cabal-doctest

A Setup.hs helper for running doctests.

Simple example

Follow simple example for the common case of a single-library .cabal package with doctests.

To recap the example's code:

1. specify build-type: Custom in your .cabal file;

2. declare dependencies of Setup.hs:

   custom-setup
    setup-depends:
      base >= 4 && <5,
      cabal-doctest >= 1 && <1.1
   

   See Notes below for a caveat with cabal-install < 2.4.

3. Populate Setup.hs like so:

   module Main where
   
   import Distribution.Extra.Doctest (defaultMainWithDoctests)
   
   main :: IO ()
   main = defaultMainWithDoctests "doctests"
   

   Assuming your test-suite is called doctests, this Setup will generate a Build_doctests module during package build. If your test-suite goes by name foo, defaultMainWithDoctests "foo" creates a Build_foo module.

4. Use the generated module in a testsuite, simply like so:

   module Main where
   
   import Build_doctests (flags, pkgs, module_sources)
   import Data.Foldable (traverse_)
   import System.Environment (unsetEnv)
   import Test.DocTest (doctest)
   
   main :: IO ()
   main = do
       traverse_ putStrLn args -- optionally print arguments
       unsetEnv "GHC_ENVIRONMENT" -- see 'Notes'; you may not need this
       doctest args
     where
       args = flags ++ pkgs ++ module_sources
   

Ultimately, cabal test or stack test should run the doctests of your package.

Example with multiple cabal components

cabal-doctest also supports more exotic use cases where a .cabal file contains more components with doctests than just the main library, including:

• doctests in executables,
• doctests in internal libraries (if using Cabal-2.0 or later).

Unlike the simple example shown above, these examples involve named components. You don't need to change the Setup.hs script to support this use case. However, in this scenario Build_doctests will generate extra copies of the flags, pkgs, and module_sources values for each additional named component.

The simplest approach is to use x-doctest-components field in .cabal:

x-doctest-components: lib lib:internal exe:example

In that case, the test driver is generally:

module Main where

import Build_doctests (Component (..), components)
import Data.Foldable (for_)
import System.Environment (unsetEnv)
import Test.DocTest (doctest)

main :: IO ()
main = for_ components $ \(Component name flags pkgs sources) -> do
    print name
    putStrLn "----------------------------------------"
    let args = flags ++ pkgs ++ sources
    for_ args putStrLn
    unsetEnv "GHC_ENVIRONMENT"
    doctest args

There is also a more explicit approach: if you have an executable named foo, then Build_doctest will contain flags_exe_foo, pkgs_exe_foo, and module_sources_exe_foo. If the name has hyphens in it (e.g., my-exe), cabal-doctest will convert them to underscores (e.g., you'd get flags_my_exe, pkgs_my_exe, module_sources_my_exe). Internal library bar values will have a _lib_bar suffix.

An example testsuite driver for this use case might look like this:

module Main where

import Build_doctests
       (flags,            pkgs,            module_sources,
        flags_exe_my_exe, pkgs_exe_my_exe, module_sources_exe_my_exe)
import Data.Foldable (traverse_)
import System.Environment (unsetEnv)
import Test.DocTest

main :: IO ()
main = do
    unsetEnv "GHC_ENVRIONMENT"
    -- doctests for library
    traverse_ putStrLn libArgs
    doctest libArgs

    -- doctests for executable
    traverse_ putStrLn exeArgs
    doctest exeArgs
  where
    libArgs = flags            ++ pkgs            ++ module_sources
    exeArgs = flags_exe_my_exe ++ pkgs_exe_my_exe ++ module_sources_exe_my_exe

See the multiple-components-example.

Additional configuration

The cabal-doctest based Setup.hs supports a few extensions fields in pkg.cabal files to customise the doctest runner behaviour, without customising the default doctest.hs.

test-suite doctests:
  if impl(ghc >= 8.0)
    x-doctest-options: -fdiagnostics-color=never
  x-doctest-source-dirs: test
  x-doctest-modules: Servant.Utils.LinksSpec

• x-doctest-options Additional arguments passed into doctest command.
• x-doctest-modules Additional modules to doctest. May be useful if you have doctest in test or executables (i.e not default library component).
• x-doctest-src-dirs Additional source directories to look for the modules.

Notes

• If support for cabal-install < 2.4 is required, you'll have to add Cabal to setup-depends; see issue haskell/cabal#4288.

• Some versions of Cabal (for instance, 2.0) can choose to build a package's doctest test suite before the library. However, in order for cabal-doctest to work correctly, the library must be built first, as doctest relies on the presence of generated files that are only created when the library is built. See #19.

  A hacky workaround for this problem is to depend on the library itself in a doctests test suite. See simple-example.cabal for a demonstration. (This assumes that the test suite has the ability to read build artifacts from the library, a separate build component. In practice, this assumption holds, which is why this library works at all.)

• custom-setup section is supported starting from cabal-install-1.24. For older cabal-install's you have to install custom setup dependencies manually.

• stack respects custom-setup starting from version 1.3.3. Before that you have to use explicit-setup-deps setting in your stack.yaml; stack#2094.

• With base < 4.7 (GHC < 7.8, pre-2014), System.Environment.unsetEnv function will need to be imported from base-compat library. It is already in transitive dependencies of doctest. Simply declare the dependency upon base-compat, and then import System.Environment.Compat (unsetEnv) if you need that old GHC.

• You can use x-doctest-options field in test-suite doctests to pass additional flags to the doctest.

• For build-type: Configure packages, you can use defaultMainAutoconfWithDoctests function to make custom Setup.hs script.

• If you use the default . in hs-source-dirs, then running doctests might fail with weird errors (ambiguous module errors). Workaround is to move sources under src/ or some non-top-level directory.

• The extensions: field isn't supported. Upgrade your .cabal file to use at least cabal-version: >= 1.10 and use default-extensions or other-extensions.

• If you use QuickCheck properties (prop>) in your doctests, the test-suite doctest should depend on QuickCheck and template-haskell. This is a little HACK: These dependencies aren't needed to build the doctests test-suite executable. However, as we let Cabal resolve dependencies, we can pass the resolved (and installed!) package identifiers to to the doctest command. This way, QuickCheck and template-haskell are available to doctest, otherwise you'll get errors like:

    Variable not in scope:
      mkName
        :: [Char]
           -> template-haskell-2.11.1.0:Language.Haskell.TH.Syntax.Name
  

  or

    Variable not in scope:
      polyQuickCheck
        :: Language.Haskell.TH.Syntax.Name -> Language.Haskell.TH.Lib.ExpQ
  

• From version 2, Stack sets the GHC_ENVIRONMENT variable, and GHC (as invoked by doctest) will pick that up. This is undesirable: cabal-doctest passes all the necessary information on the command line already, and can lead to ambiguous module errors as GHC will load the environment in addition to what cabal-doctest instructs it to.

  Hence, cabal-doctest tells GHC to ignore package environments altogether on the command line. However, this is only possible since GHC 8.2. If you are using cabal-doctest with Stack 2 and GHC 8.0 or earlier and seeing ambiguous module errors or other mysterious failures, try manually unsetting GHC_ENVIRONMENT before invoking doctest.

• If you are on Nix. doctest will not pick up your version of GHC if you don't point it towards it, and therefore will result in "cannot satisfy -package-id" errors. You will need to set NIX_GHC and NIX_GHC_LIBDIR within your environment in order for doctest to pick up your GHC. Put the following in shell.nix and run nix-shell.

  # shell.nix
  { pkgs ? import <nixpkgs> {} }:
  let
    myHaskell = (pkgs.haskellPackages.ghcWithHoogle (p: with p; [
      # Put your dependencies here
      containers
      hslogger
    ]));
  in
  pkgs.mkShell {
    name = "myPackage";
  
    # These environment variables are important. Without these,
    # doctest doesn't pick up nix's version of ghc, and will fail
    # claiming it can't find your dependencies
    shellHook = ''
      export NIX_GHC=${myHaskell}/bin/ghc
      export NIX_GHC_LIBDIR=${myHaskell}/lib/ghc-8.10.7
    '';
    buildInputs = with pkgs; [
      myHaskell
    ];
  }
  

Copyright

Copyright 2017 Oleg Grenrus.

With contributions from:

• Ryan Scott
• Andreas Abel
• Max Ulidtko

Available under the BSD 3-clause license.