Changelog

0.12.0.1 (2024-09-28)

• Fix width of code blocks when using wide characters (#171)
• Bump pandoc upper bound to 3.3.

0.12.0.0 (2024-02-27)

• Render tabs in code blocks by expanding them to spaces. The amount of spaces a tab character aligns to is customizable using tabStop, e.g. tabStop: 8. The default is 4.

• Rename eval.wrap to eval.container (#167)

  wrap is used at the top-level of settings for wrapping at a certain column, and inside eval to determine the type in which the result is "wrapped". Using the same name for both is confusing, so this adds eval.container as the new name for eval.wrap. eval.wrap will continue to be supported for the forseeable future, but its use will be discouraged.

  This also changes the values (again keeping the original ones for backwards-compat), so the complete changes to a configuration would be:

  • wrap: code becomes container: code
  • wrap: raw becomes container: none
  • wrap: rawInline becomes container: inline

• Add a type: matrix transition effect, loosely inspired by the 1999 science fiction movie.

0.11.0.0 (2024-02-14)

• Support wrapping at a specific column (#164)

  Using a specific wrap column, e.g. wrap: 60, works well together with auto margins (see below).

• Support centering content with auto margins (#164)

  Configuration is done through the existing margins setting.

  To vertically center content, use top: auto. To horizontally center content, use both left: auto and right: auto. For example:

  ---
  title: Centered presentation
  author: John Doe
  patat:
      margins:
          left: auto
          right: auto
          top: auto
  ...
  
  Hello world
  

  Setting wrap: true is recommended when vertically centering content if there are any lines that are too wide for the terminal.

0.10.2.0 (2023-11-25)

• Add eval.wrap option

  This adds a new wrap section to the eval configuration.

  By default, the output is wrapped in a code block again with the original syntax highlighting. You can customize this behaviour by setting wrap to:

  • code: the default setting.
  • raw: no formatting applied.
  • rawInline: no formatting applied and no trailing newline.

  You can use rawInline to draw graphics. In order to do that, for example, we could configure kitten code snippets to evaluate using Kitty's command icat. This uses the rawInline code setting to ensure that the resulting output is not wrapped in a code block, and the fragment and replace settings immediately replace the snippet:

  ---
  patat:
    eval:
      kitten:
        command: sed 's/^/kitten /' | bash
        replace: true
        fragment: false
        wrap: rawInline
  ...
  
  See, for example:
  
  ```kitten
  icat --align left dank-meme.jpg
  ```
  

0.10.1.1 (2023-10-18)

• Fix issues in text wrapping when starting a transition

  This could show transitions using different wrapping or dropped characters when a line extends past the terminal width.

0.10.1.0 (2023-10-15)

• Add dissolve transition effect (#150)

• Add random transitions (#151)

  Set transition type to random to randomly sample transition effects

0.10.0.0 (2023-10-12)

• Add transition effects (#149)

  This adds a framework for setting transition effects in between slides. Only a single transition type is implemented at this point, slideLeft.

  Example configuration:

  patat:
    transition:
      type: slideLeft
      frames: 24  # Optional
      duration: 1  # Seconds, optional
  

• Allow overriding certain settings in slides (#148)

  Configuration was typically done in the metadata block of the input file, or in a per-user configuration. These settings are applied to the entire presentation.

  We now allow selectively overriding these settings on a per-slide basis, by adding one or more config blocks to those slides. Config blocks are comments that start with config:. They can be placed anywhere in the slide.

  # This is a normal slide
  
  Normal slide content
  
  # This slide has a different colour header
  
  <!--config:
  theme:
    header: [vividYellow]
  -->
  
  Wow, how did that happen?
  

• Allow configuring top margin (#147)

0.9.2.0 (2023-09-26)

• Read configuration from XDG standard directory (#146)

  The per-user patat configuration file was $HOME/.patat.yaml, which does not follow the XDG standard. We now support $XDG_CONFIG_DIRECTORY/patat/config.yaml (typically $XDG_CONFIG_DIRECTORY is set to $HOME/.config) which is compliant with the standard.

  Note that $HOME/.patat.yaml is still supported for backward-compatibility, but anything in $XDG_CONFIG_DIRECTORY takes precedence.

• Support filenames in bash completion (#145) (#126)

0.9.1.0 (2023-09-25)

• Fall back to forcing UTF-8 if decoding fails (#144) (#127)

  When we try to read a file that is encoded in UTF-8, and the system locale is not set to UTF-8, the GHC runtime system will throw an error.

  While this typically indicates that the user should update their system locale using e.g. the LANG environment variable, we want to provide a good initial experience for people unfamiliar with this, and in 2023 it's reasonable to assume files may be encoded in UTF-8.

• Dependency updates:

  • Bump skylighting upper bound to 0.15 (#143)

0.9.0.0 (2023-09-13)

• Add proper support for speaker notes (#142)

  You can configure patat to write the speaker notes for the current slide to a file whenever the slide changes:

  patat:
    speakerNotes:
      file: /tmp/notes.txt
  

  Then, you can display these in a second terminal (presumably on a second monitor) by just displaying this file whenever it changes. entr is one way to do that:

  echo /tmp/notes.txt | entr -s 'clear; cat /tmp/notes.txt'
  

  Alternatively, just use a second patat instance with --watch enabled:

  patat -w /tmp/notes.txt
  

• Add support for showing plain text files (#141)

  This isn't super useful on its own, it's meant to support speaker notes.

• Add syntaxDefinitions to settings (#140)

  This allows users to add custom kate highlighting XML files in the settings:

  ---
  patat:
    syntaxDefinitions:
    - 'impurescript.xml'
  ...
  
  Here is some *im*purescript:
  
  ```impurescript
  ...
  ```
  

0.8.9.0 (2023-06-27)

• Apply block quote theming to entire block (#119) (#111)
• Fix table header theming (#128)
• Dependency updates:
  • aeson to 2.1
  • optparse-applicative to 0.18
  • pandoc to 3.1
  • pandoc-types to 1.23
  • text to 2.0
  • time to 1.12

0.8.8.0 (2022-10-26)

• Allow hiding slide number (contribution by Paweł Dybiec)
• Support additional markdown extensions (contribution by Spreadcat)
• Dependency updates:
  • aeson to 2.0
  • ansi-terminal to 0.11
  • base64-bytestring to 1.2
  • bytestring to 0.11
  • optparse-applicative to 1.16
  • pandoc to 2.19
  • skylighting to 0.13

0.8.7.0 (2021-03-12)

• Fix alignment and display of CJK characters in presentation title, author and tables
• Add support for showing images in Kitty terminal
• Search in $PATH for w3mimgdisplay
• Bump pandoc dependency to 2.11
• Refactor Patat.Presentation.Display module to make it pure

0.8.6.1 (2020-09-18)

• Fix issue with laziness for evaluted code blocks, they should only be evaluated when we actually want to show them
• Bump stack resolver to lts-16.9

0.8.6.0 (2020-09-11)

• Allow evaluating code blocks (see README for more info)
• Refactor implementation of fragments
• Add breadcrumbs to title based on headers
• Error out when YAML parsing fails

0.8.5.0 (2020-06-29)

• Bump pandoc dependency to 2.9
• Switch to goldplate for testing

0.8.4.3 (2020-01-21)

• Fix Haddock syntax in some comments (contribution by Asad Saeeduddin)

0.8.4.2 (2020-01-18)

• Add builds for Mac OS
• Refactor CircleCI config & Makefile

0.8.4.1 (2019-10-29)

• Bump CircleCI configuration
• Bump release script
• Add slide seeking to --help output

0.8.4.0 (2019-10-09)

• Add slide seeking (enter slide number + enter)
• Fix turning tty echo off/on during presentation
• Run w3mimgdisplay cleanup action, fixing image issues on some terminals

0.8.3.0 (2019-09-07)

• Fix test failure again, and ensure that it works for multiple pandoc versions by slightly modifying test input
• Include pandoc version info in patat --version

0.8.2.5 (2019-08-12)

• Fix test failure caused by slightly different pandoc output for lists

0.8.2.4 (2019-08-12)

• Bump optparse-applicative upper bound to 0.16
• Bump skylighting upper bound to 0.9

0.8.2.3 (2019-06-25)

• Bump upper pandoc dependency to 2.8

0.8.2.2 (2019-02-04)

• Bump lower base dependency to 4.8

0.8.2.1 (2019-02-03)

• Bump pandoc to 2.6
• Bump ansi-terminal to 0.10

0.8.2.0 (2019-01-24)

• GHC 7.8 compatibility

0.8.1.3 (2019-01-24)

• Bump pandoc to 2.4
• Bump yaml to 0.11

0.8.1.2 (2018-10-29)

• Work around test failure caused by slightly different syntax highlighting in different pandoc versions

0.8.1.1 (2018-10-26)

• Tickle CircleCI cache

0.8.1.0 (2018-10-26)

• Add support for italic ansi code in themes
• Fix centered titles not being centered (contribution by Hamza Haiken)

0.8.0.0 (2018-08-31)

• Themed border rendering improvements (contribution by Hamza Haiken)
• Add support for margins (contribution by Hamza Haiken)
• Add RGB colour support for themes (contribution by Hamza Haiken)
• Add experimental images support
• Add images support for iTerm2 (contribution by @2mol)

0.7.2.0 (2018-05-08)

• GHC 8.4 compatibility

0.7.1.0 (2018-05-08)

• GHC 8.4 compatibility

0.7.0.0 (2018-05-04)

• Support HTML-style comments

0.6.1.2 (2018-04-30)

• Bump pandoc to 2.2

0.6.1.1 (2018-04-27)

• Bump aeson to 1.3
• Bump skylighting to 0.7
• Bump time to 1.9
• Bump ansi-terminal to 0.8

0.6.1.0 (2018-01-28)

• Bump skylighting to 0.6
• Bump pandoc to 2.1
• Bump ansi-terminal to 0.7

0.6.0.1 (2017-12-24)

• Automatically upload linux binary to GitHub

0.6.0.0 (2017-12-19)

• Make pandoc extensions customizable in the configuration
• Bump pandoc to 2.0

0.5.2.2 (2017-06-14)

• Add network-uri dependency to fix travis build

0.5.2.1 (2017-06-14)

• Bump optparse-applicative-0.14 dependency

0.5.2.0 (2017-05-16)

• Add navigation using PageUp and PageDown.
• Use skylighting instead of deprecated highlighting-kate for syntax highlighting.

0.5.1.2 (2017-04-26)

• Make build reproducible even if timezone changes (patch by Félix Sipma)

0.5.1.1 (2017-04-23)

• Include README in Extra-source-files so it gets displayed on Hackage

0.5.1.0 (2017-04-23)

• Bump aeson-1.2 dependency
• Fix vertical alignment of title slides
• Fix wrapping issue with inline code at end of line
• Add bash-completion script generation to Makefile

0.5.0.0 (2017-02-06)

• Add a slideLevel option & autodetect it. This changes the way patat splits slides. For more information, see the README or the man page. If you just want to get the old behavior back, just add:

    ---
    patat:
      slideLevel: 1
    ...
  

  To the top of your presentation.

• Clear the screen when finished with the presentation.

0.4.7.1 (2017-01-22)

• Bump directory-1.3 dependency
• Bump time-1.7 dependency

0.4.7.0 (2017-01-20)

• Bump aeson-1.1 dependency
• Parse YAML for settings using yaml instead of pandoc
• Clarify watch & autoAdvance combination in documentation.

0.4.6.0 (2016-12-28)

• Redraw the screen on unknown commands to prevent accidental typing from showing up.
• Make the cursor invisible during the presentation.
• Move the footer down one more line to gain some screen real estate.

0.4.5.0 (2016-12-05)

• Render the date in a locale-independent manner (patch by Daniel Shahaf).

0.4.4.0 (2016-12-03)

• Force the use of UTF-8 when generating the man page.

0.4.3.0 (2016-12-02)

• Use SOURCE_DATE_EPOCH if it is present instead of getting the date from git log.

0.4.2.0 (2016-12-01)

• Fix issues with man page generation on Travis.

0.4.1.0 (2016-12-01)

• Fix compatibility with pandoc-1.18 and pandoc-1.19.
• Add a man page.

0.4.0.0 (2016-11-15)

• Add configurable auto advancing.
• Support fragmented slides.

0.3.3.0 (2016-10-31)

• Add a --version flag.
• Add support for pandoc-1.18 which includes a new LineBlock element.

0.3.2.0 (2016-10-20)

• Keep running even if errors are encountered during reload.

0.3.1.0 (2016-10-18)

• Fix compilation with lts-6.22.

0.3.0.0 (2016-10-17)

• Add syntax highlighting support.
• Fixed slide clipping after reload.

0.2.0.0 (2016-10-13)

• Add theming support.
• Fix links display.
• Add support for wrapping.
• Allow org mode as input format.

0.1.0.0 (2016-10-02)

• Upload first version from hotel wifi in Kalaw.