Control.Auto.Time

This module contains various Auto transformers for manipulating the flow of time/stepping rate of an Auto.

Many of these are Auto "transformers", meaning that they take in an Auto and return a transformed Auto, with new stepping behavior.

For example, there is accelerate:

accelerate :: Monad m => Int -> Auto m a b -> Auto m a [b]

accelerate n turns an Auto into an Auto that "steps itself" n times for every single input/step. The result is a list of the results of each single step.

There are also various Autos for observing the passage of time (count) and actiong as a "delay" or a way to access the previously stepped values of an Auto.

A counter

count :: (Serialize b, Num b) => Auto m a b

A simple Auto that ignores all input; its output stream counts upwards from zero.

>>> take 10 . streamAuto' count $ repeat ()
[0,1,2,3,4,5,6,7,8,9]

count_ :: Num b => Auto m a b

A non-resuming/non-serializing version of count.

Manipulating time

Delaying

lastVal

Arguments

:: Serialize a

=> a

initial value

-> Auto m a a

An Auto that returns the last value received by it. Given an "initial value" to output first.

From the signal processing world, this is known as the "lag operator" L.

This is (potentially) a very dangerous Auto, because its usage and its very existence opens the door to breaking denotative/declarative style and devolving into imperative style coding. However, when used where it is supposed to be used, it is more or less invaluable, and will be an essential part of many programs.

Its main usage is for dealing with recursive bindings. If you ever are laying out recursive bindings in a high-level/denotative way, you need to have at least one value be able to have a "initial output" without depending on anything else. lastVal and delay allow you to do this.

See the recursive example for more information on the appropriate usage of lastVal and delay.

>>> streamAuto' (lastVal 100) [1..10]
[100,1,2,3,4,5,6,7,8,9]

lastVal_

Arguments

:: a

initial value

-> Auto m a a

The non-resuming/non-serializing version of lastVal.

arrD

Arguments

:: Serialize b

=> (a -> b)

function to apply

-> b

initial value

-> Auto m a b

Like arr, but applies the function to the previous value of the input, instead of the current value. Used for the same purposes as lastVal: to manage recursive bindings.

Warning: Don't use this to do imperative programming!

arrD id == lastVal

>>> streamAuto' (arrD negate 100) [1..10]
[100,-1,-2,-3,-4,-5,-6,-7,-8,-9]

arrD_

Arguments

:: Serialize b

=> (a -> b)

function to apply

-> b

initial value

-> Auto m a b

The non-resuming/non-serializing version of arrD.

delay

Arguments

:: Serialize a

=> a

initial value

-> Auto m a a

An alias for lastVal; used in contexts where "delay" is more a meaningful description than "last value". All of the warnings for lastVal still apply, so you should probably read it if you haven't :)

delay_

Arguments

:: a

initial value

-> Auto m a a

The non-resuming/non-serializing version of delay.

delayList

Arguments

:: (Serialize a, Monad m)

=> [a]

items to delay with (initial values)

-> Auto m a a

Like delay, except has as many "initial values" as the input list. Outputs every item in the input list in order before returning the first received value.

delayList [y0] = delay y0

>>> streamAuto' (delayList [3,5,7,11]) [1..10]
[3,5,7,11,1,2,3,4,5,6]

delayList_

Arguments

:: Monad m

=> [a]

items to delay with (initial values)

-> Auto m a a

The non-resuming/non-serializing version of delayList.

delayN

Arguments

:: (Serialize a, Monad m)

=> Int

number of steps to delay

-> a

initial value(s)

-> Auto m a a

Like delay, except delays the desired number of steps with the same initial output value.

delayN n x0 = delayList (replicate n x0)

delayN 1 x0 = delay x0

>>> streamAuto' (delayN 3 0) [1..10]
[0,0,0,1,2,3,4,5,6,7]

delayN_

Arguments

:: Monad m

=> Int

number of steps to delay

-> a

initial value(s)

-> Auto m a a

The non-resuming/non-serializing version of delayN

Priming

priming

Arguments

:: Monad m

=> [a]

inputs to prime with

-> Auto m a b

Auto to prime

-> Auto m a b

When first asked for output, "primes" the Auto first by streaming it with all of the given inputs first before processing the first input. Aterwards, behaves like normal.

>>> streamAuto' (priming [1,2,3] (sumFrom 0)) [1..10]
[7,9,12,16,21,27,34,42,51,61]

The Auto behaves as if it had already "processed" the [1,2,3], resulting in an accumulator of 6, before it starts taking in any input.

Normally this would be silly with an Auto', because the above is the same as:

>>> let (_, a) = overList' (sumFrom 0) [1,2,3]
>>> streamAuto' a [1..10]
[7,9,12,16,21,27,34,42,51,61]

This becomes somewhat more useful when you have "monadic" Autos, and want to defer the execution until during normal stepping:

>>> _ <- streamAuto (priming [1,2,3] (arrM print)) [10,11,12]
1    -- IO effects
2
3
10
11
12

Stretching

stretch

Arguments

:: (Serialize b, Monad m)

=> Int

stretching factor

-> Auto m a b

Auto to stretch

-> Auto m a b

"stretch" an Auto out, slowing time. stretch n a will take one input, repeat the same output n times (ignoring input), and then take another. It ignores all inputs in between.

>>> let a = stretch 2 (sumFrom 0)
>>> streamAuto' a [1,8,5,4,3,7,2,0]
   [1,1,6,6,9,9,11,11]
-- [1,_,5,_,3,_,2 ,_ ] <-- the inputs

stretch_

Arguments

:: Monad m

=> Int

stretching factor

-> Auto m a b

Auto to stretch

-> Auto m a b

The non-resuming/non-serializing version of stretch.

stretchB

Arguments

:: Monad m

=> Int

stretching factor

-> Auto m a b

Auto to stretch

-> Auto m a (Blip b)

Like stretch, but instead of holding the the "stretched" outputs, outputs a blip stream that emits every time the stretched Auto "progresses" (every n ticks)

See stretch for more information.

>>> let a = stretchB 2 (accum (+) 0)
>>> streamAuto' a [1,8,5,4,3,7,2,0]
[Blip 1, NoBlip, Blip 6, NoBlip, Blip 9, NoBlip, Blip 11, NoBlip]

Accelerating

accelerate

Arguments

:: Monad m

=> Int

acceleration factor

-> Auto m a b

Auto to accelerate

-> Auto m a [b]

accelerate n a turns an Auto a into an "accelerated" Auto, where every input is fed into the Auto n times. All of the results are collected in the output.

The same input is fed repeatedly n times.

>>> streamAuto' (accelerate 3 (sumFrom 0)) [2,3,4]
[[2,4,6],[9,12,15],[19,23,27]]
-- ^adding 2s  ^adding 3s ^adding 4s

accelerateWith

Arguments

:: Monad m

=> a

default input value, during acceleration periods

-> Int

acceleration factor

-> Auto m a b

Auto to accelerate

-> Auto m a [b]

accelerateWith xd n a is like accelerate n a, except instead of feeding in the input n times, it feeds the input in once and repeats the "filler" xd for the rest of the accelerating period.

>>> streamAuto' (accelerateWith (-1) 3 (sumFrom 0)) [1,10,100]
[[1,0,-1],[9,8,7],[107,106,105]]
-- ^ feed in 1 once and -1 twice
--          ^ feed in 10 once and -1 twice
--                  ^ feed in 100 once and -1 twice

accelOverList

Arguments

:: Monad m

=> Auto m a b

Auto to accelerate

-> Auto m [a] [b]

Accelerates the Auto, so instead of taking an a and returning a b, it takes a list of a, "streams" the Auto over each one, and returns a list of b results.

For example, if you normally feed sumFrom 0 a 1, then a 2, then a 3, you'd get a 1, then a 3, then a 6. But if you feed accelOverList (sumFrom 0) a [1,2], you'd get a [1,3], and if you fed it a [3] after, you'd get a [6].

Turns a [a] -> [b] into an [[a]] -> [[b]]; if you "chunk up" the input stream as into chunks of input to feed all at once, the outputs b will be chunked up the same way.

>>> streamAuto' (sumFrom 0) [1,2,3,4,5,6,7,8]
[1,3,6,10,15,21,28,36]
>>> streamAuto' (accelOverList (sumFrom 0)) [[1,2],[],[3,4,5],[6],[7,8]]
[[1,3],[],[6,10,15],[21],[28,36]]

Mostly useful if you want to feed an Auto multiple inputs in the same step. Note that if you always feed in singleton lists (lists with one item), you'll more or less get the same behavior as normal.

Skipping

skipTo

Arguments

:: Monad m

=> a

default input value, during skipping periods

-> Auto m a (b, Blip c)

Auto to skip over, until each time the blip stream emits

-> Auto m a ([b], c)

Takes an Auto that produces (b, Blip c), and turns it into an Auto that produces ([b], c).

Basically, the new Auto "squishes together" the periods of output between each time the blip stream emits. All outputs between each emitted value are accumulated and returned in the resulting [b].

It "does this" in the same manner as accelerateWith and fastForward: first feed the input, then step repeatedly with the default input value.

>>> let a :: Auto' Int (Int, Blip String)
        a = proc i -> do
                sums <- sumFrom 0 -< i
                blp  <- every 3   -< i     -- emits every 3 ticks.
                id    -< (sums, sums <& blp) -- replace emitted value
                                             -- with the running sum
>>> let skipA :: Auto' Int ([Int], String)
        skipA = skipTo (-1) a
>>> let (res1, skipA') = stepAuto' skipA 8
>>> res1
([8,7,6], 6)     -- fed 8 first, then (-1) repeatedly
>>> let (res2, _     ) = evalAuto skipA' 5
>>> res2
([11,10,9], 9)   -- fed 5 first, then (-1) repeatedly

If the blip stream never emits then stepping this and getting the result or the next/updated Auto never terminates...so watch out!

fastForward

Arguments

:: Monad m

=> a

default input

-> Interval m a b

Interval to fastforward (past each "off" period, or Nothing)

-> Auto m a b

Turns an Interval m a b into an Auto m a b --- that is, an Auto m a (Maybe b) into an Auto m a b.

It does this by "skipping over" all "off"/Nothing input. When the result "should" be a Nothing, it re-runs the Interval over and over again with the given default input until the Auto turns back "on" again (outputs a Just).

If the Interval reaches a point where it will never be "on" again, stepping this and getting the result or the next/updated Auto won't terminate...so watch out!

>>> let a1 = offFor 3 . sumFrom 0
>>> streamAuto' a1 [1..10]
[Nothing, Nothing, Nothing, Just 10, Just 15, Just 21]
>>> streamAuto' (fastForward 0 a1) [1..6]
[1,3,6,10,15,21]
>>> streamAuto' (fastForward (-10) a1) [1..6]
[-29,-27,-24,-20,-15,-9]

In that last example, the first input is 1, then it inputs (-10) until it is "on"/Just again (on the fourth step). Then continues imputing 2, 3, 4 etc.

fastForwardEither

Arguments

:: Monad m

=> a

default input

-> Auto m a (Either c b)

Auto to fast-forward (past each Left)

-> Auto m a (b, [c])

Same behavior as fastForward, except accumulates all of the Left c outputs in a list.