Clash.Explicit.Testbench

Testbench functions for circuits

assert

Arguments

:: (KnownDomain dom, Eq a, ShowX a)

=> Clock dom

-> Reset dom

-> String

Additional message

-> Signal dom a

Checked value

-> Signal dom a

Expected value

-> Signal dom b

Return value

-> Signal dom b

Compares the first two Signals for equality and logs a warning when they are not equal. The second Signal is considered the expected value. This function simply returns the third Signal unaltered as its result. This function is used by outputVerifier.

Usage in clashi

NB: When simulating a component that uses assert in clashi, usually, the warnings are only logged the first time the component is simulated. Issuing :reload in clashi will discard the cached result of the computation, and warnings will once again be emitted.

NB: This function can be used in synthesizable designs.

assertBitVector

Arguments

:: (KnownDomain dom, KnownNat n)

=> Clock dom

-> Reset dom

-> String

Additional message

-> Signal dom (BitVector n)

Checked value

-> Signal dom (BitVector n)

Expected value

-> Signal dom b

Return value

-> Signal dom b

The same as assert, but can handle don't care bits in its expected value.

ignoreFor

Arguments

:: forall dom n a. KnownDomain dom

=> Clock dom

-> Reset dom

-> Enable dom

-> SNat n

Number of cycles to ignore incoming signal

-> a

Value function produces when ignoring signal

-> Signal dom a

Incoming signal

-> Signal dom a

Either a passthrough of the incoming signal, or the static value provided as the second argument.

Ignore signal for a number of cycles, while outputting a static value.

stimuliGenerator

Arguments

:: forall l dom a. (KnownNat l, KnownDomain dom)

=> Clock dom

Clock to which to synchronize the output signal

-> Reset dom

-> Vec l a

Samples to generate

-> Signal dom a

Signal of given samples

Example:

testInput
  :: KnownDomain dom
  => Clock dom
  -> Reset dom
  -> Signal dom Int
testInput clk rst = stimuliGenerator clk rst $(listToVecTH [(1::Int),3..21])

>>> sampleN 14 (testInput systemClockGen resetGen)
[1,1,3,5,7,9,11,13,15,17,19,21,21,21]

tbClockGen :: KnownDomain testDom => Signal testDom Bool -> Clock testDom

Clock generator to be used in the testBench function.

To be used like:

clkSystem en = tbClockGen @System en

Example

module Example where

import Clash.Explicit.Prelude
import Clash.Explicit.Testbench

-- Fast domain: twice as fast as "Slow"
createDomain vSystem{vName="Fast", vPeriod=10}

-- Slow domain: twice as slow as "Fast"
createDomain vSystem{vName="Slow", vPeriod=20}

topEntity
  :: Clock "Fast"
  -> Reset "Fast"
  -> Enable "Fast"
  -> Clock "Slow"
  -> Signal "Fast" (Unsigned 8)
  -> Signal "Slow" (Unsigned 8, Unsigned 8)
topEntity clk1 rst1 en1 clk2 i =
  let h = register clk1 rst1 en1 0 (register clk1 rst1 en1 0 i)
      l = register clk1 rst1 en1 0 i
  in  unsafeSynchronizer clk1 clk2 (bundle (h, l))

testBench
  :: Signal "Slow" Bool
testBench = done
  where
    testInput      = stimuliGenerator clkA1 rstA1 $(listToVecTH [1::Unsigned 8,2,3,4,5,6,7,8])
    expectedOutput = outputVerifier   clkB2 rstB2 $(listToVecTH [(0,0) :: (Unsigned 8, Unsigned 8),(1,2),(3,4),(5,6),(7,8)])
    done           = expectedOutput (topEntity clkA1 rstA1 enableGen clkB2 testInput)
    notDone        = not <$> done
    clkA1          = tbClockGen @"Fast" (unsafeSynchronizer clkB2 clkA1 notDone)
    clkB2          = tbClockGen @"Slow" notDone
    rstA1          = resetGen @"Fast"
    rstB2          = resetGen @"Slow"

tbEnableGen :: Enable tag

Enable signal that's always enabled. Because it has a blackbox definition this enable signal is opaque to other blackboxes. It will therefore never be optimized away.

tbSystemClockGen :: Signal System Bool -> Clock System

Clock generator for the System clock domain.

NB: Can be used in the testBench function

Example

topEntity :: Vec 2 (Vec 3 (Unsigned 8)) -> Vec 6 (Unsigned 8)
topEntity = concat

testBench :: Signal System Bool
testBench = done
  where
    testInput      = pure ((1 :> 2 :> 3 :> Nil) :> (4 :> 5 :> 6 :> Nil) :> Nil)
    expectedOutput = outputVerifier' ((1:>2:>3:>4:>5:>6:>Nil):>Nil)
    done           = exposeClockResetEnable (expectedOutput (topEntity <$> testInput)) clk rst
    clk            = tbSystemClockGen (not <$> done)
    rst            = systemResetGen

clockToDiffClock

Arguments

:: KnownDomain dom

=> Clock dom

Single-ended input

-> DiffClock dom

Differential output

Convert a single-ended clock to a differential clock

The tbClockGen function generates a single-ended clock. This function will output the two phases of a differential clock corresponding to that single-ended clock.

This function is only meant to be used in the testBench function, not to create a differential output in hardware.

Example:

clk = clockToDiffClock $ tbClockGen (not <$> done)

outputVerifier

Arguments

:: forall l a testDom circuitDom. (KnownNat l, KnownDomain testDom, KnownDomain circuitDom, Eq a, ShowX a, 1 <= l)

=> Clock testDom

Clock to which the test bench is synchronized (but not necessarily the circuit under test)

-> Clock circuitDom

Clock to which the circuit under test is synchronized

-> Reset testDom

Reset line of test bench

-> Vec l a

Samples to compare with

-> Signal circuitDom a

Signal to verify

-> Signal testDom Bool

True if all samples are verified

Compare a signal (coming from a circuit) to a vector of samples. If a sample from the signal is not equal to the corresponding sample in the vector, print to stderr and continue testing. This function is synthesizable in the sense that HDL simulators will run it. If testDom and circuitDom refer to the same domain, it can also be synthesized into hardware.

NB: This function uses assert. When simulating this function in clashi, read the note.

Example:

expectedOutput
  :: Clock dom -> Reset dom
  -> Signal dom Int -> Signal dom Bool
expectedOutput clk rst = outputVerifier clk rst $(listToVecTH ([70,99,2,3,4,5,7,8,9,10]::[Int]))

>>> import qualified Data.List as List
>>> sampleN 12 (expectedOutput systemClockGen resetGen (fromList (0:[0..10] List.++ [10,10,10])))

cycle(<Clock: System>): 0, outputVerifier
expected value: 70, not equal to actual value: 0
[False
cycle(<Clock: System>): 1, outputVerifier
expected value: 70, not equal to actual value: 0
,False
cycle(<Clock: System>): 2, outputVerifier
expected value: 99, not equal to actual value: 1
,False,False,False,False,False
cycle(<Clock: System>): 7, outputVerifier
expected value: 7, not equal to actual value: 6
,False
cycle(<Clock: System>): 8, outputVerifier
expected value: 8, not equal to actual value: 7
,False
cycle(<Clock: System>): 9, outputVerifier
expected value: 9, not equal to actual value: 8
,False
cycle(<Clock: System>): 10, outputVerifier
expected value: 10, not equal to actual value: 9
,False,True]

If you're working with BitVectors containing don't care bits you should use outputVerifierBitVector.

outputVerifier'

Arguments

:: forall l a dom. (KnownNat l, KnownDomain dom, Eq a, ShowX a, 1 <= l)

=> Clock dom

Clock to which the test bench is synchronized

-> Reset dom

Reset line of test bench

-> Vec l a

Samples to compare with

-> Signal dom a

Signal to verify

-> Signal dom Bool

Indicator that all samples are verified

Same as outputVerifier but used in cases where the test bench domain and the domain of the circuit under test are the same.

outputVerifierBitVector

Arguments

:: forall l n testDom circuitDom. (KnownNat l, KnownNat n, KnownDomain testDom, KnownDomain circuitDom, 1 <= l)

=> Clock testDom

Clock to which the test bench is synchronized (but not necessarily the circuit under test)

-> Clock circuitDom

Clock to which the circuit under test is synchronized

-> Reset testDom

Reset line of test bench

-> Vec l (BitVector n)

Samples to compare with

-> Signal circuitDom (BitVector n)

Signal to verify

-> Signal testDom Bool

Indicator that all samples are verified

Same as outputVerifier, but can handle don't care bits in its expected values.

outputVerifierBitVector'

Arguments

:: forall l n dom. (KnownNat l, KnownNat n, KnownDomain dom, 1 <= l)

=> Clock dom

Clock to which the input signal is synchronized

-> Reset dom

-> Vec l (BitVector n)

Samples to compare with

-> Signal dom (BitVector n)

Signal to verify

-> Signal dom Bool

Indicator that all samples are verified

Same as outputVerifier', but can handle don't care bits in its expected values.

biTbClockGen :: forall testDom circuitDom. (KnownDomain testDom, KnownDomain circuitDom) => Signal testDom Bool -> (Clock testDom, Clock circuitDom)

Same as tbClockGen, but returns two clocks on potentially different domains. To be used in situations where the test circuit potentially operates on a different clock than the device under test.

unsafeSimSynchronizer

Arguments

:: forall dom1 dom2 a. (KnownDomain dom1, KnownDomain dom2)

=> Clock dom1

Clock of the incoming signal

-> Clock dom2

Clock of the outgoing signal

-> Signal dom1 a

-> Signal dom2 a

Cross clock domains in a way that is unsuitable for hardware but good enough for simulation.

It's equal to unsafeSynchronizer but will warn when used outside of a test bench. outputVerifier uses this function when it needs to cross between clock domains, which will render it unsuitable for synthesis, but good enough for simulating the generated HDL.

outputVerifierWith

Arguments

:: forall l a testDom circuitDom. (KnownNat l, KnownDomain testDom, KnownDomain circuitDom, Eq a, ShowX a, 1 <= l)

=> (Clock testDom -> Reset testDom -> Signal testDom a -> Signal testDom a -> Signal testDom Bool -> Signal testDom Bool)

The assert function to use

-> Clock testDom

Clock to which the test bench is synchronized (but not necessarily the circuit under test)

-> Clock circuitDom

Clock to which the circuit under test is synchronized

-> Reset testDom

Reset line of test bench

-> Vec l a

Samples to compare with

-> Signal circuitDom a

Signal to verify

-> Signal testDom Bool

True if all samples are verified