{-# OPTIONS_HADDOCK hide #-}
-- | Combinators for constructing properties.
{-# LANGUAGE CPP #-}
#ifndef NO_TYPEABLE
{-# LANGUAGE DeriveDataTypeable #-}
#endif
#ifndef NO_SAFE_HASKELL
{-# LANGUAGE Safe #-}
#endif
module Test.QuickCheck.Property where

--------------------------------------------------------------------------
-- imports

import Test.QuickCheck.Gen
import Test.QuickCheck.Gen.Unsafe
import Test.QuickCheck.Arbitrary
import Test.QuickCheck.Text( isOneLine, putLine )
import Test.QuickCheck.Exception
import Test.QuickCheck.State( State(terminal), Confidence(..) )

#ifndef NO_TIMEOUT
import System.Timeout(timeout)
#endif
import Data.Maybe
import Control.Applicative
import Control.Monad
import qualified Data.Map as Map
import Data.Map(Map)
import qualified Data.Set as Set
import Data.Set(Set)
#ifndef NO_DEEPSEQ
import Control.DeepSeq
#endif
#ifndef NO_TYPEABLE
import Data.Typeable (Typeable)
#endif
import Data.Maybe

--------------------------------------------------------------------------
-- fixities

infixr 0 ==>
infixr 1 .&.
infixr 1 .&&.
infixr 1 .||.

-- The story for exception handling:
--
-- To avoid insanity, we have rules about which terms can throw
-- exceptions when we evaluate them:
--   * A rose tree must evaluate to WHNF without throwing an exception
--   * The 'ok' component of a Result must evaluate to Just True or
--     Just False or Nothing rather than raise an exception
--   * IORose _ must never throw an exception when executed
--
-- Both rose trees and Results may loop when we evaluate them, though,
-- so we have to be careful not to force them unnecessarily.
--
-- We also have to be careful when we use fmap or >>= in the Rose
-- monad that the function we supply is total, or else use
-- protectResults afterwards to install exception handlers. The
-- mapResult function on Properties installs an exception handler for
-- us, though.
--
-- Of course, the user is free to write "error "ha ha" :: Result" if
-- they feel like it. We have to make sure that any user-supplied Rose
-- Results or Results get wrapped in exception handlers, which we do by:
--   * Making the 'property' function install an exception handler
--     round its argument. This function always gets called in the
--     right places, because all our Property-accepting functions are
--     actually polymorphic over the Testable class so they have to
--     call 'property'.
--   * Installing an exception handler round a Result before we put it
--     in a rose tree (the only place Results can end up).

--------------------------------------------------------------------------
-- * Property and Testable types

-- | The type of properties.
newtype Property = MkProperty { unProperty :: Gen Prop }
#ifndef NO_TYPEABLE
  deriving (Typeable)
#endif

-- | The class of properties, i.e., types which QuickCheck knows how to test.
-- Typically a property will be a function returning 'Bool' or 'Property'.
--
-- If a property does no quantification, i.e. has no
-- parameters and doesn't use 'forAll', it will only be tested once.
-- This may not be what you want if your property is an @IO Bool@.
-- You can change this behaviour using the 'again' combinator.
class Testable prop where
  -- | Convert the thing to a property.
  property :: prop -> Property

  -- | Optional; used internally in order to improve shrinking.
  -- Tests a property but also quantifies over an extra value
  -- (with a custom shrink and show function).
  -- The 'Testable' instance for functions defines
  -- @propertyForAllShrinkShow@ in a way that improves shrinking.
  propertyForAllShrinkShow :: Gen a -> (a -> [a]) -> (a -> [String]) -> (a -> prop) -> Property
  propertyForAllShrinkShow gen shr shw f =
    forAllShrinkBlind gen shr $
      \x -> foldr counterexample (property (f x)) (shw x)

-- | If a property returns 'Discard', the current test case is discarded,
-- the same as if a precondition was false.
--
-- An example is the definition of '==>':
--
-- > (==>) :: Testable prop => Bool -> prop -> Property
-- > False ==> _ = property Discard
-- > True  ==> p = property p
data Discard = Discard

instance Testable Discard where
  property _ = property rejected

-- This instance is here to make it easier to turn IO () into a Property.
instance Testable () where
  property = property . liftUnit
    where
      -- N.B. the unit gets forced only inside 'property',
      -- so that we turn exceptions into test failures
      liftUnit () = succeeded

instance Testable prop => Testable (Maybe prop) where
  property = property . liftMaybe
    where
      -- See comment for liftUnit above
      liftMaybe Nothing = property Discard
      liftMaybe (Just prop) = property prop

instance Testable Bool where
  property = property . liftBool

instance Testable Result where
  property = MkProperty . return . MkProp . protectResults . return

instance Testable Prop where
  property p = MkProperty . return . protectProp $ p

instance Testable prop => Testable (Gen prop) where
  property mp = MkProperty $ do p <- mp; unProperty (again p)

instance Testable Property where
  property (MkProperty mp) = MkProperty (fmap protectProp mp)

-- | Do I/O inside a property.
{-# DEPRECATED morallyDubiousIOProperty "Use 'ioProperty' instead" #-}
morallyDubiousIOProperty :: Testable prop => IO prop -> Property
morallyDubiousIOProperty = ioProperty

-- | Do I/O inside a property.
--
-- Warning: any random values generated inside of the argument to @ioProperty@
-- will not currently be shrunk. For best results, generate all random values
-- before calling @ioProperty@, or use 'idempotentIOProperty' if that is safe.
--
-- Note: if your property does no quantification, it will only be tested once.
-- To test it repeatedly, use 'again'.
ioProperty :: Testable prop => IO prop -> Property
ioProperty prop = idempotentIOProperty (fmap noShrinking prop)

-- | Do I/O inside a property.
--
-- Warning: during shrinking, the I/O may not always be re-executed.
-- Instead, the I/O may be executed once and then its result retained.
-- If this is not acceptable, use 'ioProperty' instead.
idempotentIOProperty :: Testable prop => IO prop -> Property
idempotentIOProperty =
  MkProperty . fmap (MkProp . ioRose . fmap unProp) .
  promote . fmap (unProperty . property)

instance (Arbitrary a, Show a, Testable prop) => Testable (a -> prop) where
  property f =
    propertyForAllShrinkShow arbitrary shrink (return . show) f
  propertyForAllShrinkShow gen shr shw f =
    -- gen :: Gen b, shr :: b -> [b], f :: b -> a -> prop
    -- Idea: Generate and shrink (b, a) as a pair
    propertyForAllShrinkShow
      (liftM2 (,) gen arbitrary)
      (liftShrink2 shr shrink)
      (\(x, y) -> shw x ++ [show y])
      (uncurry f)

-- ** Exception handling
protect :: (AnException -> a) -> IO a -> IO a
protect f x = either f id `fmap` tryEvaluateIO x

--------------------------------------------------------------------------
-- ** Type Prop

newtype Prop = MkProp{ unProp :: Rose Result }

-- ** type Rose

data Rose a = MkRose a [Rose a] | IORose (IO (Rose a))
-- Only use IORose if you know that the argument is not going to throw an exception!
-- Otherwise, try ioRose.
ioRose :: IO (Rose Result) -> Rose Result
ioRose = IORose . protectRose

joinRose :: Rose (Rose a) -> Rose a
joinRose (IORose rs) = IORose (fmap joinRose rs)
joinRose (MkRose (IORose rm) rs) = IORose $ do r <- rm; return (joinRose (MkRose r rs))
joinRose (MkRose (MkRose x ts) tts) =
  -- first shrinks outer quantification; makes most sense
  MkRose x (map joinRose tts ++ ts)
  -- first shrinks inner quantification: terrible
  --MkRose x (ts ++ map joinRose tts)

instance Functor Rose where
  -- f must be total
  fmap f (IORose rs)   = IORose (fmap (fmap f) rs)
  fmap f (MkRose x rs) = MkRose (f x) [ fmap f r | r <- rs ]

instance Applicative Rose where
  pure = return
  -- f must be total
  (<*>) = liftM2 ($)

instance Monad Rose where
  return x = MkRose x []
  -- k must be total
  m >>= k  = joinRose (fmap k m)

-- | Execute the "IORose" bits of a rose tree, returning a tree
-- constructed by MkRose.
reduceRose :: Rose Result -> IO (Rose Result)
reduceRose r@(MkRose _ _) = return r
reduceRose (IORose m) = m >>= reduceRose

-- | Apply a function to the outermost MkRose constructor of a rose tree.
-- The function must be total!
onRose :: (a -> [Rose a] -> Rose a) -> Rose a -> Rose a
onRose f (MkRose x rs) = f x rs
onRose f (IORose m) = IORose (fmap (onRose f) m)

-- | Wrap a rose tree in an exception handler.
protectRose :: IO (Rose Result) -> IO (Rose Result)
protectRose = protect (return . exception "Exception")

-- | Wrap the top level of a 'Prop' in an exception handler.
protectProp :: Prop -> Prop
protectProp (MkProp r) = MkProp (IORose . protectRose . return $ r)

-- | Wrap all the Results in a rose tree in exception handlers.
protectResults :: Rose Result -> Rose Result
protectResults = onRose $ \x rs ->
  IORose $ do
    y <- protectResult (return x)
    return (MkRose y (map protectResults rs))

-- ** Result type

-- | Different kinds of callbacks
data Callback
  = PostTest CallbackKind (State -> Result -> IO ())         -- ^ Called just after a test
  | PostFinalFailure CallbackKind (State -> Result -> IO ()) -- ^ Called with the final failing test-case
data CallbackKind = Counterexample    -- ^ Affected by the 'verbose' combinator
                  | NotCounterexample -- ^ Not affected by the 'verbose' combinator

-- | The result of a single test.
data Result
  = MkResult
  { ok                 :: Maybe Bool
    -- ^ result of the test case; Nothing = discard
  , expect             :: Bool
    -- ^ indicates what the expected result of the property is
  , reason             :: String
    -- ^ a message indicating what went wrong
  , theException       :: Maybe AnException
    -- ^ the exception thrown, if any
  , abort              :: Bool
    -- ^ if True, the test should not be repeated
  , maybeNumTests      :: Maybe Int
    -- ^ stop after this many tests
  , maybeCheckCoverage :: Maybe Confidence
    -- ^ required coverage confidence
  , labels             :: [String]
    -- ^ test case labels
  , classes            :: [String]
    -- ^ test case classes
  , tables             :: [(String, String)]
    -- ^ test case tables
  , requiredCoverage   :: [(Maybe String, String, Double)]
    -- ^ required coverage
  , callbacks          :: [Callback]
    -- ^ the callbacks for this test case
  , testCase           :: [String]
    -- ^ the generated test case
  }

exception :: String -> AnException -> Result
exception msg err
  | isDiscard err = rejected
  | otherwise = failed{ reason = formatException msg err,
                        theException = Just err }

formatException :: String -> AnException -> String
formatException msg err = msg ++ ":" ++ format (show err)
  where format xs | isOneLine xs = " '" ++ xs ++ "'"
                  | otherwise = "\n" ++ unlines [ "  " ++ l | l <- lines xs ]

protectResult :: IO Result -> IO Result
protectResult = protect (exception "Exception")

succeeded, failed, rejected :: Result
(succeeded, failed, rejected) =
  (result{ ok = Just True },
   result{ ok = Just False },
   result{ ok = Nothing })
  where
    result =
      MkResult
      { ok                 = undefined
      , expect             = True
      , reason             = ""
      , theException       = Nothing
      , abort              = True
      , maybeNumTests      = Nothing
      , maybeCheckCoverage = Nothing
      , labels             = []
      , classes            = []
      , tables             = []
      , requiredCoverage   = []
      , callbacks          = []
      , testCase           = []
      }

--------------------------------------------------------------------------
-- ** Lifting and mapping functions

liftBool :: Bool -> Result
liftBool True = succeeded
liftBool False = failed { reason = "Falsified" }

mapResult :: Testable prop => (Result -> Result) -> prop -> Property
mapResult f = mapRoseResult (protectResults . fmap f)

mapTotalResult :: Testable prop => (Result -> Result) -> prop -> Property
mapTotalResult f = mapRoseResult (fmap f)

-- f here mustn't throw an exception (rose tree invariant).
mapRoseResult :: Testable prop => (Rose Result -> Rose Result) -> prop -> Property
mapRoseResult f = mapProp (\(MkProp t) -> MkProp (f t))

mapProp :: Testable prop => (Prop -> Prop) -> prop -> Property
mapProp f = MkProperty . fmap f . unProperty . property

--------------------------------------------------------------------------
-- ** Property combinators

-- | Adjust the test case size for a property, by transforming it with the given
-- function.
mapSize :: Testable prop => (Int -> Int) -> prop -> Property
mapSize f = property . scale f . unProperty . property

-- | Shrinks the argument to a property if it fails. Shrinking is done
-- automatically for most types. This function is only needed when you want to
-- override the default behavior.
shrinking :: Testable prop =>
             (a -> [a])  -- ^ 'shrink'-like function.
          -> a           -- ^ The original argument
          -> (a -> prop) -> Property
shrinking shrinker x0 pf = MkProperty (fmap (MkProp . joinRose . fmap unProp) (promote (props x0)))
 where
  props x =
    MkRose (unProperty (property (pf x))) [ props x' | x' <- shrinker x ]

-- | Disables shrinking for a property altogether.
-- Only quantification /inside/ the call to 'noShrinking' is affected.
noShrinking :: Testable prop => prop -> Property
noShrinking = mapRoseResult (onRose (\res _ -> MkRose res []))

-- | Adds a callback
callback :: Testable prop => Callback -> prop -> Property
callback cb = mapTotalResult (\res -> res{ callbacks = cb : callbacks res })

-- | Adds the given string to the counterexample if the property fails.
counterexample :: Testable prop => String -> prop -> Property
counterexample s =
  mapTotalResult (\res -> res{ testCase = s:testCase res }) .
  callback (PostFinalFailure Counterexample $ \st _res -> do
    s <- showCounterexample s
    putLine (terminal st) s)

showCounterexample :: String -> IO String
showCounterexample s = do
  let force [] = return ()
      force (x:xs) = x `seq` force xs
  res <- tryEvaluateIO (force s)
  return $
    case res of
      Left err ->
        formatException "Exception thrown while showing test case" err
      Right () ->
        s

-- | Adds the given string to the counterexample if the property fails.
{-# DEPRECATED printTestCase "Use counterexample instead" #-}
printTestCase :: Testable prop => String -> prop -> Property
printTestCase = counterexample

-- | Performs an 'IO' action after the last failure of a property.
whenFail :: Testable prop => IO () -> prop -> Property
whenFail m =
  callback $ PostFinalFailure NotCounterexample $ \_st _res ->
    m

-- | Performs an 'IO' action every time a property fails. Thus,
-- if shrinking is done, this can be used to keep track of the
-- failures along the way.
whenFail' :: Testable prop => IO () -> prop -> Property
whenFail' m =
  callback $ PostTest NotCounterexample $ \_st res ->
    if ok res == Just False
      then m
      else return ()

-- | Prints out the generated testcase every time the property is tested.
-- Only variables quantified over /inside/ the 'verbose' are printed.
verbose :: Testable prop => prop -> Property
verbose = mapResult (\res -> res { callbacks = newCallback (callbacks res):callbacks res })
  where newCallback cbs =
          PostTest Counterexample $ \st res -> do
            putLine (terminal st) (status res ++ ":")
            sequence_ [ f st res | PostFinalFailure Counterexample f <- cbs ]
            putLine (terminal st) ""
        status MkResult{ok = Just True} = "Passed"
        status MkResult{ok = Just False} = "Failed"
        status MkResult{ok = Nothing} = "Skipped (precondition false)"

-- | Prints out the generated testcase every time the property fails, including during shrinking.
-- Only variables quantified over /inside/ the 'verboseShrinking' are printed.
verboseShrinking :: Testable prop => prop -> Property
verboseShrinking = mapResult (\res -> res { callbacks = newCallback (callbacks res):callbacks res })
  where newCallback cbs =
          PostTest Counterexample $ \st res ->
            when (ok res == Just False) $ do
              putLine (terminal st) "Failed:"
              sequence_ [ f st res | PostFinalFailure Counterexample f <- cbs ]
              putLine (terminal st) ""

-- | Indicates that a property is supposed to fail.
-- QuickCheck will report an error if it does not fail.
expectFailure :: Testable prop => prop -> Property
expectFailure = mapTotalResult (\res -> res{ expect = False })

-- | Modifies a property so that it only will be tested once.
-- Opposite of 'again'.
once :: Testable prop => prop -> Property
once = mapTotalResult (\res -> res{ abort = True })

-- | Modifies a property so that it will be tested repeatedly.
-- Opposite of 'once'.
again :: Testable prop => prop -> Property
again = mapTotalResult (\res -> res{ abort = False })

-- | Configures how many times a property will be tested.
--
-- For example,
--
-- > quickCheck (withMaxSuccess 1000 p)
--
-- will test @p@ up to 1000 times.
withMaxSuccess :: Testable prop => Int -> prop -> Property
withMaxSuccess n = n `seq` mapTotalResult (\res -> res{ maybeNumTests = Just n })

-- | Check that all coverage requirements defined by 'cover' and 'coverTable'
-- are met, using a statistically sound test, and fail if they are not met.
--
-- Ordinarily, a failed coverage check does not cause the property to fail.
-- This is because the coverage requirement is not tested in a statistically
-- sound way. If you use 'cover' to express that a certain value must appear 20%
-- of the time, QuickCheck will warn you if the value only appears in 19 out of
-- 100 test cases - but since the coverage varies randomly, you may have just
-- been unlucky, and there may not be any real problem with your test
-- generation.
--
-- When you use 'checkCoverage', QuickCheck uses a statistical test to account
-- for the role of luck in coverage failures. It will run as many tests as
-- needed until it is sure about whether the coverage requirements are met. If a
-- coverage requirement is not met, the property fails.
--
-- Example:
--
-- > quickCheck (checkCoverage prop_foo)
checkCoverage :: Testable prop => prop -> Property
checkCoverage = checkCoverageWith stdConfidence

-- | Check coverage requirements using a custom confidence level.
-- See 'stdConfidence'.
--
-- An example of making the statistical test less stringent in order to improve
-- performance:
--
-- > quickCheck (checkCoverageWith stdConfidence{certainty = 10^6} prop_foo)
checkCoverageWith :: Testable prop => Confidence -> prop -> Property
checkCoverageWith confidence =
  certainty confidence `seq`
  tolerance confidence `seq`
  mapTotalResult (\res -> res{ maybeCheckCoverage = Just confidence })

-- | The standard parameters used by 'checkCoverage': @certainty = 10^9@,
-- @tolerance = 0.9@. See 'Confidence' for the meaning of the parameters.
stdConfidence :: Confidence
stdConfidence =
  Confidence {
    certainty = 10^9,
    tolerance = 0.9 }

-- | Attaches a label to a test case. This is used for reporting
-- test case distribution.
--
-- For example:
--
-- > prop_reverse_reverse :: [Int] -> Property
-- > prop_reverse_reverse xs =
-- >   label ("length of input is " ++ show (length xs)) $
-- >     reverse (reverse xs) === xs
--
-- >>> quickCheck prop_reverse_reverse
-- +++ OK, passed 100 tests:
-- 7% length of input is 7
-- 6% length of input is 3
-- 5% length of input is 4
-- 4% length of input is 6
-- ...
--
-- Each use of 'label' in your property results in a separate
-- table of test case distribution in the output. If this is
-- not what you want, use 'tabulate'.
label :: Testable prop => String -> prop -> Property
label s =
#ifndef NO_DEEPSEQ
  s `deepseq`
#endif
  mapTotalResult $
    \res -> res { labels = s:labels res }

-- | Attaches a label to a test case. This is used for reporting
-- test case distribution.
--
-- > collect x = label (show x)
--
-- For example:
--
-- > prop_reverse_reverse :: [Int] -> Property
-- > prop_reverse_reverse xs =
-- >   collect (length xs) $
-- >     reverse (reverse xs) === xs
--
-- >>> quickCheck prop_reverse_reverse
-- +++ OK, passed 100 tests:
-- 7% 7
-- 6% 3
-- 5% 4
-- 4% 6
-- ...
--
-- Each use of 'collect' in your property results in a separate
-- table of test case distribution in the output. If this is
-- not what you want, use 'tabulate'.
collect :: (Show a, Testable prop) => a -> prop -> Property
collect x = label (show x)

-- | Reports how many test cases satisfy a given condition.
--
-- For example:
--
-- > prop_sorted_sort :: [Int] -> Property
-- > prop_sorted_sort xs =
-- >   sorted xs ==>
-- >   classify (length xs > 1) "non-trivial" $
-- >   sort xs === xs
--
-- >>> quickCheck prop_sorted_sort
-- +++ OK, passed 100 tests (22% non-trivial).
classify :: Testable prop =>
            Bool    -- ^ @True@ if the test case should be labelled.
         -> String  -- ^ Label.
         -> prop -> Property
classify False _ = property
classify True s =
#ifndef NO_DEEPSEQ
  s `deepseq`
#endif
  mapTotalResult $
    \res -> res { classes = s:classes res }

-- | Checks that at least the given proportion of /successful/ test
-- cases belong to the given class. Discarded tests (i.e. ones
-- with a false precondition) do not affect coverage.
--
-- __Note:__ If the coverage check fails, QuickCheck prints out a warning, but
-- the property does /not/ fail. To make the property fail, use 'checkCoverage'.
--
-- For example:
--
-- > prop_sorted_sort :: [Int] -> Property
-- > prop_sorted_sort xs =
-- >   sorted xs ==>
-- >   cover 50 (length xs > 1) "non-trivial" $
-- >   sort xs === xs
--
-- >>> quickCheck prop_sorted_sort
-- +++ OK, passed 100 tests; 135 discarded (26% non-trivial).
-- <BLANKLINE>
-- Only 26% non-trivial, but expected 50%
cover :: Testable prop =>
         Double -- ^ The required percentage (0-100) of test cases.
      -> Bool   -- ^ @True@ if the test case belongs to the class.
      -> String -- ^ Label for the test case class.
      -> prop -> Property
cover p x s = mapTotalResult f . classify x s
  where
    f res = res { requiredCoverage = (Nothing, s, p/100):requiredCoverage res }

-- | Collects information about test case distribution into a table.
-- The arguments to 'tabulate' are the table's name and a list of values
-- associated with the current test case. After testing, QuickCheck prints the
-- frequency of all collected values. The frequencies are expressed as a
-- percentage of the total number of values collected.
--
-- You should prefer 'tabulate' to 'label' when each test case is associated
-- with a varying number of values. Here is a (not terribly useful) example,
-- where the test data is a list of integers and we record all values that
-- occur in the list:
--
-- > prop_sorted_sort :: [Int] -> Property
-- > prop_sorted_sort xs =
-- >   sorted xs ==>
-- >   tabulate "List elements" (map show xs) $
-- >   sort xs === xs
--
-- >>> quickCheck prop_sorted_sort
-- +++ OK, passed 100 tests; 1684 discarded.
-- <BLANKLINE>
-- List elements (109 in total):
--  3.7% 0
--  3.7% 17
--  3.7% 2
--  3.7% 6
--  2.8% -6
--  2.8% -7
--
-- Here is a more useful example. We are testing a chatroom, where the user can
-- log in, log out, or send a message:
--
-- > data Command = LogIn | LogOut | SendMessage String deriving (Data, Show)
-- > instance Arbitrary Command where ...
--
-- There are some restrictions on command sequences; for example, the user must
-- log in before doing anything else. The function @valid :: [Command] -> Bool@
-- checks that a command sequence is allowed. Our property then has the form:
--
-- > prop_chatroom :: [Command] -> Property
-- > prop_chatroom cmds =
-- >   valid cmds ==>
-- >     ...
--
-- The use of '==>' may skew test case distribution. We use 'collect' to see the
-- length of the command sequences, and 'tabulate' to get the frequencies of the
-- individual commands:
--
-- > prop_chatroom :: [Command] -> Property
-- > prop_chatroom cmds =
-- >   wellFormed cmds LoggedOut ==>
-- >   'collect' (length cmds) $
-- >   'tabulate' "Commands" (map (show . 'Data.Data.toConstr') cmds) $
-- >     ...
--
-- >>> quickCheckWith stdArgs{maxDiscardRatio = 1000} prop_chatroom
-- +++ OK, passed 100 tests; 2775 discarded:
-- 60% 0
-- 20% 1
-- 15% 2
--  3% 3
--  1% 4
--  1% 5
-- <BLANKLINE>
-- Commands (68 in total):
-- 62% LogIn
-- 22% SendMessage
-- 16% LogOut
tabulate :: Testable prop => String -> [String] -> prop -> Property
tabulate key values =
#ifndef NO_DEEPSEQ
  key `deepseq` values `deepseq`
#endif
  mapTotalResult $
    \res -> res { tables = [(key, value) | value <- values] ++ tables res }

-- | Checks that the values in a given 'table' appear a certain proportion of
-- the time. A call to 'coverTable' @table@ @[(x1, p1), ..., (xn, pn)]@ asserts
-- that of the values in @table@, @x1@ should appear at least @p1@ percent of
-- the time, @x2@ at least @p2@ percent of the time, and so on.
--
-- __Note:__ If the coverage check fails, QuickCheck prints out a warning, but
-- the property does /not/ fail. To make the property fail, use 'checkCoverage'.
--
-- Continuing the example from the 'tabular' combinator...
--
-- > data Command = LogIn | LogOut | SendMessage String deriving (Data, Show)
-- > prop_chatroom :: [Command] -> Property
-- > prop_chatroom cmds =
-- >   wellFormed cmds LoggedOut ==>
-- >   'tabulate' "Commands" (map (show . 'Data.Data.toConstr') cmds) $
-- >     ...
--
-- ...we can add a coverage requirement as follows, which checks that @LogIn@,
-- @LogOut@ and @SendMessage@ each occur at least 25% of the time:
--
-- > prop_chatroom :: [Command] -> Property
-- > prop_chatroom cmds =
-- >   wellFormed cmds LoggedOut ==>
-- >   coverTable "Commands" [("LogIn", 25), ("LogOut", 25), ("SendMessage", 25)] $
-- >   'tabulate' "Commands" (map (show . 'Data.Data.toConstr') cmds) $
-- >     ... property goes here ...
--
-- >>> quickCheck prop_chatroom
-- +++ OK, passed 100 tests; 2909 discarded:
-- 56% 0
-- 17% 1
-- 10% 2
--  6% 3
--  5% 4
--  3% 5
--  3% 7
-- <BLANKLINE>
-- Commands (111 in total):
-- 51.4% LogIn
-- 30.6% SendMessage
-- 18.0% LogOut
-- <BLANKLINE>
-- Table 'Commands' had only 18.0% LogOut, but expected 25.0%
coverTable :: Testable prop =>
  String -> [(String, Double)] -> prop -> Property
coverTable table xs =
#ifndef NO_DEEPSEQ
  table `deepseq` xs `deepseq`
#endif
  mapTotalResult $
    \res -> res { requiredCoverage = ys ++ requiredCoverage res }
  where
    ys = [(Just table, x, p/100) | (x, p) <- xs]

-- | Implication for properties: The resulting property holds if
-- the first argument is 'False' (in which case the test case is discarded),
-- or if the given property holds. Note that using implication carelessly can
-- severely skew test case distribution: consider using 'cover' to make sure
-- that your test data is still good quality.
(==>) :: Testable prop => Bool -> prop -> Property
False ==> _ = property Discard
True  ==> p = property p

-- | Considers a property failed if it does not complete within
-- the given number of microseconds.
--
-- Note: if the property times out, variables quantified inside the
-- `within` will not be printed. Therefore, you should use `within`
-- only in the body of your property.
--
-- Good: @prop_foo a b c = within 1000000 ...@
--
-- Bad: @prop_foo = within 1000000 $ \\a b c -> ...@
--
-- Bad: @prop_foo a b c = ...; main = quickCheck (within 1000000 prop_foo)@
within :: Testable prop => Int -> prop -> Property
within n = mapRoseResult f
  where
    f rose = ioRose $ do
      let m `orError` x = fmap (fromMaybe x) m
      MkRose res roses <- timeout n (reduceRose rose) `orError`
        return timeoutResult
      res' <- timeout n (protectResult (return res)) `orError`
        timeoutResult
      return (MkRose res' (map f roses))

    timeoutResult = failed { reason = "Timeout" }
#ifdef NO_TIMEOUT
    timeout _ = fmap Just
#endif

-- | Explicit universal quantification: uses an explicitly given
-- test case generator.
forAll :: (Show a, Testable prop)
       => Gen a -> (a -> prop) -> Property
forAll gen pf = forAllShrink gen (\_ -> []) pf

-- | Like 'forAll', but with an explicitly given show function.
forAllShow :: Testable prop
           => Gen a -> (a -> String) -> (a -> prop) -> Property
forAllShow gen shower pf = forAllShrinkShow gen (\_ -> []) shower pf

-- | Like 'forAll', but without printing the generated value.
forAllBlind :: Testable prop
           => Gen a -> (a -> prop) -> Property
forAllBlind gen pf = forAllShrinkBlind gen (\_ -> []) pf

-- | Like 'forAll', but tries to shrink the argument for failing test cases.
forAllShrink :: (Show a, Testable prop)
             => Gen a -> (a -> [a]) -> (a -> prop) -> Property
forAllShrink gen shrinker = forAllShrinkShow gen shrinker show

-- | Like 'forAllShrink', but with an explicitly given show function.
forAllShrinkShow
  :: Testable prop
  => Gen a -> (a -> [a]) -> (a -> String) -> (a -> prop) -> Property
forAllShrinkShow gen shrinker shower pf =
  forAllShrinkBlind gen shrinker (\x -> counterexample (shower x) (pf x))

-- | Like 'forAllShrink', but without printing the generated value.
forAllShrinkBlind
  :: Testable prop
  => Gen a -> (a -> [a]) -> (a -> prop) -> Property
forAllShrinkBlind gen shrinker pf =
  again $
  MkProperty $
  gen >>= \x ->
    unProperty $
    shrinking shrinker x pf

-- | Nondeterministic choice: 'p1' '.&.' 'p2' picks randomly one of
-- 'p1' and 'p2' to test. If you test the property 100 times it
-- makes 100 random choices.
(.&.) :: (Testable prop1, Testable prop2) => prop1 -> prop2 -> Property
p1 .&. p2 =
  again $
  MkProperty $
  arbitrary >>= \b ->
    unProperty $
    counterexample (if b then "LHS" else "RHS") $
      if b then property p1 else property p2

-- | Conjunction: 'p1' '.&&.' 'p2' passes if both 'p1' and 'p2' pass.
(.&&.) :: (Testable prop1, Testable prop2) => prop1 -> prop2 -> Property
p1 .&&. p2 = conjoin [property p1, property p2]

-- | Take the conjunction of several properties.
conjoin :: Testable prop => [prop] -> Property
conjoin ps =
  again $
  MkProperty $
  do roses <- mapM (fmap unProp . unProperty . property) ps
     return (MkProp (conj id roses))
 where
  conj k [] =
    MkRose (k succeeded) []

  conj k (p : ps) = IORose $ do
    rose@(MkRose result _) <- reduceRose p
    case ok result of
      _ | not (expect result) ->
        return (return failed { reason = "expectFailure may not occur inside a conjunction" })
      Just True -> return (conj (addLabels result . addCallbacksAndCoverage result . k) ps)
      Just False -> return rose
      Nothing -> do
        rose2@(MkRose result2 _) <- reduceRose (conj (addCallbacksAndCoverage result . k) ps)
        return $
          -- Nasty work to make sure we use the right callbacks
          case ok result2 of
            Just True -> MkRose (result2 { ok = Nothing }) []
            Just False -> rose2
            Nothing -> rose2

  addCallbacksAndCoverage result r =
    r { callbacks = callbacks result ++ callbacks r,
        requiredCoverage = requiredCoverage result ++ requiredCoverage r }
  addLabels result r =
    r { labels = labels result ++ labels r,
        classes = classes result ++ classes r,
        tables = tables result ++ tables r }

-- | Disjunction: 'p1' '.||.' 'p2' passes unless 'p1' and 'p2' simultaneously fail.
(.||.) :: (Testable prop1, Testable prop2) => prop1 -> prop2 -> Property
p1 .||. p2 = disjoin [property p1, property p2]

-- | Take the disjunction of several properties.
disjoin :: Testable prop => [prop] -> Property
disjoin ps =
  again $
  MkProperty $
  do roses <- mapM (fmap unProp . unProperty . property) ps
     return (MkProp (foldr disj (MkRose failed []) roses))
 where
  disj :: Rose Result -> Rose Result -> Rose Result
  disj p q =
    do result1 <- p
       case ok result1 of
         _ | not (expect result1) -> return expectFailureError
         Just False -> do
           result2 <- q
           return $
             case ok result2 of
               _ | not (expect result2) -> expectFailureError
               Just True -> addCoverage result1 result2
               Just False ->
                 MkResult {
                   ok = Just False,
                   expect = True,
                   reason = sep (reason result1) (reason result2),
                   theException = theException result1 `mplus` theException result2,
                   -- The following few fields are not important because the
                   -- test case has failed anyway
                   abort = False,
                   maybeNumTests = Nothing,
                   maybeCheckCoverage = Nothing,
                   labels = [],
                   classes = [],
                   tables = [],
                   requiredCoverage = [],
                   callbacks =
                     callbacks result1 ++
                     [PostFinalFailure Counterexample $ \st _res -> putLine (terminal st) ""] ++
                     callbacks result2,
                   testCase =
                     testCase result1 ++
                     testCase result2 }
               Nothing -> result2
         -- The "obvious" semantics of .||. has:
         --   discard .||. true = true
         --   discard .||. discard = discard
         -- but this implementation gives discard .||. true = discard.
         -- This is reasonable because evaluating result2 in the case
         -- that result1 discards is just busy-work - it won't ever
         -- cause the property to fail. On the other hand, discarding
         -- instead of returning true causes us to execute one more
         -- test case - but assuming that preconditions are cheap to
         -- evaluate, this is no more work than evaluating result2
         -- would be, while (unlike evaluating result2) it might catch
         -- a bug.
         _ -> return result1

  expectFailureError = failed { reason = "expectFailure may not occur inside a disjunction" }
  sep [] s = s
  sep s [] = s
  sep s s' = s ++ ", " ++ s'

  addCoverage result r =
    r { requiredCoverage = requiredCoverage result ++ requiredCoverage r }

-- | Like '==', but prints a counterexample when it fails.
infix 4 ===
(===) :: (Eq a, Show a) => a -> a -> Property
x === y =
  counterexample (show x ++ interpret res ++ show y) res
  where
    res = x == y
    interpret True  = " == "
    interpret False = " /= "

-- | Like '/=', but prints a counterexample when it fails.
infix 4 =/=
(=/=) :: (Eq a, Show a) => a -> a -> Property
x =/= y =
  counterexample (show x ++ interpret res ++ show y) res
  where
    res = x /= y
    interpret True  = " /= "
    interpret False = " == "

#ifndef NO_DEEPSEQ
-- | Checks that a value is total, i.e., doesn't crash when evaluated.
total :: NFData a => a -> Property
total x = property (rnf x)
#endif

--------------------------------------------------------------------------
-- the end.