Amazonka.MediaLive.Types.M2tsSettings

Documentation

data M2tsSettings

M2ts Settings

See: newM2tsSettings smart constructor.

Constructors

M2tsSettings'

Fields

• absentInputAudioBehavior :: Maybe M2tsAbsentInputAudioBehavior

  When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.

• arib :: Maybe M2tsArib

  When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.

• aribCaptionsPid :: Maybe Text

  Packet Identifier (PID) for ARIB Captions in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• aribCaptionsPidControl :: Maybe M2tsAribCaptionsPidControl

  If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.

• audioBufferModel :: Maybe M2tsAudioBufferModel

  When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.

• audioFramesPerPes :: Maybe Natural

  The number of audio frames to insert for each PES packet.

• audioPids :: Maybe Text

  Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

• audioStreamType :: Maybe M2tsAudioStreamType

  When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.

• bitrate :: Maybe Natural

  The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.

• bufferModel :: Maybe M2tsBufferModel

  Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.

• ccDescriptor :: Maybe M2tsCcDescriptor

  When set to enabled, generates captionServiceDescriptor in PMT.

• dvbNitSettings :: Maybe DvbNitSettings

  Inserts DVB Network Information Table (NIT) at the specified table repetition interval.

• dvbSdtSettings :: Maybe DvbSdtSettings

  Inserts DVB Service Description Table (SDT) at the specified table repetition interval.

• dvbSubPids :: Maybe Text

  Packet Identifier (PID) for input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

• dvbTdtSettings :: Maybe DvbTdtSettings

  Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.

• dvbTeletextPid :: Maybe Text

  Packet Identifier (PID) for input source DVB Teletext data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• ebif :: Maybe M2tsEbifControl

  If set to passthrough, passes any EBIF data from the input source to this output.

• ebpAudioInterval :: Maybe M2tsAudioInterval

  When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.

• ebpLookaheadMs :: Maybe Natural

  When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.

• ebpPlacement :: Maybe M2tsEbpPlacement

  Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.

• ecmPid :: Maybe Text

  This field is unused and deprecated.

• esRateInPes :: Maybe M2tsEsRateInPes

  Include or exclude the ES Rate field in the PES header.

• etvPlatformPid :: Maybe Text

  Packet Identifier (PID) for input source ETV Platform data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• etvSignalPid :: Maybe Text

  Packet Identifier (PID) for input source ETV Signal data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• fragmentTime :: Maybe Double

  The length in seconds of each fragment. Only used with EBP markers.

• klv :: Maybe M2tsKlv

  If set to passthrough, passes any KLV data from the input source to this output.

• klvDataPids :: Maybe Text

  Packet Identifier (PID) for input source KLV data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

• nielsenId3Behavior :: Maybe M2tsNielsenId3Behavior

  If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

• nullPacketBitrate :: Maybe Double

  Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.

• patInterval :: Maybe Natural

  The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

• pcrControl :: Maybe M2tsPcrControl

  When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

• pcrPeriod :: Maybe Natural

  Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.

• pcrPid :: Maybe Text

  Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• pmtInterval :: Maybe Natural

  The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

• pmtPid :: Maybe Text

  Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• programNum :: Maybe Natural

  The value of the program number field in the Program Map Table.

• rateMode :: Maybe M2tsRateMode

  When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.

• scte27Pids :: Maybe Text

  Packet Identifier (PID) for input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

• scte35Control :: Maybe M2tsScte35Control

  Optionally pass SCTE-35 signals from the input source to this output.

• scte35Pid :: Maybe Text

  Packet Identifier (PID) of the SCTE-35 stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• segmentationMarkers :: Maybe M2tsSegmentationMarkers

  Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

• segmentationStyle :: Maybe M2tsSegmentationStyle

  The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.

• segmentationTime :: Maybe Double

  The length in seconds of each segment. Required unless markers is set to _none_.

• timedMetadataBehavior :: Maybe M2tsTimedMetadataBehavior

  When set to passthrough, timed metadata will be passed through from input to output.

• timedMetadataPid :: Maybe Text

  Packet Identifier (PID) of the timed metadata stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

• transportStreamId :: Maybe Natural

  The value of the transport stream ID field in the Program Map Table.

• videoPid :: Maybe Text

  Packet Identifier (PID) of the elementary video stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

Instances

FromJSON M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

parseJSON :: Value -> Parser M2tsSettings

parseJSONList :: Value -> Parser [M2tsSettings]

ToJSON M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

toJSON :: M2tsSettings -> Value

toEncoding :: M2tsSettings -> Encoding

toJSONList :: [M2tsSettings] -> Value

toEncodingList :: [M2tsSettings] -> Encoding

Generic M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Associated Types

type Rep M2tsSettings :: Type -> Type

Methods

from :: M2tsSettings -> Rep M2tsSettings x

to :: Rep M2tsSettings x -> M2tsSettings

Read M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

readsPrec :: Int -> ReadS M2tsSettings

readList :: ReadS [M2tsSettings]

readPrec :: ReadPrec M2tsSettings

readListPrec :: ReadPrec [M2tsSettings]

Show M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

showsPrec :: Int -> M2tsSettings -> ShowS

show :: M2tsSettings -> String

showList :: [M2tsSettings] -> ShowS

NFData M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

rnf :: M2tsSettings -> ()

Eq M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

(==) :: M2tsSettings -> M2tsSettings -> Bool

(/=) :: M2tsSettings -> M2tsSettings -> Bool

Hashable M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

Methods

hashWithSalt :: Int -> M2tsSettings -> Int

hash :: M2tsSettings -> Int

type Rep M2tsSettings

Defined in Amazonka.MediaLive.Types.M2tsSettings

type Rep M2tsSettings = D1 ('MetaData "M2tsSettings" "Amazonka.MediaLive.Types.M2tsSettings" "amazonka-medialive-2.0-FK9HUAz0OmeIH2i6eRdod0" 'False) (C1 ('MetaCons "M2tsSettings'" 'PrefixI 'True) (((((S1 ('MetaSel ('Just "absentInputAudioBehavior") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsAbsentInputAudioBehavior)) :*: S1 ('MetaSel ('Just "arib") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsArib))) :*: (S1 ('MetaSel ('Just "aribCaptionsPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "aribCaptionsPidControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsAribCaptionsPidControl)) :*: S1 ('MetaSel ('Just "audioBufferModel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsAudioBufferModel))))) :*: ((S1 ('MetaSel ('Just "audioFramesPerPes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "audioPids") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "audioStreamType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsAudioStreamType)))) :*: (S1 ('MetaSel ('Just "bitrate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "bufferModel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsBufferModel)) :*: S1 ('MetaSel ('Just "ccDescriptor") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsCcDescriptor)))))) :*: (((S1 ('MetaSel ('Just "dvbNitSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe DvbNitSettings)) :*: (S1 ('MetaSel ('Just "dvbSdtSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe DvbSdtSettings)) :*: S1 ('MetaSel ('Just "dvbSubPids") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "dvbTdtSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe DvbTdtSettings)) :*: (S1 ('MetaSel ('Just "dvbTeletextPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "ebif") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsEbifControl))))) :*: ((S1 ('MetaSel ('Just "ebpAudioInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsAudioInterval)) :*: (S1 ('MetaSel ('Just "ebpLookaheadMs") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "ebpPlacement") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsEbpPlacement)))) :*: (S1 ('MetaSel ('Just "ecmPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "esRateInPes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsEsRateInPes)) :*: S1 ('MetaSel ('Just "etvPlatformPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))))) :*: ((((S1 ('MetaSel ('Just "etvSignalPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "fragmentTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double)) :*: S1 ('MetaSel ('Just "klv") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsKlv)))) :*: (S1 ('MetaSel ('Just "klvDataPids") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "nielsenId3Behavior") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsNielsenId3Behavior)) :*: S1 ('MetaSel ('Just "nullPacketBitrate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double))))) :*: ((S1 ('MetaSel ('Just "patInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "pcrControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsPcrControl)) :*: S1 ('MetaSel ('Just "pcrPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)))) :*: (S1 ('MetaSel ('Just "pcrPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "pmtInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "pmtPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))) :*: (((S1 ('MetaSel ('Just "programNum") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "rateMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsRateMode)) :*: S1 ('MetaSel ('Just "scte27Pids") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "scte35Control") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsScte35Control)) :*: (S1 ('MetaSel ('Just "scte35Pid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "segmentationMarkers") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsSegmentationMarkers))))) :*: ((S1 ('MetaSel ('Just "segmentationStyle") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsSegmentationStyle)) :*: (S1 ('MetaSel ('Just "segmentationTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double)) :*: S1 ('MetaSel ('Just "timedMetadataBehavior") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe M2tsTimedMetadataBehavior)))) :*: (S1 ('MetaSel ('Just "timedMetadataPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "transportStreamId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "videoPid") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))))))

newM2tsSettings :: M2tsSettings

Create a value of M2tsSettings with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:absentInputAudioBehavior:M2tsSettings', m2tsSettings_absentInputAudioBehavior - When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.

$sel:arib:M2tsSettings', m2tsSettings_arib - When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.

$sel:aribCaptionsPid:M2tsSettings', m2tsSettings_aribCaptionsPid - Packet Identifier (PID) for ARIB Captions in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:aribCaptionsPidControl:M2tsSettings', m2tsSettings_aribCaptionsPidControl - If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.

$sel:audioBufferModel:M2tsSettings', m2tsSettings_audioBufferModel - When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.

$sel:audioFramesPerPes:M2tsSettings', m2tsSettings_audioFramesPerPes - The number of audio frames to insert for each PES packet.

$sel:audioPids:M2tsSettings', m2tsSettings_audioPids - Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

$sel:audioStreamType:M2tsSettings', m2tsSettings_audioStreamType - When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.

$sel:bitrate:M2tsSettings', m2tsSettings_bitrate - The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.

$sel:bufferModel:M2tsSettings', m2tsSettings_bufferModel - Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.

$sel:ccDescriptor:M2tsSettings', m2tsSettings_ccDescriptor - When set to enabled, generates captionServiceDescriptor in PMT.

$sel:dvbNitSettings:M2tsSettings', m2tsSettings_dvbNitSettings - Inserts DVB Network Information Table (NIT) at the specified table repetition interval.

$sel:dvbSdtSettings:M2tsSettings', m2tsSettings_dvbSdtSettings - Inserts DVB Service Description Table (SDT) at the specified table repetition interval.

$sel:dvbSubPids:M2tsSettings', m2tsSettings_dvbSubPids - Packet Identifier (PID) for input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

$sel:dvbTdtSettings:M2tsSettings', m2tsSettings_dvbTdtSettings - Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.

$sel:dvbTeletextPid:M2tsSettings', m2tsSettings_dvbTeletextPid - Packet Identifier (PID) for input source DVB Teletext data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:ebif:M2tsSettings', m2tsSettings_ebif - If set to passthrough, passes any EBIF data from the input source to this output.

$sel:ebpAudioInterval:M2tsSettings', m2tsSettings_ebpAudioInterval - When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.

$sel:ebpLookaheadMs:M2tsSettings', m2tsSettings_ebpLookaheadMs - When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.

$sel:ebpPlacement:M2tsSettings', m2tsSettings_ebpPlacement - Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.

$sel:ecmPid:M2tsSettings', m2tsSettings_ecmPid - This field is unused and deprecated.

$sel:esRateInPes:M2tsSettings', m2tsSettings_esRateInPes - Include or exclude the ES Rate field in the PES header.

$sel:etvPlatformPid:M2tsSettings', m2tsSettings_etvPlatformPid - Packet Identifier (PID) for input source ETV Platform data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:etvSignalPid:M2tsSettings', m2tsSettings_etvSignalPid - Packet Identifier (PID) for input source ETV Signal data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:fragmentTime:M2tsSettings', m2tsSettings_fragmentTime - The length in seconds of each fragment. Only used with EBP markers.

$sel:klv:M2tsSettings', m2tsSettings_klv - If set to passthrough, passes any KLV data from the input source to this output.

$sel:klvDataPids:M2tsSettings', m2tsSettings_klvDataPids - Packet Identifier (PID) for input source KLV data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

$sel:nielsenId3Behavior:M2tsSettings', m2tsSettings_nielsenId3Behavior - If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

$sel:nullPacketBitrate:M2tsSettings', m2tsSettings_nullPacketBitrate - Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.

$sel:patInterval:M2tsSettings', m2tsSettings_patInterval - The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

$sel:pcrControl:M2tsSettings', m2tsSettings_pcrControl - When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

$sel:pcrPeriod:M2tsSettings', m2tsSettings_pcrPeriod - Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.

$sel:pcrPid:M2tsSettings', m2tsSettings_pcrPid - Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:pmtInterval:M2tsSettings', m2tsSettings_pmtInterval - The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

$sel:pmtPid:M2tsSettings', m2tsSettings_pmtPid - Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:programNum:M2tsSettings', m2tsSettings_programNum - The value of the program number field in the Program Map Table.

$sel:rateMode:M2tsSettings', m2tsSettings_rateMode - When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.

$sel:scte27Pids:M2tsSettings', m2tsSettings_scte27Pids - Packet Identifier (PID) for input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

$sel:scte35Control:M2tsSettings', m2tsSettings_scte35Control - Optionally pass SCTE-35 signals from the input source to this output.

$sel:scte35Pid:M2tsSettings', m2tsSettings_scte35Pid - Packet Identifier (PID) of the SCTE-35 stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:segmentationMarkers:M2tsSettings', m2tsSettings_segmentationMarkers - Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

$sel:segmentationStyle:M2tsSettings', m2tsSettings_segmentationStyle - The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.

$sel:segmentationTime:M2tsSettings', m2tsSettings_segmentationTime - The length in seconds of each segment. Required unless markers is set to _none_.

$sel:timedMetadataBehavior:M2tsSettings', m2tsSettings_timedMetadataBehavior - When set to passthrough, timed metadata will be passed through from input to output.

$sel:timedMetadataPid:M2tsSettings', m2tsSettings_timedMetadataPid - Packet Identifier (PID) of the timed metadata stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

$sel:transportStreamId:M2tsSettings', m2tsSettings_transportStreamId - The value of the transport stream ID field in the Program Map Table.

$sel:videoPid:M2tsSettings', m2tsSettings_videoPid - Packet Identifier (PID) of the elementary video stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_absentInputAudioBehavior :: Lens' M2tsSettings (Maybe M2tsAbsentInputAudioBehavior)

When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.

m2tsSettings_arib :: Lens' M2tsSettings (Maybe M2tsArib)

When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.

m2tsSettings_aribCaptionsPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for ARIB Captions in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_aribCaptionsPidControl :: Lens' M2tsSettings (Maybe M2tsAribCaptionsPidControl)

If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.

m2tsSettings_audioBufferModel :: Lens' M2tsSettings (Maybe M2tsAudioBufferModel)

When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.

m2tsSettings_audioFramesPerPes :: Lens' M2tsSettings (Maybe Natural)

The number of audio frames to insert for each PES packet.

m2tsSettings_audioPids :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_audioStreamType :: Lens' M2tsSettings (Maybe M2tsAudioStreamType)

When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.

m2tsSettings_bitrate :: Lens' M2tsSettings (Maybe Natural)

The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.

m2tsSettings_bufferModel :: Lens' M2tsSettings (Maybe M2tsBufferModel)

Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.

m2tsSettings_ccDescriptor :: Lens' M2tsSettings (Maybe M2tsCcDescriptor)

When set to enabled, generates captionServiceDescriptor in PMT.

m2tsSettings_dvbNitSettings :: Lens' M2tsSettings (Maybe DvbNitSettings)

Inserts DVB Network Information Table (NIT) at the specified table repetition interval.

m2tsSettings_dvbSdtSettings :: Lens' M2tsSettings (Maybe DvbSdtSettings)

Inserts DVB Service Description Table (SDT) at the specified table repetition interval.

m2tsSettings_dvbSubPids :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_dvbTdtSettings :: Lens' M2tsSettings (Maybe DvbTdtSettings)

Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.

m2tsSettings_dvbTeletextPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source DVB Teletext data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_ebif :: Lens' M2tsSettings (Maybe M2tsEbifControl)

If set to passthrough, passes any EBIF data from the input source to this output.

m2tsSettings_ebpAudioInterval :: Lens' M2tsSettings (Maybe M2tsAudioInterval)

When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.

m2tsSettings_ebpLookaheadMs :: Lens' M2tsSettings (Maybe Natural)

When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.

m2tsSettings_ebpPlacement :: Lens' M2tsSettings (Maybe M2tsEbpPlacement)

Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.

m2tsSettings_ecmPid :: Lens' M2tsSettings (Maybe Text)

This field is unused and deprecated.

m2tsSettings_esRateInPes :: Lens' M2tsSettings (Maybe M2tsEsRateInPes)

Include or exclude the ES Rate field in the PES header.

m2tsSettings_etvPlatformPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source ETV Platform data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_etvSignalPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source ETV Signal data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_fragmentTime :: Lens' M2tsSettings (Maybe Double)

The length in seconds of each fragment. Only used with EBP markers.

m2tsSettings_klv :: Lens' M2tsSettings (Maybe M2tsKlv)

If set to passthrough, passes any KLV data from the input source to this output.

m2tsSettings_klvDataPids :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source KLV data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_nielsenId3Behavior :: Lens' M2tsSettings (Maybe M2tsNielsenId3Behavior)

If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

m2tsSettings_nullPacketBitrate :: Lens' M2tsSettings (Maybe Double)

Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.

m2tsSettings_patInterval :: Lens' M2tsSettings (Maybe Natural)

The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

m2tsSettings_pcrControl :: Lens' M2tsSettings (Maybe M2tsPcrControl)

When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

m2tsSettings_pcrPeriod :: Lens' M2tsSettings (Maybe Natural)

Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.

m2tsSettings_pcrPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_pmtInterval :: Lens' M2tsSettings (Maybe Natural)

The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.

m2tsSettings_pmtPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_programNum :: Lens' M2tsSettings (Maybe Natural)

The value of the program number field in the Program Map Table.

m2tsSettings_rateMode :: Lens' M2tsSettings (Maybe M2tsRateMode)

When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.

m2tsSettings_scte27Pids :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) for input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_scte35Control :: Lens' M2tsSettings (Maybe M2tsScte35Control)

Optionally pass SCTE-35 signals from the input source to this output.

m2tsSettings_scte35Pid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) of the SCTE-35 stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_segmentationMarkers :: Lens' M2tsSettings (Maybe M2tsSegmentationMarkers)

Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

m2tsSettings_segmentationStyle :: Lens' M2tsSettings (Maybe M2tsSegmentationStyle)

The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.

m2tsSettings_segmentationTime :: Lens' M2tsSettings (Maybe Double)

The length in seconds of each segment. Required unless markers is set to _none_.

m2tsSettings_timedMetadataBehavior :: Lens' M2tsSettings (Maybe M2tsTimedMetadataBehavior)

When set to passthrough, timed metadata will be passed through from input to output.

m2tsSettings_timedMetadataPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) of the timed metadata stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).

m2tsSettings_transportStreamId :: Lens' M2tsSettings (Maybe Natural)

The value of the transport stream ID field in the Program Map Table.

m2tsSettings_videoPid :: Lens' M2tsSettings (Maybe Text)

Packet Identifier (PID) of the elementary video stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).