GHC.IO.Handle

External API for GHC's Handle implementation

Documentation

data Handle

Haskell defines operations to read and write characters from and to files, represented by values of type Handle. Each value of this type is a handle: a record used by the Haskell run-time system to manage I/O with file system objects. A handle has at least the following properties:

• whether it manages input or output or both;
• whether it is open, closed or semi-closed;
• whether the object is seekable;
• whether buffering is disabled, or enabled on a line or block basis;
• a buffer (whose length may be zero).

Most handles will also have a current I/O position indicating where the next input or output operation will occur. A handle is readable if it manages only input or both input and output; likewise, it is writable if it manages only output or both input and output. A handle is open when first allocated. Once it is closed it can no longer be used for either input or output, though an implementation cannot re-use its storage while references remain to it. Handles are in the Show and Eq classes. The string produced by showing a handle is system dependent; it should include enough information to identify the handle for debugging. A handle is equal according to == only to itself; no attempt is made to compare the internal state of different handles for equality.

Instances

Show Handle

Since: base-4.1.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

showsPrec :: Int -> Handle -> ShowS

show :: Handle -> String

showList :: [Handle] -> ShowS

Eq Handle

Since: base-4.1.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

(==) :: Handle -> Handle -> Bool

(/=) :: Handle -> Handle -> Bool

data BufferMode

Three kinds of buffering are supported: line-buffering, block-buffering or no-buffering. These modes have the following effects. For output, items are written out, or flushed, from the internal buffer according to the buffer mode:

• line-buffering: the entire output buffer is flushed whenever a newline is output, the buffer overflows, a hFlush is issued, or the handle is closed.
• block-buffering: the entire buffer is written out whenever it overflows, a hFlush is issued, or the handle is closed.
• no-buffering: output is written immediately, and never stored in the buffer.

An implementation is free to flush the buffer more frequently, but not less frequently, than specified above. The output buffer is emptied as soon as it has been written out.

Similarly, input occurs according to the buffer mode for the handle:

• line-buffering: when the buffer for the handle is not empty, the next item is obtained from the buffer; otherwise, when the buffer is empty, characters up to and including the next newline character are read into the buffer. No characters are available until the newline character is available or the buffer is full.
• block-buffering: when the buffer for the handle becomes empty, the next block of data is read into the buffer.
• no-buffering: the next input item is read and returned. The hLookAhead operation implies that even a no-buffered handle may require a one-character buffer.

The default buffering mode when a handle is opened is implementation-dependent and may depend on the file system object which is attached to that handle. For most implementations, physical files will normally be block-buffered and terminals will normally be line-buffered.

Constructors

NoBuffering

buffering is disabled if possible.

LineBuffering

line-buffering should be enabled if possible.

BlockBuffering (Maybe Int)

block-buffering should be enabled if possible. The size of the buffer is n items if the argument is Just n and is otherwise implementation-dependent.

Instances

Read BufferMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

readsPrec :: Int -> ReadS BufferMode

readList :: ReadS [BufferMode]

readPrec :: ReadPrec BufferMode

readListPrec :: ReadPrec [BufferMode]

Show BufferMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

showsPrec :: Int -> BufferMode -> ShowS

show :: BufferMode -> String

showList :: [BufferMode] -> ShowS

Eq BufferMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

(==) :: BufferMode -> BufferMode -> Bool

(/=) :: BufferMode -> BufferMode -> Bool

Ord BufferMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

compare :: BufferMode -> BufferMode -> Ordering

(<) :: BufferMode -> BufferMode -> Bool

(<=) :: BufferMode -> BufferMode -> Bool

(>) :: BufferMode -> BufferMode -> Bool

(>=) :: BufferMode -> BufferMode -> Bool

max :: BufferMode -> BufferMode -> BufferMode

min :: BufferMode -> BufferMode -> BufferMode

mkFileHandle

Arguments

:: (RawIO dev, IODevice dev, BufferedIO dev, Typeable dev)

=> dev

the underlying IO device, which must support IODevice, BufferedIO and Typeable

-> FilePath

a string describing the Handle, e.g. the file path for a file. Used in error messages.

-> IOMode

-> Maybe TextEncoding

-> NewlineMode

-> IO Handle

makes a new Handle

mkDuplexHandle :: (RawIO dev, IODevice dev, BufferedIO dev, Typeable dev) => dev -> FilePath -> Maybe TextEncoding -> NewlineMode -> IO Handle

like mkFileHandle, except that a Handle is created with two independent buffers, one for reading and one for writing. Used for full-duplex streams, such as network sockets.

hFileSize :: Handle -> IO Integer

For a handle hdl which attached to a physical file, hFileSize hdl returns the size of that file in 8-bit bytes.

hSetFileSize :: Handle -> Integer -> IO ()

hSetFileSize hdl size truncates the physical file with handle hdl to size bytes.

hIsEOF :: Handle -> IO Bool

For a readable handle hdl, hIsEOF hdl returns True if no further input can be taken from hdl or for a physical file, if the current I/O position is equal to the length of the file. Otherwise, it returns False.

NOTE: hIsEOF may block, because it has to attempt to read from the stream to determine whether there is any more data to be read.

isEOF :: IO Bool

The computation isEOF is identical to hIsEOF, except that it works only on stdin.

hLookAhead :: Handle -> IO Char

Computation hLookAhead returns the next character from the handle without removing it from the input buffer, blocking until a character is available.

This operation may fail with:

• isEOFError if the end of file has been reached.

hSetBuffering :: Handle -> BufferMode -> IO ()

Computation hSetBuffering hdl mode sets the mode of buffering for handle hdl on subsequent reads and writes.

If the buffer mode is changed from BlockBuffering or LineBuffering to NoBuffering, then

• if hdl is writable, the buffer is flushed as for hFlush;
• if hdl is not writable, the contents of the buffer are discarded.

This operation may fail with:

• isPermissionError if the handle has already been used for reading or writing and the implementation does not allow the buffering mode to be changed.

hSetBinaryMode :: Handle -> Bool -> IO ()

Select binary mode (True) or text mode (False) on a open handle. (See also openBinaryFile.)

This has the same effect as calling hSetEncoding with char8, together with hSetNewlineMode with noNewlineTranslation.

hSetEncoding :: Handle -> TextEncoding -> IO ()

The action hSetEncoding hdl encoding changes the text encoding for the handle hdl to encoding. The default encoding when a Handle is created is localeEncoding, namely the default encoding for the current locale.

To create a Handle with no encoding at all, use openBinaryFile. To stop further encoding or decoding on an existing Handle, use hSetBinaryMode.

hSetEncoding may need to flush buffered data in order to change the encoding.

hGetEncoding :: Handle -> IO (Maybe TextEncoding)

Return the current TextEncoding for the specified Handle, or Nothing if the Handle is in binary mode.

Note that the TextEncoding remembers nothing about the state of the encoder/decoder in use on this Handle. For example, if the encoding in use is UTF-16, then using hGetEncoding and hSetEncoding to save and restore the encoding may result in an extra byte-order-mark being written to the file.

hFlush :: Handle -> IO ()

The action hFlush hdl causes any items buffered for output in handle hdl to be sent immediately to the operating system.

This operation may fail with:

• isFullError if the device is full;
• isPermissionError if a system resource limit would be exceeded. It is unspecified whether the characters in the buffer are discarded or retained under these circumstances.

hFlushAll :: Handle -> IO ()

The action hFlushAll hdl flushes all buffered data in hdl, including any buffered read data. Buffered read data is flushed by seeking the file position back to the point before the buffered data was read, and hence only works if hdl is seekable (see hIsSeekable).

This operation may fail with:

• isFullError if the device is full;
• isPermissionError if a system resource limit would be exceeded. It is unspecified whether the characters in the buffer are discarded or retained under these circumstances;
• isIllegalOperation if hdl has buffered read data, and is not seekable.

hDuplicate :: Handle -> IO Handle

Returns a duplicate of the original handle, with its own buffer. The two Handles will share a file pointer, however. The original handle's buffer is flushed, including discarding any input data, before the handle is duplicated.

hDuplicateTo :: Handle -> Handle -> IO ()

Makes the second handle a duplicate of the first handle. The second handle will be closed first, if it is not already.

This can be used to retarget the standard Handles, for example:

do h <- openFile "mystdout" WriteMode
   hDuplicateTo h stdout

hClose :: Handle -> IO ()

Computation hClose hdl makes handle hdl closed. Before the computation finishes, if hdl is writable its buffer is flushed as for hFlush. Performing hClose on a handle that has already been closed has no effect; doing so is not an error. All other operations on a closed handle will fail. If hClose fails for any reason, any further operations (apart from hClose) on the handle will still fail as if hdl had been successfully closed.

hClose is an interruptible operation in the sense described in Control.Exception. If hClose is interrupted by an asynchronous exception in the process of flushing its buffers, then the I/O device (e.g., file) will be closed anyway.

hClose_help :: Handle__ -> IO (Handle__, Maybe SomeException)

data LockMode

Indicates a mode in which a file should be locked.

Constructors

SharedLock

ExclusiveLock

hLock :: Handle -> LockMode -> IO ()

If a Handle references a file descriptor, attempt to lock contents of the underlying file in appropriate mode. If the file is already locked in incompatible mode, this function blocks until the lock is established. The lock is automatically released upon closing a Handle.

Things to be aware of:

1) This function may block inside a C call. If it does, in order to be able to interrupt it with asynchronous exceptions and/or for other threads to continue working, you MUST use threaded version of the runtime system.

2) The implementation uses LockFileEx on Windows and flock otherwise, hence all of their caveats also apply here.

3) On non-Windows platforms that don't support flock (e.g. Solaris) this function throws FileLockingNotImplemented. We deliberately choose to not provide fcntl based locking instead because of its broken semantics.

Since: base-4.10.0.0

hTryLock :: Handle -> LockMode -> IO Bool

Non-blocking version of hLock.

Returns True if taking the lock was successful and False otherwise.

Since: base-4.10.0.0

type HandlePosition = Integer

data HandlePosn

Constructors

HandlePosn Handle HandlePosition

Instances

Show HandlePosn

Since: base-4.1.0.0

Defined in GHC.Internal.IO.Handle

Methods

showsPrec :: Int -> HandlePosn -> ShowS

show :: HandlePosn -> String

showList :: [HandlePosn] -> ShowS

Eq HandlePosn

Since: base-4.1.0.0

Defined in GHC.Internal.IO.Handle

Methods

(==) :: HandlePosn -> HandlePosn -> Bool

(/=) :: HandlePosn -> HandlePosn -> Bool

hGetPosn :: Handle -> IO HandlePosn

Computation hGetPosn hdl returns the current I/O position of hdl as a value of the abstract type HandlePosn.

hSetPosn :: HandlePosn -> IO ()

If a call to hGetPosn hdl returns a position p, then computation hSetPosn p sets the position of hdl to the position it held at the time of the call to hGetPosn.

This operation may fail with:

• isPermissionError if a system resource limit would be exceeded.

data SeekMode

A mode that determines the effect of hSeek hdl mode i.

Constructors

AbsoluteSeek

the position of hdl is set to i.

RelativeSeek

the position of hdl is set to offset i from the current position.

SeekFromEnd

the position of hdl is set to offset i from the end of the file.

Instances

Enum SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

succ :: SeekMode -> SeekMode

pred :: SeekMode -> SeekMode

toEnum :: Int -> SeekMode

fromEnum :: SeekMode -> Int

enumFrom :: SeekMode -> [SeekMode]

enumFromThen :: SeekMode -> SeekMode -> [SeekMode]

enumFromTo :: SeekMode -> SeekMode -> [SeekMode]

enumFromThenTo :: SeekMode -> SeekMode -> SeekMode -> [SeekMode]

Ix SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

range :: (SeekMode, SeekMode) -> [SeekMode]

index :: (SeekMode, SeekMode) -> SeekMode -> Int

unsafeIndex :: (SeekMode, SeekMode) -> SeekMode -> Int

inRange :: (SeekMode, SeekMode) -> SeekMode -> Bool

rangeSize :: (SeekMode, SeekMode) -> Int

unsafeRangeSize :: (SeekMode, SeekMode) -> Int

Read SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

readsPrec :: Int -> ReadS SeekMode

readList :: ReadS [SeekMode]

readPrec :: ReadPrec SeekMode

readListPrec :: ReadPrec [SeekMode]

Show SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

showsPrec :: Int -> SeekMode -> ShowS

show :: SeekMode -> String

showList :: [SeekMode] -> ShowS

Eq SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

(==) :: SeekMode -> SeekMode -> Bool

(/=) :: SeekMode -> SeekMode -> Bool

Ord SeekMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Device

Methods

compare :: SeekMode -> SeekMode -> Ordering

(<) :: SeekMode -> SeekMode -> Bool

(<=) :: SeekMode -> SeekMode -> Bool

(>) :: SeekMode -> SeekMode -> Bool

(>=) :: SeekMode -> SeekMode -> Bool

max :: SeekMode -> SeekMode -> SeekMode

min :: SeekMode -> SeekMode -> SeekMode

hSeek :: Handle -> SeekMode -> Integer -> IO ()

Computation hSeek hdl mode i sets the position of handle hdl depending on mode. The offset i is given in terms of 8-bit bytes.

If hdl is block- or line-buffered, then seeking to a position which is not in the current buffer will first cause any items in the output buffer to be written to the device, and then cause the input buffer to be discarded. Some handles may not be seekable (see hIsSeekable), or only support a subset of the possible positioning operations (for instance, it may only be possible to seek to the end of a tape, or to a positive offset from the beginning or current position). It is not possible to set a negative I/O position, or for a physical file, an I/O position beyond the current end-of-file.

This operation may fail with:

• isIllegalOperationError if the Handle is not seekable, or does not support the requested seek mode.
• isPermissionError if a system resource limit would be exceeded.

hTell :: Handle -> IO Integer

Computation hTell hdl returns the current position of the handle hdl, as the number of bytes from the beginning of the file. The value returned may be subsequently passed to hSeek to reposition the handle to the current position.

This operation may fail with:

• isIllegalOperationError if the Handle is not seekable.

hIsOpen :: Handle -> IO Bool

hIsOpen hdl returns whether the handle is open. If the haType of hdl is ClosedHandle or SemiClosedHandle this returns False and True otherwise.

hIsClosed :: Handle -> IO Bool

hIsOpen hdl returns whether the handle is closed. If the haType of hdl is ClosedHandle this returns True and False otherwise.

hIsReadable :: Handle -> IO Bool

hIsReadable hdl returns whether it is possible to read from the handle.

hIsWritable :: Handle -> IO Bool

hIsWritable hdl returns whether it is possible to write to the handle.

hGetBuffering :: Handle -> IO BufferMode

Computation hGetBuffering hdl returns the current buffering mode for hdl.

hIsSeekable :: Handle -> IO Bool

hIsSeekable hdl returns whether it is possible to hSeek with the given handle.

hSetEcho :: Handle -> Bool -> IO ()

Set the echoing status of a handle connected to a terminal.

hGetEcho :: Handle -> IO Bool

Get the echoing status of a handle connected to a terminal.

hIsTerminalDevice :: Handle -> IO Bool

Is the handle connected to a terminal?

On Windows the result of hIsTerminalDevide might be misleading, because non-native terminals, such as MinTTY used in MSYS and Cygwin environments, are implemented via redirection. Use System.Win32.Types.withHandleToHANDLE System.Win32.MinTTY.isMinTTYHandle to recognise it. Also consider ansi-terminal package for crossplatform terminal support.

hSetNewlineMode :: Handle -> NewlineMode -> IO ()

Set the NewlineMode on the specified Handle. All buffered data is flushed first.

data Newline

The representation of a newline in the external file or stream.

Constructors

LF

'\n'

CRLF

'\r\n'

Instances

Read Newline

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

readsPrec :: Int -> ReadS Newline

readList :: ReadS [Newline]

readPrec :: ReadPrec Newline

readListPrec :: ReadPrec [Newline]

Show Newline

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

showsPrec :: Int -> Newline -> ShowS

show :: Newline -> String

showList :: [Newline] -> ShowS

Eq Newline

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

(==) :: Newline -> Newline -> Bool

(/=) :: Newline -> Newline -> Bool

Ord Newline

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

compare :: Newline -> Newline -> Ordering

(<) :: Newline -> Newline -> Bool

(<=) :: Newline -> Newline -> Bool

(>) :: Newline -> Newline -> Bool

(>=) :: Newline -> Newline -> Bool

max :: Newline -> Newline -> Newline

min :: Newline -> Newline -> Newline

data NewlineMode

Specifies the translation, if any, of newline characters between internal Strings and the external file or stream. Haskell Strings are assumed to represent newlines with the '\n' character; the newline mode specifies how to translate '\n' on output, and what to translate into '\n' on input.

Constructors

NewlineMode

Fields

• inputNL :: Newline

  the representation of newlines on input

• outputNL :: Newline

  the representation of newlines on output

Instances

Read NewlineMode

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

readsPrec :: Int -> ReadS NewlineMode

readList :: ReadS [NewlineMode]

readPrec :: ReadPrec NewlineMode

readListPrec :: ReadPrec [NewlineMode]

Show NewlineMode

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

showsPrec :: Int -> NewlineMode -> ShowS

show :: NewlineMode -> String

showList :: [NewlineMode] -> ShowS

Eq NewlineMode

Since: base-4.2.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

(==) :: NewlineMode -> NewlineMode -> Bool

(/=) :: NewlineMode -> NewlineMode -> Bool

Ord NewlineMode

Since: base-4.3.0.0

Defined in GHC.Internal.IO.Handle.Types

Methods

compare :: NewlineMode -> NewlineMode -> Ordering

(<) :: NewlineMode -> NewlineMode -> Bool

(<=) :: NewlineMode -> NewlineMode -> Bool

(>) :: NewlineMode -> NewlineMode -> Bool

(>=) :: NewlineMode -> NewlineMode -> Bool

max :: NewlineMode -> NewlineMode -> NewlineMode

min :: NewlineMode -> NewlineMode -> NewlineMode

nativeNewline :: Newline

The native newline representation for the current platform: LF on Unix systems, CRLF on Windows.

noNewlineTranslation :: NewlineMode

Do no newline translation at all.

noNewlineTranslation  = NewlineMode { inputNL  = LF, outputNL = LF }

universalNewlineMode :: NewlineMode

Map '\r\n' into '\n' on input, and '\n' to the native newline representation on output. This mode can be used on any platform, and works with text files using any newline convention. The downside is that readFile >>= writeFile might yield a different file.

universalNewlineMode  = NewlineMode { inputNL  = CRLF,
                                      outputNL = nativeNewline }

nativeNewlineMode :: NewlineMode

Use the native newline representation on both input and output

nativeNewlineMode  = NewlineMode { inputNL  = nativeNewline
                                   outputNL = nativeNewline }

hShow :: Handle -> IO String

hShow is in the IO monad, and gives more comprehensive output than the (pure) instance of Show for Handle.

hWaitForInput :: Handle -> Int -> IO Bool

Computation hWaitForInput hdl t waits until input is available on handle hdl. It returns True as soon as input is available on hdl, or False if no input is available within t milliseconds. Note that hWaitForInput waits until one or more full characters are available, which means that it needs to do decoding, and hence may fail with a decoding error.

If t is less than zero, then hWaitForInput waits indefinitely.

This operation may fail with:

• isEOFError if the end of file has been reached.
• a decoding error, if the input begins with an invalid byte sequence in this Handle's encoding.

NOTE for GHC users: unless you use the -threaded flag, hWaitForInput hdl t where t >= 0 will block all other Haskell threads for the duration of the call. It behaves like a safe foreign call in this respect.

hGetChar :: Handle -> IO Char

Computation hGetChar hdl reads a character from the file or channel managed by hdl, blocking until a character is available.

This operation may fail with:

• isEOFError if the end of file has been reached.

hGetLine :: Handle -> IO String

Computation hGetLine hdl reads a line from the file or channel managed by hdl. hGetLine does not return the newline as part of the result.

A line is separated by the newline set with hSetNewlineMode or nativeNewline by default. The read newline character(s) are not returned as part of the result.

If hGetLine encounters end-of-file at any point while reading in the middle of a line, it is treated as a line terminator and the (partial) line is returned.

This operation may fail with:

• isEOFError if the end of file is encountered when reading the first character of the line.

Examples

>>> withFile "/home/user/foo" ReadMode hGetLine >>= putStrLn
this is the first line of the file :O

>>> withFile "/home/user/bar" ReadMode (replicateM 3 . hGetLine)
["this is the first line","this is the second line","this is the third line"]

hGetContents :: Handle -> IO String

Computation hGetContents hdl returns the list of characters corresponding to the unread portion of the channel or file managed by hdl, which is put into an intermediate state, semi-closed. In this state, hdl is effectively closed, but items are read from hdl on demand and accumulated in a special list returned by hGetContents hdl.

Any operation that fails because a handle is closed, also fails if a handle is semi-closed. The only exception is hClose. A semi-closed handle becomes closed:

• if hClose is applied to it;
• if an I/O error occurs when reading an item from the handle;
• or once the entire contents of the handle has been read.

Once a semi-closed handle becomes closed, the contents of the associated list becomes fixed. The contents of this final list is only partially specified: it will contain at least all the items of the stream that were evaluated prior to the handle becoming closed.

Any I/O errors encountered while a handle is semi-closed are simply discarded.

This operation may fail with:

• isEOFError if the end of file has been reached.

hGetContents' :: Handle -> IO String

The hGetContents' operation reads all input on the given handle before returning it as a String and closing the handle.

This is a strict version of hGetContents

Since: base-4.15.0.0

hPutChar :: Handle -> Char -> IO ()

Computation hPutChar hdl ch writes the character ch to the file or channel managed by hdl. Characters may be buffered if buffering is enabled for hdl.

This operation may fail with:

• isFullError if the device is full.
• isPermissionError if another system resource limit would be exceeded.

hPutStr :: Handle -> String -> IO ()

Computation hPutStr hdl s writes the string s to the file or channel managed by hdl.

Note that hPutStr is not concurrency safe unless the BufferMode of hdl is set to LineBuffering or BlockBuffering:

>>> let f = forkIO . hPutStr stdout
>>> in do hSetBuffering stdout NoBuffering; f "This is a longer string"; f ":D"; f "Hello Haskell"; pure ()
This: HDiesl lao  lHoansgkeerl lstring

>>> let f = forkIO . hPutStr stdout
>>> in do hSetBuffering stdout LineBuffering; f "This is a longer string"; f ":D"; f "Hello Haskell"; pure ()
This is a longer string:DHello Haskell

This operation may fail with:

• isFullError if the device is full.
• isPermissionError if another system resource limit would be exceeded.

hGetBuf :: Handle -> Ptr a -> Int -> IO Int

hGetBuf hdl buf count reads data from the handle hdl into the buffer buf until either EOF is reached or count 8-bit bytes have been read. It returns the number of bytes actually read. This may be zero if EOF was reached before any data was read (or if count is zero).

hGetBuf never raises an EOF exception, instead it returns a value smaller than count.

If the handle is a pipe or socket, and the writing end is closed, hGetBuf will behave as if EOF was reached.

hGetBuf ignores the prevailing TextEncoding and NewlineMode on the Handle, and reads bytes directly.

hGetBufNonBlocking :: Handle -> Ptr a -> Int -> IO Int

hGetBufNonBlocking hdl buf count reads data from the handle hdl into the buffer buf until either EOF is reached, or count 8-bit bytes have been read, or there is no more data available to read immediately.

hGetBufNonBlocking is identical to hGetBuf, except that it will never block waiting for data to become available, instead it returns only whatever data is available. To wait for data to arrive before calling hGetBufNonBlocking, use hWaitForInput.

If the handle is a pipe or socket, and the writing end is closed, hGetBufNonBlocking will behave as if EOF was reached.

hGetBufNonBlocking ignores the prevailing TextEncoding and NewlineMode on the Handle, and reads bytes directly.

NOTE: on Windows, this function does not work correctly; it behaves identically to hGetBuf.

hPutBuf :: Handle -> Ptr a -> Int -> IO ()

hPutBuf hdl buf count writes count 8-bit bytes from the buffer buf to the handle hdl. It returns ().

hPutBuf ignores any text encoding that applies to the Handle, writing the bytes directly to the underlying file or device.

hPutBuf ignores the prevailing TextEncoding and NewlineMode on the Handle, and writes bytes directly.

This operation may fail with:

• ResourceVanished if the handle is a pipe or socket, and the reading end is closed. (If this is a POSIX system, and the program has not asked to ignore SIGPIPE, then a SIGPIPE may be delivered instead, whose default action is to terminate the program).

hPutBufNonBlocking :: Handle -> Ptr a -> Int -> IO Int