Control.Comonad

Comonads

class Functor w => Comonad w where

There are two ways to define a comonad:

I. Provide definitions for extract and extend satisfying these laws:

extend extract      = id
extract . extend f  = f
extend f . extend g = extend (f . extend g)

In this case, you may simply set fmap = liftW.

These laws are directly analogous to the laws for monads and perhaps can be made clearer by viewing them as laws stating that Cokleisli composition must be associative, and has extract for a unit:

f =>= extract   = f
extract =>= f   = f
(f =>= g) =>= h = f =>= (g =>= h)

II. Alternately, you may choose to provide definitions for fmap, extract, and duplicate satisfying these laws:

extract . duplicate      = id
fmap extract . duplicate = id
duplicate . duplicate    = fmap duplicate . duplicate

In this case you may not rely on the ability to define fmap in terms of liftW.

You may of course, choose to define both duplicate and extend. In that case you must also satisfy these laws:

extend f  = fmap f . duplicate
duplicate = extend id
fmap f    = extend (f . extract)

These are the default definitions of extend and duplicate and the definition of liftW respectively.

Methods

extract :: w a -> a

 extract . fmap f = f . extract

duplicate :: w a -> w (w a)

 duplicate = extend id
 fmap (fmap f) . duplicate = duplicate . fmap f

extend :: (w a -> b) -> w a -> w b

 extend f = fmap f . duplicate

Instances

Comonad Tree

Comonad Identity

Comonad NonEmpty

Monoid m => Comonad ((->) m)

Comonad ((,) e)

Comonad w => Comonad (IdentityT w)

Comonad (Tagged * s)

Comonad w => Comonad (EnvT e w)

Comonad w => Comonad (StoreT s w)

(Comonad w, Monoid m) => Comonad (TracedT m w)

(Comonad f, Comonad g) => Comonad (Coproduct f g)

liftW :: Comonad w => (a -> b) -> w a -> w b

A suitable default definition for fmap for a Comonad. Promotes a function to a comonad.

You can only safely use to define fmap if your Comonad defined extend, not just duplicate, since defining extend in terms of duplicate uses fmap!

 fmap f = liftW f = extend (f . extract)

wfix :: Comonad w => w (w a -> a) -> a

Comonadic fixed point à la Menendez

cfix :: Comonad w => (w a -> a) -> w a

Comonadic fixed point à la Orchard

(=>=) :: Comonad w => (w a -> b) -> (w b -> c) -> w a -> c

Left-to-right Cokleisli composition

(=<=) :: Comonad w => (w b -> c) -> (w a -> b) -> w a -> c

Right-to-left Cokleisli composition

(<<=) :: Comonad w => (w a -> b) -> w a -> w b

extend in operator form

(=>>) :: Comonad w => w a -> (w a -> b) -> w b

extend with the arguments swapped. Dual to >>= for a Monad.

Combining Comonads

class Comonad w => ComonadApply w where

ComonadApply is to Comonad like Applicative is to Monad.

Mathematically, it is a strong lax symmetric semi-monoidal comonad on the category Hask of Haskell types. That it to say that w is a strong lax symmetric semi-monoidal functor on Hask, where both extract and duplicate are symmetric monoidal natural transformations.

Laws:

 (.) <$> u <@> v <@> w = u <@> (v <@> w)
 extract (p <@> q) = extract p (extract q)
 duplicate (p <@> q) = (<@>) <$> duplicate p <@> duplicate q

If our type is both a ComonadApply and Applicative we further require

 (<*>) = (<@>)

Finally, if you choose to define (<@) and (@>), the results of your definitions should match the following laws:

 a @> b = const id <$> a <@> b
 a <@ b = const <$> a <@> b

Methods

(<@>) :: w (a -> b) -> w a -> w b

(@>) :: w a -> w b -> w b

(<@) :: w a -> w b -> w a

Instances

ComonadApply Tree

ComonadApply Identity

ComonadApply NonEmpty

Monoid m => ComonadApply ((->) m)

Semigroup m => ComonadApply ((,) m)

ComonadApply w => ComonadApply (IdentityT w)

(Semigroup e, ComonadApply w) => ComonadApply (EnvT e w)

(ComonadApply w, Semigroup s) => ComonadApply (StoreT s w)

(ComonadApply w, Monoid m) => ComonadApply (TracedT m w)

(<@@>) :: ComonadApply w => w a -> w (a -> b) -> w b

A variant of <@> with the arguments reversed.

liftW2 :: ComonadApply w => (a -> b -> c) -> w a -> w b -> w c

Lift a binary function into a Comonad with zipping

liftW3 :: ComonadApply w => (a -> b -> c -> d) -> w a -> w b -> w c -> w d

Lift a ternary function into a Comonad with zipping

Cokleisli Arrows

newtype Cokleisli w a b

The Cokleisli Arrows of a given Comonad

Constructors

Cokleisli

Fields

runCokleisli :: w a -> b

Instances

Typeable1 w => Typeable2 (Cokleisli w)

Comonad w => Arrow (Cokleisli w)

Comonad w => ArrowChoice (Cokleisli w)

Comonad w => ArrowApply (Cokleisli w)

ComonadApply w => ArrowLoop (Cokleisli w)

Comonad w => Category (Cokleisli w)

Monad (Cokleisli w a)

Functor (Cokleisli w a)

Applicative (Cokleisli w a)

Functors

class Functor f where

The Functor class is used for types that can be mapped over. Instances of Functor should satisfy the following laws:

 fmap id  ==  id
 fmap (f . g)  ==  fmap f . fmap g

The instances of Functor for lists, Maybe and IO satisfy these laws.

Methods

fmap :: (a -> b) -> f a -> f b

(<$) :: a -> f b -> f a

Replace all locations in the input with the same value. The default definition is fmap . const, but this may be overridden with a more efficient version.

Instances

Functor []

Functor IO

Functor Id

Functor ZipList

Functor ReadPrec

Functor ReadP

Functor Maybe

Functor Tree

Functor Identity

Functor Min

Functor Max

Functor First

Functor Last

Functor Option

Functor NonEmpty

Functor ((->) r)

Functor (Either a)

Functor ((,) a)

Ix i => Functor (Array i)

Functor (StateL s)

Functor (StateR s)

Functor (Const m)

Monad m => Functor (WrappedMonad m)

Arrow a => Functor (ArrowMonad a)

Functor m => Functor (IdentityT m)

Arrow a => Functor (WrappedArrow a b)

Functor (Tagged k s)

(Functor f, Functor g) => Functor (Compose f g)

Functor (Cokleisli w a)

Functor w => Functor (EnvT e w)

Functor w => Functor (StoreT s w)

Functor w => Functor (TracedT m w)

(Functor f, Functor g) => Functor (Coproduct f g)

(<$>) :: Functor f => (a -> b) -> f a -> f b

An infix synonym for fmap.

($>) :: Functor f => f a -> b -> f b

Replace the contents of a functor uniformly with a constant value.