bs (S.inlinePerformIO $ fillNewBuffer bufSize nextStep)) -- | Extract the lazy 'L.ByteString' from the builder by running it with default -- buffer sizes. Use this function, if you do not have any special -- considerations with respect to buffer sizes. -- -- @ 'toLazyByteString' b = 'toLazyByteStringWith' 'defaultBufferSize' 'defaultMinimalBufferSize' 'defaultFirstBufferSize' b L.empty@ -- -- Note that @'toLazyByteString'@ is a 'Monoid' homomorphism. -- -- > toLazyByteString mempty == mempty -- > toLazyByteString (x `mappend` y) == toLazyByteString x `mappend` toLazyByteString y -- -- However, in the second equation, the left-hand-side is generally faster to -- execute. -- toLazyByteString :: Builder -> L.ByteString toLazyByteString b = toLazyByteStringWith defaultBufferSize defaultMinimalBufferSize defaultFirstBufferSize b L.empty {-# INLINE toLazyByteString #-} -- | Pack the chunks of a lazy bytestring into a single strict bytestring. packChunks :: L.ByteString -> S.ByteString packChunks lbs = do S.unsafeCreate (fromIntegral $ L.length lbs) (copyChunks lbs) where copyChunks !L.Empty !_pf = return () copyChunks !(L.Chunk (S.PS fpbuf o l) lbs') !pf = do withForeignPtr fpbuf $ \pbuf -> copyBytes pf (pbuf `plusPtr` o) l copyChunks lbs' (pf `plusPtr` l) -- | Run the builder to construct a strict bytestring containing the sequence -- of bytes denoted by the builder. This is done by first serializing to a lazy bytestring and then packing its -- chunks to a appropriately sized strict bytestring. -- -- > toByteString = packChunks . toLazyByteString -- -- Note that @'toByteString'@ is a 'Monoid' homomorphism. -- -- > toByteString mempty == mempty -- > toByteString (x `mappend` y) == toByteString x `mappend` toByteString y -- -- However, in the second equation, the left-hand-side is generally faster to -- execute. -- toByteString :: Builder -> S.ByteString toByteString = packChunks . toLazyByteString -- | @toByteStringIOWith bufSize io b@ runs the builder @b@ with a buffer of -- at least the size @bufSize@ and executes the 'IO' action @io@ whenever the -- buffer is full. -- -- Compared to 'toLazyByteStringWith' this function requires less allocation, -- as the output buffer is only allocated once at the start of the -- serialization and whenever something bigger than the current buffer size has -- to be copied into the buffer, which should happen very seldomly for the -- default buffer size of 32kb. Hence, the pressure on the garbage collector is -- reduced, which can be an advantage when building long sequences of bytes. -- toByteStringIOWith :: Int -- ^ Buffer size (upper bounds -- the number of bytes forced -- per call to the 'IO' action). -> (S.ByteString -> IO ()) -- ^ 'IO' action to execute per -- full buffer, which is -- referenced by a strict -- 'S.ByteString'. -> Builder -- ^ 'Builder' to run. -> IO () -- ^ Resulting 'IO' action. toByteStringIOWith bufSize io (Builder b) = fillBuffer bufSize (b (buildStep finalStep)) where finalStep !(BufRange pf _) = return $ Done pf () fillBuffer !size step = do S.mallocByteString size >>= fill where fill fpbuf = do let !pf = unsafeForeignPtrToPtr fpbuf !br = BufRange pf (pf `plusPtr` size) -- safe due to later reference of fpbuf -- BETTER than withForeignPtr, as we lose a tail call otherwise signal <- runBuildStep step br case signal of Done pf' _ -> io $ S.PS fpbuf 0 (pf' `minusPtr` pf) BufferFull minSize pf' nextStep -> do io $ S.PS fpbuf 0 (pf' `minusPtr` pf) fillBuffer (max bufSize minSize) nextStep InsertByteString pf' bs nextStep -> do io $ S.PS fpbuf 0 (pf' `minusPtr` pf) unless (S.null bs) (io bs) fillBuffer bufSize nextStep -- | Run the builder with a 'defaultBufferSize'd buffer and execute the given -- 'IO' action whenever the buffer is full or gets flushed. -- -- @ 'toByteStringIO' = 'toByteStringIOWith' 'defaultBufferSize'@ -- -- This is a 'Monoid' homomorphism in the following sense. -- -- > toByteStringIO io mempty == return () -- > toByteStringIO io (x `mappend` y) == toByteStringIO io x >> toByteStringIO io y -- toByteStringIO :: (S.ByteString -> IO ()) -> Builder -> IO () toByteStringIO = toByteStringIOWith defaultBufferSize {-# INLINE toByteStringIO #-} ------------------------------------------------------------------------------ -- Draft of new builder/put execution code ------------------------------------------------------------------------------ {- FIXME: Generalize this code such that it can replace the above clunky - implementations. -- | A monad for lazily composing lazy bytestrings using continuations. newtype LBSM a = LBSM { unLBSM :: (a, L.ByteString -> L.ByteString) } instance Monad LBSM where return x = LBSM (x, id) (LBSM (x,k)) >>= f = let LBSM (x',k') = f x in LBSM (x', k . k') (LBSM (_,k)) >> (LBSM (x',k')) = LBSM (x', k . k') -- | Execute a put and return the written buffers as the chunks of a lazy -- bytestring. toLazyByteString :: Put a -> (a, L.ByteString) toLazyByteString put = (fst result, k (bufToLBSCont (snd result) L.empty)) where -- FIXME: Check with ByteString guys why allocation in inlinePerformIO is -- bad. -- initial buffer buf0 = S.inlinePerformIO $ allocBuffer defaultBufferSize -- run put, but don't force result => we're lazy enough LBSM (result, k) = runPut liftIO outputBuf outputBS put buf0 -- convert a buffer to a lazy bytestring continuation bufToLBSCont = maybe id L.Chunk . unsafeFreezeNonEmptyBuffer -- lifting an io putsignal to a lazy bytestring monad liftIO io = LBSM (S.inlinePerformIO io, id) -- add buffer as a chunk prepare allocation of new one outputBuf minSize buf = LBSM ( S.inlinePerformIO $ allocBuffer (max minSize defaultBufferSize) , bufToLBSCont buf ) -- add bytestring directly as a chunk; exploits postcondition of runPut -- that bytestrings are non-empty outputBS bs = LBSM ((), L.Chunk bs) {- -- | A Builder that traces a message traceBuilder :: String -> Builder traceBuilder msg = fromBuildStepCont $ \k br@(BufRange op ope) -> do putStrLn $ "traceBuilder " ++ show (op, ope) ++ ": " ++ msg k br test2 :: Word8 -> [S.ByteString] test2 x = L.toChunks $ toLazyByteString2 $ fromBuilder $ mconcat [ traceBuilder "before flush" , fromWord8 48 , flushBuilder , flushBuilder , traceBuilder "after flush" , fromWord8 x ] -} -}