Termonad ========= [![Build Status](https://secure.travis-ci.org/cdepillabout/termonad.svg)](http://travis-ci.org/cdepillabout/termonad) [![Hackage](https://img.shields.io/hackage/v/termonad.svg)](https://hackage.haskell.org/package/termonad) [![Stackage LTS](http://stackage.org/package/termonad/badge/lts)](http://stackage.org/lts/package/termonad) [![Stackage Nightly](http://stackage.org/package/termonad/badge/nightly)](http://stackage.org/nightly/package/termonad) [![BSD3 license](https://img.shields.io/badge/license-BSD3-blue.svg)](./LICENSE) [![Join the chat at https://gitter.im/termonad/Lobby](https://badges.gitter.im/termonad/Lobby.svg)](https://gitter.im/termonad/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) [![Join the chat in #termonad on irc.freenode.net](https://img.shields.io/badge/%23termonad-irc.freenode.net-brightgreen.svg)](https://webchat.freenode.net/) Termonad is a terminal emulator configurable in Haskell. It is extremely customizable and provides hooks to modify the default behavior. It can be thought of as the "XMonad" of terminal emulators. ![image of Termonad](./img/termonad.png) **Table of Contents** - [Termonad](#termonad) - [Installation](#installation) - [Arch Linux](#arch-linux) - [Ubuntu / Debian](#ubuntu--debian) - [Nix](#nix) - [Mac OS X](#mac-os-x) - [Installing with just `stack`](#installing-with-just-stack) - [Installing with just `nix`](#installing-with-just-nix) - [Installing with `stack` using `nix`](#installing-with-stack-using-nix) - [Windows](#windows) - [How to use Termonad](#how-to-use-termonad) - [Default Key Bindings](#default-key-bindings) - [Configuring Termonad](#configuring-termonad) - [Compiling Local Settings](#compiling-local-settings) - [Running with `stack`](#running-with-stack) - [Running with `nix`](#running-with-nix) - [Goals](#goals) - [Where to get help](#where-to-get-help) - [Contributions](#contributions) - [Maintainers](#maintainers) ## Installation Termonad can be installed on any system as long as the necessary GTK libraries are available. The following are instructions for installing Termonad on a few different distributions and systems. If the given steps don't work for you, or you want to add instructions for an additional system, please send a pull request. The following steps use the [`stack`](https://docs.haskellstack.org/en/stable/README/) build tool to build Termonad, but [`cabal`](https://www.haskell.org/cabal/) can be used as well. Steps for installing `stack` can be found on [this page](https://docs.haskellstack.org/en/stable/install_and_upgrade/). ### Arch Linux First, you must install the required GTK system libraries: ```sh $ pacman -S vte3 gobject-introspection ``` In order to install Termonad, clone this repository and run `stack install`. This will install the `termonad` binary to `~/.local/bin/`: ```sh $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ stack install ``` ### Ubuntu / Debian First, you must install the required GTK system libraries: ```sh $ apt-get install gobject-introspection libgirepository1.0-dev libgtk-3-dev libvte-2.91-dev libpcre2-dev ``` In order to install Termonad, clone this repository and run `stack install`. This will install the `termonad` binary to `~/.local/bin/`: ```sh $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ stack install ``` ### Nix If you have `nix` installed, you should be able to use it to build Termonad. This means that it will work on NixOS, or with `nix` on another distro. There are two different ways to use `nix` to build Termonad: The first is using `stack`. The following commands install `stack` for your user, clone this repository, and install the `termonad` binary to `~/.local/bin/`: ```sh $ nix-env -i stack $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ stack --nix install ``` (_edit_: Building with `stack` using Nix-integration does not currently work. See [#99](https://github.com/cdepillabout/termonad/issues/99).) The second is using the normal `nix-build` machinery. The following commands clone this repository and build the `termonad` binary at `./result/bin/`: ```sh $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ nix-build ``` ### Mac OS X Building and installing Termonad on Mac OS X should be possible with any of the following three methods: - Install the required system libraries (like GTK and VTE) by hand, then use `stack` to build Termonad. This is probably the easiest method. You don't have to understand anything about `nix`. However, it is slightly annoying to have to install GTK and VTE by hand. - Use `nix` to install both the required system libraries and Termonad itself. If you are a nix user and want an easy way to install Termonad, this is the recommended method. - Use `nix` to install install the required system libraries, and `stack` to build Termonad. If you are a nix user, but want to use `stack` to actually do development on Termonad, using `stack` may be easier than using `cabal`. The following sections describe each method. #### Installing with just `stack` (*currently no instructions available. please send a PR adding instructions if you get termonad to build using this method.*) #### Installing with just `nix` `nix` can be used to install Termonad with the following steps, assuming you have `nix` [installed](https://nixos.org/nix/download.html). These commands clone this repository and build the `termonad` binary at `./result/bin/`: ```sh $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ nix-build ``` #### Installing with `stack` using `nix` `stack` can be used in conjunction with `nix` to install Termonad. `nix` will handle installing system dependencies (like GTK and VTE), while `stack` will handle compiling and installing Haskell packages. You must have `nix` [installed](https://nixos.org/nix/download.html). You will also need `stack` installed. You can do that with the following command: ```sh $ nix-env -i stack ``` After `stack` is installed, you will need to clone Termonad and build it: ``` $ git clone https://github.com/cdepillabout/termonad $ cd termonad/ $ stack --nix install ``` This will install the `termonad` binary to `~/.local/bin/`. ### Windows (*currently no instructions available. please send a PR adding instructions if you get termonad to build.*) ## How to use Termonad Termonad is similar to XMonad. The above steps will install a `termonad` binary somewhere on your system. If you have installed Termonad using `stack`, the `termonad` binary will be in `~/.local/bin/`. This binary is a version of Termonad configured with default settings. You can try running it to get an idea of what Termonad is like: ```sh $ ~/.local/bin/termonad ``` The following section describes the default key bindings. If you would like to configure Termonad with your own settings, first you will need to create a Haskell file called `~/.config/termonad/termonad.hs`. A following section gives an example configuration file. If this configuration file exists, when the `~/.local/bin/termonad` binary launches, it will try to use GHC to compile the configuration file. If GHC is able to successfully compile the configuration file, a separate binary will be created called something like `~/.cache/termonad/termonad-linux-x86_64`. This binary file can be thought of as your own personal Termonad, configured with all your own settings. When you run `~/.local/bin/termonad`, it will re-exec `~/.cache/termonad/termonad-linux-x86_64` if it exists. However, there is one difficulty with this setup. In order for the `~/.local/bin/termonad` binary to be able to compile your `~/.config/termonad/termonad.hs` configuration file, Termonad needs to know where GHC is, as well as where all your Haskell packages live. This presents some difficulties that will be discussed in a following section. ### Default Key Bindings Termonad provides the following default key bindings. | Key binding | Action | |------------|--------| | Ctrl Shift t | Open new tab. | | Ctrl Shift w | Close tab. | | Ctrl Shift f | Open Find dialog for searching for a regex. | | Ctrl Shift p | Find the regex **above** the current position. | | Ctrl Shift i | Find the regex **below** the current position. | | Ctrl + | Increase font size. | | Ctrl - | Decrease font size. | | Alt (number key) | Switch to tab `number`. For example, Alt 2 switches to tab 2. | ### Configuring Termonad Termonad has two different ways to be configured. The first way is to use the built-in Preferences editor. You can find this in the `Preferences` menu under `Edit` in the menubar. When opening Termonad for the first time, it will create a preferences file at `~/.config/termonad/termonad.yaml`. When you change a setting in the Preferences editor, Termonad will update the setting in the preferences file. When running Termonad, it will load settings from the preferences file. Do not edit the preferences file by hand, because it will be overwritten when updating settings in the Preferences editor. This method is perfect for users who only want to make small changes to the Termonad settings, like the default font size. The second way to configure Termonad is to use a Haskell-based settings file, called `~/.config/termonad/termonad.hs` by default. This method allows you to make large, sweeping changes to Termonad. This method is recommended for power users. **WARNING: If you have a `~/.config/termonad/termonad.hs` file, then all settings from `~/.config/termonad/termonad.yaml` will be ignored. If you want to set *ANY* settings in `~/.config/termonad/termonad.hs`, then you must set *ALL* settings in `~/.config/termonad/termonad.hs`.** The following is an example Termonad configuration file. You should save this to `~/.config/termonad/termonad.hs`. You can find more information on the available configuration options within the [`Termonad.Config`](https://hackage.haskell.org/package/termonad/docs/Termonad-Config.html) module. ```haskell {-# LANGUAGE OverloadedStrings #-} module Main where import Termonad.App (defaultMain) import Termonad.Config ( FontConfig, FontSize(FontSizePoints), Option(Set) , ShowScrollbar(ShowScrollbarAlways), defaultConfigOptions, defaultFontConfig , defaultTMConfig, fontConfig, fontFamily, fontSize, options, showScrollbar ) import Termonad.Config.Colour ( AlphaColour, ColourConfig, addColourExtension, createColour , createColourExtension, cursorBgColour, defaultColourConfig ) -- | This sets the color of the cursor in the terminal. -- -- This uses the "Data.Colour" module to define a dark-red color. -- There are many default colors defined in "Data.Colour.Names". cursBgColour :: AlphaColour Double cursBgColour = createColour 204 0 0 -- | This sets the colors used for the terminal. We only specify the background -- color of the cursor. colConf :: ColourConfig (AlphaColour Double) colConf = defaultColourConfig { cursorBgColour = Set cursBgColour } -- | This defines the font for the terminal. fontConf :: FontConfig fontConf = defaultFontConfig { fontFamily = "DejaVu Sans Mono" , fontSize = FontSizePoints 13 } main :: IO () main = do colExt <- createColourExtension colConf let termonadConf = defaultTMConfig { options = defaultConfigOptions { fontConfig = fontConf -- Make sure the scrollbar is always visible. , showScrollbar = ShowScrollbarAlways } } `addColourExtension` colExt defaultMain termonadConf ``` There are other example configuration files in the [example-config/](./example-config) directory. If you want to test what all the colors look like, you may find it convenient to use the [`print-console-colors`](http://hackage.haskell.org/package/print-console-colors) package, which provides an executable called `print-console-colors` that prints all of the colors for your terminal. ### Compiling Local Settings If you launch Termonad by calling `~/.local/bin/termonad`, it will try to compile the `~/.config/termonad/termonad.hs` file if it exists. The problem is that `~/.local/bin/termonad` needs to be able to see GHC and the required Haskell libraries to be able to compile `~/.config/termonad/termonad.hs`. There are a couple solutions to this problem, listed in the sections below. (These steps are definitely confusing. I would love to figure out a better way to do this. Please submit an issue or PR if you have a good idea about how to fix this.) #### Running with `stack` If you originally compiled Termonad with `stack`, you can use `stack` to execute Termonad. First, you must change to the directory with the Termonad source code. From there, you can run `stack exec`: ```sh $ cd termonad/ # change to the termonad source code directory $ stack exec -- termonad ``` `stack` will pick up the correct GHC version and libraries from the `stack.yaml` and `termonad.cabal` file. `termonad` will be run in an environment with GHC available. `termonad` will use this GHC and libraries to compile your `~/.config/termonad/termonad.hs` file. It if succeeds, it should create a `~/.cache/termonad/termonad-linux-x86_64` binary. If you need extra Haskell libraries available when compiling your `~/.config/termonad/termonad.hs` file, you can specify them to `stack exec`: ```sh $ stack exec --package lens --package conduit -- termonad ``` The problem with this is that `stack exec` changes quite a few of your environment variables. It is not recommended to actually run Termonad from within `stack exec`. After you run `stack exec -- termonad` and let it recompile your `~/.config/termonad/termonad.hs` file, exit Termonad. Re-run Termonad by calling it directly. Termonad will notice that `~/.config/termonad/termonad.hs` hasn't changed since `~/.cache/termonad/termonad-linux-x86_64` has been recompiled, so it will directly execute `~/.cache/termonad/termonad-linux-x86_64`. #### Running with `nix` Building Termonad with `nix` (by running `nix-build` in the top directory) sets it up so that Termonad can see GHC. Termonad should be able to compile the `~/.config/termonad/termonad.hs` file by default. If you're interested in how this works, or want to change which Haskell packages are available from your `~/.config/termonad/termonad.hs` file, please see the documentation in the [`.nix-helpers/termonad-with-packages.nix`](./.nix-helpers/termonad-with-packages.nix) file. ## Goals Termonad has the following goals: * fully configurable in Haskell There are already [many](https://gnometerminator.blogspot.com/p/introduction.html) [good](https://www.enlightenment.org/about-terminology.md) [terminal](http://software.schmorp.de/pkg/rxvt-unicode.html) [emulators](https://launchpad.net/sakura). However, there are no terminal emulators fully configurable in Haskell. Termonad fills this niche. * flexible Most people only need a terminal emulator that lets you change the font-size, cursor color, etc. They don't need tons of configuration options. Termonad should be for people that like lots of configuration options. Termonad should provide many hooks to allow the user full control over its behavior. * stable Termonad should be able to be used everyday as your main terminal emulator. It should not crash for any reason. If you experience a crash, please file an issue or a pull request! * good documentation The [documentation](https://hackage.haskell.org/package/termonad) for Termonad on Hackage should be good. You shouldn't have to guess at what certain data types or functions do. If you have a hard time understanding anything in the documentation, please submit an issue or PR. ## Where to get help If you find a bug in Termonad, please either [send a PR](https://github.com/cdepillabout/termonad/pulls) fixing it or create an [issue](https://github.com/cdepillabout/termonad/issues) explaining it. If you just need help with configuring Termonad, you can either join the [Gitter room](https://gitter.im/termonad/Lobby) or [#termonad on irc.freenode.net](https://webchat.freenode.net/). ## Contributions Contributions are highly appreciated. Termonad is currently missing many helpful configuration options and behavior hooks. If there is something you would like to add, please submit an issue or PR. ## Maintainers - [cdepillabout](https://github.com/cdepillabout) - [LSLeary](https://github.com/LSLeary)