System.IO.Streams

This module is a top-level convenience module which re-exports most of the io-streams library.

It is recommended to import this module qualified, as follows:

 import           System.IO.Streams (Generator, InputStream, OutputStream)
 import qualified System.IO.Streams as Streams

For an in-depth tutorial on how to use io-streams, please see the System.IO.Streams.Tutorial module.

Is there a function missing from this library? Interested in contributing? Send a pull request to http://github.com/snapframework/io-streams.

Stream types

data InputStream a

An InputStream generates values of type c in the IO monad.

Two primitive operations are defined on InputStream:

• read :: InputStream c -> IO (Maybe c) reads a value from the stream, where "end of stream" is signaled by read returning Nothing.
• unRead :: c -> InputStream c -> IO () "pushes back" a value to the stream.

It is intended that InputStreams obey the following law:

unRead c stream >> read stream === return (Just c)

Instances

Typeable1 InputStream

BufferedIO (StreamPair ByteString)

BufferedIO (InputStream ByteString)

RawIO (StreamPair ByteString)

RawIO (InputStream ByteString)

IODevice (StreamPair ByteString)

IODevice (InputStream ByteString)

data OutputStream a

An OutputStream consumes values of type c in the IO monad. The only primitive operation defined on OutputStream is:

• write :: Maybe c -> OutputStream c -> IO ()

Values of type c are written in an OutputStream by wrapping them in Just, and the end of the stream is indicated by supplying Nothing.

If you supply a value after a Nothing, the behavior is defined by the implementer of the given OutputStream. (All OutputStream definitions in this library will simply discard the extra input.)

Instances

Typeable1 OutputStream

BufferedIO (StreamPair ByteString)

BufferedIO (OutputStream ByteString)

RawIO (StreamPair ByteString)

RawIO (OutputStream ByteString)

IODevice (StreamPair ByteString)

IODevice (OutputStream ByteString)

A note about resource acquisition/release semantics

In general, the convention within this library is that input and output streams do not deal with resource acquisition/release semantics, with rare exceptions like withFileAsInput. For example, sending "end-of-stream" to an OutputStream wrapped around a Handle doesn't cause the handle to be closed. You can think of streams as little state machines that are attached to the underlying resources, and the finalization/release of these resources is up to you.

This means that you can use standard Haskell idioms like bracket to handle resource acquisition and cleanup in an exception-safe way.

Creating streams

makeInputStream :: IO (Maybe a) -> IO (InputStream a)

Creates an InputStream from a value-producing action.

(makeInputStream m) calls the action m each time you request a value from the InputStream. The given action is extended with the default pushback mechanism (see System.IO.Streams.Internal).

makeOutputStream :: (Maybe a -> IO ()) -> IO (OutputStream a)

Creates an OutputStream from a value-consuming action.

(makeOutputStream f) runs the computation f on each value fed to it.

Primitive stream operations

read :: InputStream a -> IO (Maybe a)

Reads one value from an InputStream.

Returns either a value wrapped in a Just, or Nothing if the end of the stream is reached.

unRead :: a -> InputStream a -> IO ()

Pushes a value back onto an input stream. read and unRead should satisfy the following law, with the possible exception of side effects:

 Streams.unRead c stream >> Streams.read stream === return (Just c)

Note that this could be used to add values back to the stream that were not originally drawn from the stream.

peek :: InputStream a -> IO (Maybe a)

Observes the first value from an InputStream without consuming it.

Returns Nothing if the InputStream is empty. peek satisfies the following law:

 Streams.peek stream >> Streams.read stream === Streams.read stream

write :: Maybe a -> OutputStream a -> IO ()

Feeds a value to an OutputStream. Values of type c are written in an OutputStream by wrapping them in Just, and the end of the stream is indicated by supplying Nothing.

atEOF :: InputStream a -> IO Bool

Checks if an InputStream is at end-of-stream.

Connecting streams together

connect :: InputStream a -> OutputStream a -> IO ()

Connects an InputStream and OutputStream, supplying values from the InputStream to the OutputStream, and propagating the end-of-stream message from the InputStream through to the OutputStream.

The connection ends when the InputStream yields a Nothing.

connectTo :: OutputStream a -> InputStream a -> IO ()

The connectTo function is just flip connect.

Useful for writing expressions like fromList [1,2,3] >>= connectTo foo.

supply :: InputStream a -> OutputStream a -> IO ()

Connects an InputStream to an OutputStream without passing the end-of-stream notification through to the OutputStream.

Use this to supply an OutputStream with multiple InputStreams and use connect for the final InputStream to finalize the OutputStream, like so:

 do Streams.supply  input1 output
    Streams.supply  input2 output
    Streams.connect input3 output

supplyTo :: OutputStream a -> InputStream a -> IO ()

supply with the arguments flipped.

appendInputStream :: InputStream a -> InputStream a -> IO (InputStream a)

appendInputStream concatenates two InputStreams, analogous to (++) for lists.

The second InputStream continues where the first InputStream ends.

Note: values pushed back to appendInputStream are not propagated to either wrapped InputStream.

concatInputStreams :: [InputStream a] -> IO (InputStream a)

concatInputStreams concatenates a list of InputStreams, analogous to (++) for lists.

Subsequent InputStreams continue where the previous one InputStream ends.

Note: values pushed back to the InputStream returned by concatInputStreams are not propagated to any of the source InputStreams.

Thread safety / concurrency

lockingInputStream :: InputStream a -> IO (InputStream a)

Converts an InputStream into a thread-safe InputStream, at a slight performance penalty.

For performance reasons, this library provides non-thread-safe streams by default. Use the locking functions to convert these streams into slightly slower, but thread-safe, equivalents.

lockingOutputStream :: OutputStream a -> IO (OutputStream a)

Converts an OutputStream into a thread-safe OutputStream, at a slight performance penalty.

For performance reasons, this library provides non-thread-safe streams by default. Use the locking functions to convert these streams into slightly slower, but thread-safe, equivalents.

Utility streams

nullInput :: IO (InputStream a)

An empty InputStream that yields Nothing immediately.

nullOutput :: IO (OutputStream a)

An empty OutputStream that discards any input fed to it.

Generator monad

The Generator monad makes it easier for you to define more complicated InputStreams. Generators have a couple of basic features:

Generator is a MonadIO, so you can run IO actions from within it using liftIO:

 foo :: Generator r a
 foo = liftIO fireTheMissiles

Generator has a yield function:

 yield :: r -> Generator r ()

A call to "yield x" causes "Just x" to appear when reading the InputStream. Finally, Generator comes with a function to turn a Generator into an InputStream:

 fromGenerator :: Generator r a -> IO (InputStream r)

Once the Generator action finishes, fromGenerator will cause an end-of-stream Nothing marker to appear at the output. Example:

 ghci> (Streams.fromGenerator $ sequence $ map Streams.yield [1..5::Int]) >>= Streams.toList
 [1,2,3,4,5]

data Generator r a

A Generator is a coroutine monad that can be used to define complex InputStreams. You can cause a value of type Just r to appear when the InputStream is read by calling yield:

 g :: Generator Int ()
 g = do
     Streams.yield 1
     Streams.yield 2
     Streams.yield 3

A Generator can be turned into an InputStream by calling fromGenerator:

 m :: IO [Int]
 m = Streams.fromGenerator g >>= Streams.toList     -- value returned is [1,2,3]

You can perform IO by calling liftIO, and turn a Generator into an InputStream with fromGenerator.

As a general rule, you should not acquire resources that need to be freed from a Generator, because there is no guarantee the coroutine continuation will ever be called, nor can you catch an exception from within a Generator.

Instances

Typeable2 Generator

Monad (Generator r)

Functor (Generator r)

Applicative (Generator r)

MonadIO (Generator r)

fromGenerator :: Generator r a -> IO (InputStream r)

Turns a Generator into an InputStream.

yield :: r -> Generator r ()

Calling yield x causes the value Just x to appear on the input when this generator is converted to an InputStream. The rest of the computation after the call to yield is resumed later when the InputStream is read again.

Batteries included

module System.IO.Streams.Builder

module System.IO.Streams.ByteString

module System.IO.Streams.Combinators

module System.IO.Streams.Handle

module System.IO.Streams.File

module System.IO.Streams.List

module System.IO.Streams.Network

module System.IO.Streams.Process

module System.IO.Streams.Text

module System.IO.Streams.Vector

module System.IO.Streams.Zlib