Data.Conduit.Internal

Types

data Pipe l i o u m r

The underlying datatype for all the types in this package. In has six type parameters:

• l is the type of values that may be left over from this Pipe. A Pipe with no leftovers would use Void here, and one with leftovers would use the same type as the i parameter. Leftovers are automatically provided to the next Pipe in the monadic chain.
• i is the type of values for this Pipe's input stream.
• o is the type of values for this Pipe's output stream.
• u is the result type from the upstream Pipe.
• m is the underlying monad.
• r is the result type.

A basic intuition is that every Pipe produces a stream of output values (o), and eventually indicates that this stream is terminated by sending a result (r). On the receiving end of a Pipe, these become the i and u parameters.

Since 0.5.0

Constructors

HaveOutput (Pipe l i o u m r) (m ()) o

Provide new output to be sent downstream. This constructor has three fields: the next Pipe to be used, a finalization function, and the output value.

NeedInput (i -> Pipe l i o u m r) (u -> Pipe l i o u m r)

Request more input from upstream. The first field takes a new input value and provides a new Pipe. The second takes an upstream result value, which indicates that upstream is producing no more results.

Done r

Processing with this Pipe is complete, providing the final result.

PipeM (m (Pipe l i o u m r))

Require running of a monadic action to get the next Pipe.

Leftover (Pipe l i o u m r) l

Return leftover input, which should be provided to future operations.

Instances

MonadRWS r w s m => MonadRWS r w s (Pipe l i o u m)

MonadBase base m => MonadBase base (Pipe l i o u m)

MonadError e m => MonadError e (Pipe l i o u m)

MonadReader r m => MonadReader r (Pipe l i o u m)

MonadState s m => MonadState s (Pipe l i o u m)

MonadWriter w m => MonadWriter w (Pipe l i o u m)

MFunctor (Pipe l i o u)

Since 1.0.4

MonadTrans (Pipe l i o u)

Monad m => Monad (Pipe l i o u m)

Monad m => Functor (Pipe l i o u m)

Monad m => Applicative (Pipe l i o u m)

MonadThrow m => MonadThrow (Pipe l i o u m)

MonadCatch m => MonadCatch (Pipe l i o u m)

MonadIO m => MonadIO (Pipe l i o u m)

MonadResource m => MonadResource (Pipe l i o u m)

Monad m => Monoid (Pipe l i o u m ())

newtype ConduitM i o m r

Core datatype of the conduit package. This type represents a general component which can consume a stream of input values i, produce a stream of output values o, perform actions in the m monad, and produce a final result r. The type synonyms provided here are simply wrappers around this type.

Since 1.0.0

Constructors

ConduitM

Fields

unConduitM :: Pipe i i o () m r

Instances

MonadRWS r w s m => MonadRWS r w s (ConduitM i o m)

MonadBase base m => MonadBase base (ConduitM i o m)

MonadError e m => MonadError e (ConduitM i o m)

MonadReader r m => MonadReader r (ConduitM i o m)

MonadState s m => MonadState s (ConduitM i o m)

MonadWriter w m => MonadWriter w (ConduitM i o m)

MFunctor (ConduitM i o)

MonadTrans (ConduitM i o)

Monad m => Monad (ConduitM i o m)

Monad m => Functor (ConduitM i o m)

Monad m => Applicative (ConduitM i o m)

MonadThrow m => MonadThrow (ConduitM i o m)

MonadCatch m => MonadCatch (ConduitM i o m)

MonadIO m => MonadIO (ConduitM i o m)

MonadResource m => MonadResource (ConduitM i o m)

Monad m => Monoid (ConduitM i o m ())

type Source m o = ConduitM () o m ()

Provides a stream of output values, without consuming any input or producing a final result.

Since 0.5.0

type Producer m o = forall i. ConduitM i o m ()

A component which produces a stream of output values, regardless of the input stream. A Producer is a generalization of a Source, and can be used as either a Source or a Conduit.

Since 1.0.0

type Sink i = ConduitM i Void

Consumes a stream of input values and produces a final result, without producing any output.

 type Sink i m r = ConduitM i Void m r

Since 0.5.0

type Consumer i m r = forall o. ConduitM i o m r

A component which consumes a stream of input values and produces a final result, regardless of the output stream. A Consumer is a generalization of a Sink, and can be used as either a Sink or a Conduit.

Since 1.0.0

type Conduit i m o = ConduitM i o m ()

Consumes a stream of input values and produces a stream of output values, without producing a final result.

Since 0.5.0

data ResumableSource m o

A Source which has been started, but has not yet completed.

This type contains both the current state of the Source, and the finalizer to be run to close it.

Since 0.5.0

Constructors

ResumableSource (Source m o) (m ())

Instances

MFunctor ResumableSource

Since 1.0.13

data ResumableConduit i m o

A generalization of ResumableSource. Allows to resume an arbitrary conduit, keeping its state and using it later (or finalizing it).

Since 1.0.17

Constructors

ResumableConduit (Conduit i m o) (m ())

Primitives

await :: Pipe l i o u m (Maybe i)

Wait for a single input value from upstream.

Since 0.5.0

awaitE :: Pipe l i o u m (Either u i)

This is similar to await, but will return the upstream result value as Left if available.

Since 0.5.0

awaitForever :: Monad m => (i -> Pipe l i o r m r') -> Pipe l i o r m r

Wait for input forever, calling the given inner Pipe for each piece of new input. Returns the upstream result type.

Since 0.5.0

yield

Arguments

:: Monad m

=> o

output value

-> Pipe l i o u m ()

Send a single output value downstream. If the downstream Pipe terminates, this Pipe will terminate as well.

Since 0.5.0

yieldM :: Monad m => m o -> Pipe l i o u m ()

yieldOr

Arguments

:: Monad m

=> o

-> m ()

finalizer

-> Pipe l i o u m ()

Similar to yield, but additionally takes a finalizer to be run if the downstream Pipe terminates.

Since 0.5.0

leftover :: l -> Pipe l i o u m ()

Provide a single piece of leftover input to be consumed by the next pipe in the current monadic binding.

Note: it is highly encouraged to only return leftover values from input already consumed from upstream.

Since 0.5.0

Finalization

bracketP :: MonadResource m => IO a -> (a -> IO ()) -> (a -> Pipe l i o u m r) -> Pipe l i o u m r

Perform some allocation and run an inner Pipe. Two guarantees are given about resource finalization:

1. It will be prompt. The finalization will be run as early as possible.
2. It is exception safe. Due to usage of resourcet, the finalization will be run in the event of any exceptions.

Since 0.5.0

addCleanup

Arguments

:: Monad m

=> (Bool -> m ())

True if Pipe ran to completion, False for early termination.

-> Pipe l i o u m r

-> Pipe l i o u m r

Add some code to be run when the given Pipe cleans up.

Since 0.4.1

Composition

idP :: Monad m => Pipe l a a r m r

The identity Pipe.

Since 0.5.0

pipe :: Monad m => Pipe l a b r0 m r1 -> Pipe Void b c r1 m r2 -> Pipe l a c r0 m r2

Compose a left and right pipe together into a complete pipe. The left pipe will be automatically closed when the right pipe finishes.

Since 0.5.0

pipeL :: Monad m => Pipe l a b r0 m r1 -> Pipe b b c r1 m r2 -> Pipe l a c r0 m r2

Same as pipe, but automatically applies injectLeftovers to the right Pipe.

Since 0.5.0

connectResume :: Monad m => ResumableSource m o -> Sink o m r -> m (ResumableSource m o, r)

Connect a Source to a Sink until the latter closes. Returns both the most recent state of the Source and the result of the Sink.

We use a ResumableSource to keep track of the most recent finalizer provided by the Source.

Since 0.5.0

connectResumeConduit :: Monad m => ResumableConduit i m o -> Sink o m r -> Sink i m (ResumableConduit i m o, r)

Connect a ResumableConduit to a sink and return the output of the sink together with a new ResumableConduit.

Since 1.0.17

runPipe :: Monad m => Pipe Void () Void () m r -> m r

Run a pipeline until processing completes.

Since 0.5.0

injectLeftovers :: Monad m => Pipe i i o u m r -> Pipe l i o u m r

Transforms a Pipe that provides leftovers to one which does not, allowing it to be composed.

This function will provide any leftover values within this Pipe to any calls to await. If there are more leftover values than are demanded, the remainder are discarded.

Since 0.5.0

(>+>) :: Monad m => Pipe l a b r0 m r1 -> Pipe Void b c r1 m r2 -> Pipe l a c r0 m r2

Fuse together two Pipes, connecting the output from the left to the input of the right.

Notice that the leftover parameter for the Pipes must be Void. This ensures that there is no accidental data loss of leftovers during fusion. If you have a Pipe with leftovers, you must first call injectLeftovers.

Since 0.5.0

(<+<) :: Monad m => Pipe Void b c r1 m r2 -> Pipe l a b r0 m r1 -> Pipe l a c r0 m r2

Same as >+>, but reverse the order of the arguments.

Since 0.5.0

fuseLeftovers :: Monad m => ([b] -> [a]) -> ConduitM a b m () -> ConduitM b c m r -> ConduitM a c m r

Similar to fuseReturnLeftovers, but use the provided function to convert downstream leftovers to upstream leftovers.

Since 1.0.17

fuseReturnLeftovers :: Monad m => ConduitM a b m () -> ConduitM b c m r -> ConduitM a c m (r, [b])

Same as normal fusion (e.g. =$=), except instead of discarding leftovers from the downstream component, return them.

Since 1.0.17

Generalizing

sourceToPipe :: Monad m => Source m o -> Pipe l i o u m ()

sinkToPipe :: Monad m => Sink i m r -> Pipe l i o u m r

conduitToPipe :: Monad m => Conduit i m o -> Pipe l i o u m ()

toProducer :: Monad m => Source m a -> Producer m a

Generalize a Source to a Producer.

Since 1.0.0

toConsumer :: Monad m => Sink a m b -> Consumer a m b

Generalize a Sink to a Consumer.

Since 1.0.0

Exceptions

catchP :: (MonadBaseControl IO m, Exception e) => Pipe l i o u m r -> (e -> Pipe l i o u m r) -> Pipe l i o u m r

See catchC for more details.

Since 1.0.11

handleP :: (MonadBaseControl IO m, Exception e) => (e -> Pipe l i o u m r) -> Pipe l i o u m r -> Pipe l i o u m r

The same as flip catchP.

Since 1.0.11

tryP :: (MonadBaseControl IO m, Exception e) => Pipe l i o u m r -> Pipe l i o u m (Either e r)

See tryC for more details.

Since 1.0.11

catchC :: (MonadBaseControl IO m, Exception e) => ConduitM i o m r -> (e -> ConduitM i o m r) -> ConduitM i o m r

Catch all exceptions thrown by the current component of the pipeline.

Note: this will not catch exceptions thrown by other components! For example, if an exception is thrown in a Source feeding to a Sink, and the Sink uses catchC, the exception will not be caught.

Due to this behavior (as well as lack of async exception handling), you should not try to implement combinators such as onException in terms of this primitive function.

Note also that the exception handling will not be applied to any finalizers generated by this conduit.

Since 1.0.11

handleC :: (MonadBaseControl IO m, Exception e) => (e -> ConduitM i o m r) -> ConduitM i o m r -> ConduitM i o m r

The same as flip catchC.

Since 1.0.11

tryC :: (MonadBaseControl IO m, Exception e) => ConduitM i o m r -> ConduitM i o m (Either e r)

A version of try for use within a pipeline. See the comments in catchC for more details.

Since 1.0.11

Utilities

transPipe :: Monad m => (forall a. m a -> n a) -> Pipe l i o u m r -> Pipe l i o u n r

Transform the monad that a Pipe lives in.

Note that the monad transforming function will be run multiple times, resulting in unintuitive behavior in some cases. For a fuller treatment, please see:

https://github.com/snoyberg/conduit/wiki/Dealing-with-monad-transformers

This function is just a synonym for hoist.

Since 0.4.0

mapOutput :: Monad m => (o1 -> o2) -> Pipe l i o1 u m r -> Pipe l i o2 u m r

Apply a function to all the output values of a Pipe.

This mimics the behavior of fmap for a Source and Conduit in pre-0.4 days.

Since 0.4.1

mapOutputMaybe :: Monad m => (o1 -> Maybe o2) -> Pipe l i o1 u m r -> Pipe l i o2 u m r

Same as mapOutput, but use a function that returns Maybe values.

Since 0.5.0

mapInput

Arguments

:: Monad m

=> (i1 -> i2)

map initial input to new input

-> (l2 -> Maybe l1)

map new leftovers to initial leftovers

-> Pipe l2 i2 o u m r

-> Pipe l1 i1 o u m r

Apply a function to all the input values of a Pipe.

Since 0.5.0

sourceList :: Monad m => [a] -> Pipe l i a u m ()

Convert a list into a source.

Since 0.3.0

withUpstream :: Monad m => Pipe l i o u m r -> Pipe l i o u m (u, r)

Returns a tuple of the upstream and downstream results. Note that this will force consumption of the entire input stream.

Since 0.5.0

unwrapResumable :: MonadIO m => ResumableSource m o -> m (Source m o, m ())

Unwraps a ResumableSource into a Source and a finalizer.

A ResumableSource represents a Source which has already been run, and therefore has a finalizer registered. As a result, if we want to turn it into a regular Source, we need to ensure that the finalizer will be run appropriately. By appropriately, I mean:

• If a new finalizer is registered, the old one should not be called.
• If the old one is called, it should not be called again.

This function returns both a Source and a finalizer which ensures that the above two conditions hold. Once you call that finalizer, the Source is invalidated and cannot be used.

Since 0.5.2

unwrapResumableConduit :: MonadIO m => ResumableConduit i m o -> m (Conduit i m o, m ())

Unwraps a ResumableConduit into a Conduit and a finalizer.

Since unwrapResumable for more information.

Since 1.0.17

newResumableSource :: Monad m => Source m o -> ResumableSource m o

Turn a Source into a ResumableSource with no attached finalizer.

Since 1.1.4

newResumableConduit :: Monad m => Conduit i m o -> ResumableConduit i m o

Turn a Conduit into a ResumableConduit with no attached finalizer.

Since 1.1.4

enumFromTo :: (Enum o, Eq o, Monad m) => o -> o -> Pipe l i o u m ()

zipSinks :: Monad m => Sink i m r -> Sink i m r' -> Sink i m (r, r')

Combines two sinks. The new sink will complete when both input sinks have completed.

Any leftovers are discarded.

Since 0.4.1

zipSources :: Monad m => Source m a -> Source m b -> Source m (a, b)

Combines two sources. The new source will stop producing once either source has been exhausted.

Since 1.0.13

zipSourcesApp :: Monad m => Source m (a -> b) -> Source m a -> Source m b

Combines two sources. The new source will stop producing once either source has been exhausted.

Since 1.0.13

zipConduitApp :: Monad m => ConduitM i o m (x -> y) -> ConduitM i o m x -> ConduitM i o m y

Since 1.0.17

passthroughSink

Arguments

:: Monad m

=> Sink i m r

-> (r -> m ())

finalizer

-> Conduit i m i

Turn a Sink into a Conduit in the following way:

• All input passed to the Sink is yielded downstream.
• When the Sink finishes processing, the result is passed to the provided to the finalizer function.

Note that the Sink will stop receiving input as soon as the downstream it is connected to shuts down.

An example usage would be to write the result of a Sink to some mutable variable while allowing other processing to continue.

Since 1.1.0

generalizeUpstream :: Monad m => Pipe l i o () m r -> Pipe l i o u m r

Generalize the upstream return value for a Pipe from unit to any type.

Since 1.1.5