Clash.Xilinx.ClockGen

PLL and other clock-related components for Xilinx FPGAs

Documentation

clockWizard

Arguments

:: forall domIn domOut periodIn periodOut edge init polarity name. (KnownConfiguration domIn ('DomainConfiguration domIn periodIn edge 'Asynchronous init polarity), KnownConfiguration domOut ('DomainConfiguration domOut periodOut edge 'Asynchronous init polarity))

=> SSymbol name

Name of the component, must correspond to the name entered in the "Clock Wizard" dialog.

For example, when you entered "clockWizard50", instantiate as follows:

SSymbol @ "clockWizard50"

-> Clock domIn

Free running clock (i.e. a clock pin connected to a crystal)

-> Reset domIn

Reset for the PLL

-> (Clock domOut, Enable domOut)

(Stable PLL clock, PLL lock)

A clock source that corresponds to the Xilinx PLL/MMCM component created with the "Clock Wizard" with settings to provide a stable Clock from a single free-running input

Only works when configured with:

• 1 reference clock
• 1 output clock
• a reset port
• a locked port

You must use type applications to specify the output clock domain, e.g.:

type Dom100MHz = Dom "A" 10000

-- outputs a clock running at 100 MHz
clockWizard @Dom100MHz (SSymbol @"clkWizard50to100") clk50 rst

clockWizardDifferential

Arguments

:: forall domIn domOut periodIn periodOut edge init polarity name. (KnownConfiguration domIn ('DomainConfiguration domIn periodIn edge 'Asynchronous init polarity), KnownConfiguration domOut ('DomainConfiguration domOut periodOut edge 'Asynchronous init polarity))

=> SSymbol name

Name of the component, must correspond to the name entered in the "Clock Wizard" dialog.

For example, when you entered "clockWizardD50", instantiate as follows:

SSymbol @ "clockWizardD50"

-> Clock domIn

Free running clock, negative phase

-> Clock domIn

Free running clock, positive phase

-> Reset domIn

Reset for the PLL

-> (Clock domOut, Enable domOut)

(Stable PLL clock, PLL lock)

A clock source that corresponds to the Xilinx PLL/MMCM component created with the "Clock Wizard", with settings to provide a stable Clock from differential free-running inputs.

Only works when configured with:

• 1 differential reference pair
• 1 output clock
• a reset port
• a locked port

You must use type applications to specify the output clock domain, e.g.:

type Dom100MHz = Dom "A" 10000

-- outputs a clock running at 100 MHz
clockWizardDifferential @Dom100MHz (SSymbol @"clkWizardD50to100") clk50N clk50P rst