Clash.Prelude.ROM.File

Initializing a ROM with a data file

ROMs initialized with a data file. The BNF grammar for this data file is simple:

FILE = LINE+
LINE = BIT+
BIT  = '0'
     | '1'

Consecutive LINEs correspond to consecutive memory addresses starting at 0. For example, a data file memory.bin containing the 9-bit unsigned numbers 7 to 13 looks like:

000000111
000001000
000001001
000001010
000001011
000001100
000001101

Such a file can be produced with memFile:

writeFile "memory.bin" (memFile Nothing [7 :: Unsigned 9 .. 13])

We can instantiate a synchronous ROM using the contents of the file above like so:

f :: (HiddenClock dom, HiddenEnable dom)
   => Signal dom (Unsigned 3)
   -> Signal dom (Unsigned 9)
f rd = unpack <$> romFile d7 "memory.bin" rd

And see that it works as expected:

>>> import qualified Data.List as L
>>> L.tail $ sampleN 4 $ f (fromList [3..5])
[10,11,12]

However, we can also interpret the same data as a tuple of a 6-bit unsigned number, and a 3-bit signed number:

g :: (HiddenClock dom, HiddenEnable dom)
  => Signal dom (Unsigned 3)
  -> Signal dom (Unsigned 6,Signed 3)
g rd = unpack <$> romFile d7 "memory.bin" rd

And then we would see:

>>> import qualified Data.List as L
>>> L.tail $ sampleN 4 $ g (fromList [3..5])
[(1,2),(1,3)(1,-4)]

Asynchronous ROM

asyncRomFile

Arguments

:: (KnownNat m, Enum addr)

=> SNat n

Size of the ROM

-> FilePath

File describing the content of the ROM

-> addr

Read address r

-> BitVector m

The value of the ROM at address r

An asynchronous/combinational ROM with space for n elements

• NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

	VHDL	Verilog	SystemVerilog
Altera/Quartus	Broken	Works	Works
Xilinx/ISE	Works	Works	Works
ASIC	Untested	Untested	Untested

See also:

• See Clash.Prelude.ROM.File for more information on how to instantiate a ROM with the contents of a data file.
• See Clash.Sized.Fixed for ideas on how to create your own data files.

• When you notice that asyncRomFile is significantly slowing down your simulation, give it a monomorphic type signature. So instead of leaving the type to be inferred:

  myRomData = asyncRomFile d512 "memory.bin"
  

  or giving it a polymorphic type signature:

  myRomData :: Enum addr => addr -> BitVector 16
  myRomData = asyncRomFile d512 "memory.bin"
  

  you should give it a monomorphic type signature:

  myRomData :: Unsigned 9 -> BitVector 16
  myRomData = asyncRomFile d512 "memory.bin"
  

asyncRomFilePow2

Arguments

:: forall n m. (KnownNat m, KnownNat n)

=> FilePath

File describing the content of the ROM

-> Unsigned n

Read address r

-> BitVector m

The value of the ROM at address r

An asynchronous/combinational ROM with space for 2^n elements

• NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

	VHDL	Verilog	SystemVerilog
Altera/Quartus	Broken	Works	Works
Xilinx/ISE	Works	Works	Works
ASIC	Untested	Untested	Untested

See also:

• See Clash.Prelude.ROM.File for more information on how to instantiate a ROM with the contents of a data file.
• See Clash.Sized.Fixed for ideas on how to create your own data files.

• When you notice that asyncRomFilePow2 is significantly slowing down your simulation, give it a monomorphic type signature. So instead of leaving the type to be inferred:

  myRomData = asyncRomFilePow2 "memory.bin"
  

  you should give it a monomorphic type signature:

  myRomData :: Unsigned 9 -> BitVector 16
  myRomData = asyncRomFilePow2 "memory.bin"
  

Synchronous ROM synchronized to an arbitrary clock

romFile

Arguments

:: (KnownNat m, KnownNat n, HiddenClock dom, HiddenEnable dom, Enum addr)

=> SNat n

Size of the ROM

-> FilePath

File describing the content of the ROM

-> Signal dom addr

Read address r

-> Signal dom (BitVector m)

The value of the ROM at address r from the previous clock cycle

A ROM with a synchronous read port, with space for n elements

• NB: Read value is delayed by 1 cycle
• NB: Initial output value is undefined, reading it will throw an XException
• NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

	VHDL	Verilog	SystemVerilog
Altera/Quartus	Broken	Works	Works
Xilinx/ISE	Works	Works	Works
ASIC	Untested	Untested	Untested

See also:

• See Clash.Prelude.ROM.File for more information on how to instantiate a ROM with the contents of a data file.
• See Clash.Sized.Fixed for ideas on how to create your own data files.

romFilePow2

Arguments

:: forall n m dom. (KnownNat m, KnownNat n, HiddenClock dom, HiddenEnable dom)

=> FilePath

File describing the content of the ROM

-> Signal dom (Unsigned n)

Read address r

-> Signal dom (BitVector m)

The value of the ROM at address r from the previous clock cycle

A ROM with a synchronous read port, with space for 2^n elements

• NB: Read value is delayed by 1 cycle
• NB: Initial output value is undefined, reading it will throw an XException
• NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

	VHDL	Verilog	SystemVerilog
Altera/Quartus	Broken	Works	Works
Xilinx/ISE	Works	Works	Works
ASIC	Untested	Untested	Untested

See also:

• See Clash.Prelude.ROM.File for more information on how to instantiate a ROM with the contents of a data file.
• See Clash.Sized.Fixed for ideas on how to create your own data files.

Producing files

memFile

Arguments

:: forall a f. (BitPack a, Foldable f, HasCallStack)

=> Maybe Bit

Value to map don't care bits to. Nothing means throwing an error on don't care bits.

-> f a

Values to convert

-> String

Contents of the memory file

Convert data to the String contents of a memory file.

• NB: Not synthesizable

• The following document the several ways to instantiate components with files:

  • Clash.Prelude.BlockRam.File
  • Clash.Prelude.ROM.File
  • Clash.Explicit.BlockRam.File
  • Clash.Explicit.ROM.File
• See Clash.Sized.Fixed for more ideas on how to create your own data files.

Example

The Maybe datatype has don't care bits, where the actual value does not matter. But the bits need a defined value in the memory. Either 0 or 1 can be used, and both are valid representations of the data.

>>> let es = [ Nothing, Just (7 :: Unsigned 8), Just 8]
>>> mapM_ (putStrLn . show . pack) es
0b0_...._....
0b1_0000_0111
0b1_0000_1000
>>> putStr (memFile (Just 0) es)
000000000
100000111
100001000
>>> putStr (memFile (Just 1) es)
011111111
100000111
100001000

Internal

asyncRomFile#

Arguments

:: KnownNat m

=> SNat n

Size of the ROM

-> FilePath

File describing the content of the ROM

-> Int

Read address r

-> BitVector m

The value of the ROM at address r

asyncRomFile primitive