-- |
-- Module      :  Text.Megaparsec
-- Copyright   :  © 2015–present Megaparsec contributors
--                © 2007 Paolo Martini
--                © 1999–2001 Daan Leijen
-- License     :  FreeBSD
--
-- Maintainer  :  Mark Karpov <markkarpov92@gmail.com>
-- Stability   :  experimental
-- Portability :  portable
--
-- This module includes everything you need to get started writing a parser.
-- If you are new to Megaparsec and don't know where to begin, take a look
-- at the tutorials
-- <https://markkarpov.com/learn-haskell.html#megaparsec-tutorials>.
--
-- In addition to the "Text.Megaparsec" module, which exports and re-exports
-- most everything that you may need, we advise to import
-- "Text.Megaparsec.Char" if you plan to work with a stream of 'Char' tokens
-- or "Text.Megaparsec.Byte" if you intend to parse binary data.
--
-- It is common to start working with the library by defining a type synonym
-- like this:
--
-- > type Parser = Parsec Void Text
-- >                      ^    ^
-- >                      |    |
-- > Custom error component    Input stream type
--
-- Then you can write type signatures like @Parser 'Int'@—for a parser that
-- returns an 'Int' for example.
--
-- Similarly (since it's known to cause confusion), you should use
-- 'ParseErrorBundle' type parametrized like this:
--
-- > ParseErrorBundle Text Void
-- >                  ^    ^
-- >                  |    |
-- >  Input stream type    Custom error component (the same you used in Parser)
--
-- Megaparsec uses some type-level machinery to provide flexibility without
-- compromising on type safety. Thus type signatures are sometimes necessary
-- to avoid ambiguous types. If you're seeing an error message that reads
-- like “Type variable @e0@ is ambiguous …”, you need to give an explicit
-- signature to your parser to resolve the ambiguity. It's a good idea to
-- provide type signatures for all top-level definitions.

{-# LANGUAGE FlexibleContexts      #-}
{-# LANGUAGE FlexibleInstances     #-}
{-# LANGUAGE MultiParamTypeClasses #-}
{-# LANGUAGE RankNTypes            #-}
{-# LANGUAGE ScopedTypeVariables   #-}
{-# LANGUAGE TypeFamilies          #-}
{-# LANGUAGE UndecidableInstances  #-}

module Text.Megaparsec
  ( -- * Re-exports
    -- $reexports
    module Text.Megaparsec.Pos
  , module Text.Megaparsec.Error
  , module Text.Megaparsec.Stream
  , module Control.Monad.Combinators
    -- * Data types
  , State (..)
  , PosState (..)
  , Parsec
  , ParsecT
    -- * Running parser
  , parse
  , parseMaybe
  , parseTest
  , runParser
  , runParser'
  , runParserT
  , runParserT'
    -- * Primitive combinators
  , MonadParsec (..)
    -- * Signaling parse errors
    -- $parse-errors
  , failure
  , fancyFailure
  , unexpected
  , customFailure
  , region
  , registerParseError
  , registerFailure
  , registerFancyFailure
    -- * Derivatives of primitive combinators
  , single
  , satisfy
  , anySingle
  , anySingleBut
  , oneOf
  , noneOf
  , chunk
  , (<?>)
  , match
  , takeRest
  , atEnd
    -- * Parser state combinators
  , getInput
  , setInput
  , getSourcePos
  , getOffset
  , setOffset
  , setParserState )
where

import Control.Monad.Combinators
import Control.Monad.Identity
import Data.List.NonEmpty (NonEmpty (..))
import Data.Maybe (fromJust)
import Data.Set (Set)
import Text.Megaparsec.Class
import Text.Megaparsec.Error
import Text.Megaparsec.Internal
import Text.Megaparsec.Pos
import Text.Megaparsec.State
import Text.Megaparsec.Stream
import qualified Data.List.NonEmpty as NE
import qualified Data.Set as E

-- $reexports
--
-- Note that we re-export monadic combinators from
-- "Control.Monad.Combinators" because these are more efficient than
-- 'Applicative'-based ones. Thus 'many' and 'some' may clash with the
-- functions from "Control.Applicative". You need to hide the functions like
-- this:
--
-- > import Control.Applicative hiding (many, some)
--
-- Also note that you can import "Control.Monad.Combinators.NonEmpty" if you
-- wish that combinators like 'some' return 'NonEmpty' lists. The module
-- lives in the @parser-combinators@ package (you need at least version
-- /0.4.0/).
--
-- This module is intended to be imported qualified:
--
-- > import qualified Control.Monad.Combinators.NonEmpty as NE
--
-- Other modules of interest are:
--
--     * "Control.Monad.Combinators.Expr" for parsing of expressions.
--     * "Control.Applicative.Permutations" for parsing of permutations
--       phrases.

----------------------------------------------------------------------------
-- Data types

-- | 'Parsec' is a non-transformer variant of the more general 'ParsecT'
-- monad transformer.

type Parsec e s = ParsecT e s Identity

----------------------------------------------------------------------------
-- Running a parser

-- | @'parse' p file input@ runs parser @p@ over 'Identity' (see
-- 'runParserT' if you're using the 'ParsecT' monad transformer; 'parse'
-- itself is just a synonym for 'runParser'). It returns either a
-- 'ParseErrorBundle' ('Left') or a value of type @a@ ('Right').
-- 'errorBundlePretty' can be used to turn 'ParseErrorBundle' into the
-- string representation of the error message. See "Text.Megaparsec.Error"
-- if you need to do more advanced error analysis.
--
-- > main = case parse numbers "" "11,2,43" of
-- >          Left bundle -> putStr (errorBundlePretty bundle)
-- >          Right xs -> print (sum xs)
-- >
-- > numbers = decimal `sepBy` char ','

parse
  :: Parsec e s a -- ^ Parser to run
  -> String       -- ^ Name of source file
  -> s            -- ^ Input for parser
  -> Either (ParseErrorBundle s e) a
parse = runParser

-- | @'parseMaybe' p input@ runs the parser @p@ on @input@ and returns the
-- result inside 'Just' on success and 'Nothing' on failure. This function
-- also parses 'eof', so if the parser doesn't consume all of its input, it
-- will fail.
--
-- The function is supposed to be useful for lightweight parsing, where
-- error messages (and thus file names) are not important and entire input
-- should be parsed. For example, it can be used when parsing of a single
-- number according to a specification of its format is desired.

parseMaybe :: (Ord e, Stream s) => Parsec e s a -> s -> Maybe a
parseMaybe p s =
  case parse (p <* eof) "" s of
    Left  _ -> Nothing
    Right x -> Just x

-- | The expression @'parseTest' p input@ applies the parser @p@ against the
-- input @input@ and prints the result to stdout. Useful for testing.

parseTest :: ( ShowErrorComponent e
             , Show a
             , Stream s
             )
  => Parsec e s a -- ^ Parser to run
  -> s            -- ^ Input for parser
  -> IO ()
parseTest p input =
  case parse p "" input of
    Left  e -> putStr (errorBundlePretty e)
    Right x -> print x

-- | @'runParser' p file input@ runs parser @p@ on the input stream of
-- tokens @input@, obtained from source @file@. The @file@ is only used in
-- error messages and may be the empty string. Returns either a
-- 'ParseErrorBundle' ('Left') or a value of type @a@ ('Right').
--
-- > parseFromFile p file = runParser p file <$> readFile file

runParser
  :: Parsec e s a -- ^ Parser to run
  -> String     -- ^ Name of source file
  -> s          -- ^ Input for parser
  -> Either (ParseErrorBundle s e) a
runParser p name s = snd $ runParser' p (initialState name s)

-- | The function is similar to 'runParser' with the difference that it
-- accepts and returns parser state. This allows to specify arbitrary
-- textual position at the beginning of parsing, for example. This is the
-- most general way to run a parser over the 'Identity' monad.
--
-- @since 4.2.0

runParser'
  :: Parsec e s a -- ^ Parser to run
  -> State s e    -- ^ Initial state
  -> (State s e, Either (ParseErrorBundle s e) a)
runParser' p = runIdentity . runParserT' p

-- | @'runParserT' p file input@ runs parser @p@ on the input list of tokens
-- @input@, obtained from source @file@. The @file@ is only used in error
-- messages and may be the empty string. Returns a computation in the
-- underlying monad @m@ that returns either a 'ParseErrorBundle' ('Left') or
-- a value of type @a@ ('Right').

runParserT :: Monad m
  => ParsecT e s m a -- ^ Parser to run
  -> String        -- ^ Name of source file
  -> s             -- ^ Input for parser
  -> m (Either (ParseErrorBundle s e) a)
runParserT p name s = snd <$> runParserT' p (initialState name s)

-- | This function is similar to 'runParserT', but like 'runParser'' it
-- accepts and returns parser state. This is thus the most general way to
-- run a parser.
--
-- @since 4.2.0

runParserT' :: Monad m
  => ParsecT e s m a -- ^ Parser to run
  -> State s e     -- ^ Initial state
  -> m (State s e, Either (ParseErrorBundle s e) a)
runParserT' p s = do
  (Reply s' _ result) <- runParsecT p s
  let toBundle es = ParseErrorBundle
        { bundleErrors =
            NE.sortWith errorOffset es
        , bundlePosState = statePosState s
        }
  return $ case result of
    OK x ->
      case NE.nonEmpty (stateParseErrors s') of
        Nothing -> (s', Right x)
        Just de -> (s', Left (toBundle de))
    Error e ->
      (s', Left (toBundle (e :| stateParseErrors s')))

-- | Given name of source file and input construct initial state for parser.

initialState :: String -> s -> State s e
initialState name s = State
  { stateInput  = s
  , stateOffset = 0
  , statePosState = PosState
    { pstateInput = s
    , pstateOffset = 0
    , pstateSourcePos = initialPos name
    , pstateTabWidth = defaultTabWidth
    , pstateLinePrefix = ""
    }
  , stateParseErrors = []
  }

----------------------------------------------------------------------------
-- Signaling parse errors

-- $parse-errors
--
-- The most general function to fail and end parsing is 'parseError'. These
-- are built on top of it. The section also includes functions starting with
-- the @register@ prefix which allow users to register “delayed”
-- 'ParseError's.

-- | Stop parsing and report a trivial 'ParseError'.
--
-- @since 6.0.0

failure
  :: MonadParsec e s m
  => Maybe (ErrorItem (Token s)) -- ^ Unexpected item (if any)
  -> Set (ErrorItem (Token s)) -- ^ Expected items
  -> m a
failure us ps = do
  o <- getOffset
  parseError (TrivialError o us ps)
{-# INLINE failure #-}

-- | Stop parsing and report a fancy 'ParseError'. To report a single custom
-- parse error, see 'Text.Megaparsec.customFailure'.
--
-- @since 6.0.0

fancyFailure
  :: MonadParsec e s m
  => Set (ErrorFancy e) -- ^ Fancy error components
  -> m a
fancyFailure xs = do
  o <- getOffset
  parseError (FancyError o xs)
{-# INLINE fancyFailure #-}

-- | The parser @'unexpected' item@ fails with an error message telling
-- about unexpected item @item@ without consuming any input.
--
-- > unexpected item = failure (Just item) Set.empty

unexpected :: MonadParsec e s m => ErrorItem (Token s) -> m a
unexpected item = failure (Just item) E.empty
{-# INLINE unexpected #-}

-- | Report a custom parse error. For a more general version, see
-- 'fancyFailure'.
--
-- > customFailure = fancyFailure . Set.singleton . ErrorCustom
--
-- @since 6.3.0

customFailure :: MonadParsec e s m => e -> m a
customFailure = fancyFailure . E.singleton . ErrorCustom
{-# INLINE customFailure #-}

-- | Specify how to process 'ParseError's that happen inside of this
-- wrapper. This applies to both normal and delayed 'ParseError's.
--
-- As a side-effect of the implementation the inner computation will start
-- with empty collection of delayed errors and they will be updated and
-- “restored” on the way out of 'region'.
--
-- @since 5.3.0

region :: MonadParsec e s m
  => (ParseError s e -> ParseError s e)
     -- ^ How to process 'ParseError's
  -> m a               -- ^ The “region” that the processing applies to
  -> m a
region f m = do
  deSoFar <- stateParseErrors <$> getParserState
  updateParserState $ \s ->
    s { stateParseErrors = [] }
  r <- observing m
  updateParserState $ \s ->
    s { stateParseErrors = (f <$> stateParseErrors s) ++ deSoFar }
  case r of
    Left err -> parseError (f err)
    Right x -> return x
{-# INLINEABLE region #-}

-- | Register a 'ParseError' for later reporting. This action does not end
-- parsing and has no effect except for adding the given 'ParseError' to the
-- collection of “delayed” 'ParseError's which will be taken into
-- consideration at the end of parsing. Only if this collection is empty
-- parser will succeed. This is the main way to report several parse errors
-- at once.
--
-- @since 8.0.0

registerParseError :: MonadParsec e s m => ParseError s e -> m ()
registerParseError e = updateParserState $ \s ->
  s { stateParseErrors = e : stateParseErrors s }
{-# INLINE registerParseError #-}

-- | Like 'failure', but for delayed 'ParseError's.
--
-- @since 8.0.0

registerFailure
  :: MonadParsec e s m
  => Maybe (ErrorItem (Token s)) -- ^ Unexpected item (if any)
  -> Set (ErrorItem (Token s)) -- ^ Expected items
  -> m ()
registerFailure us ps = do
  o <- getOffset
  registerParseError (TrivialError o us ps)
{-# INLINE registerFailure #-}

-- | Like 'fancyFailure', but for delayed 'ParseError's.
--
-- @since 8.0.0

registerFancyFailure
  :: MonadParsec e s m
  => Set (ErrorFancy e) -- ^ Fancy error components
  -> m ()
registerFancyFailure xs = do
  o <- getOffset
  registerParseError (FancyError o xs)
{-# INLINE registerFancyFailure #-}

----------------------------------------------------------------------------
-- Derivatives of primitive combinators

-- | @'single' t@ only matches the single token @t@.
--
-- > semicolon = single ';'
--
-- See also: 'token', 'anySingle', 'Text.Megaparsec.Byte.char',
-- 'Text.Megaparsec.Char.char'.
--
-- @since 7.0.0

single :: MonadParsec e s m
  => Token s           -- ^ Token to match
  -> m (Token s)
single t = token testToken expected
  where
    testToken x = if x == t then Just x else Nothing
    expected    = E.singleton (Tokens (t:|[]))
{-# INLINE single #-}

-- | The parser @'satisfy' f@ succeeds for any token for which the supplied
-- function @f@ returns 'True'.
--
-- > digitChar = satisfy isDigit <?> "digit"
-- > oneOf cs  = satisfy (`elem` cs)
--
-- See also: 'anySingle', 'anySingleBut', 'oneOf', 'noneOf'.
--
-- @since 7.0.0

satisfy :: MonadParsec e s m
  => (Token s -> Bool) -- ^ Predicate to apply
  -> m (Token s)
satisfy f = token testChar E.empty
  where
    testChar x = if f x then Just x else Nothing
{-# INLINE satisfy #-}

-- | Parse and return a single token. It's a good idea to attach a 'label'
-- to this parser.
--
-- > anySingle = satisfy (const True)
--
-- See also: 'satisfy', 'anySingleBut'.
--
-- @since 7.0.0

anySingle :: MonadParsec e s m => m (Token s)
anySingle = satisfy (const True)
{-# INLINE anySingle #-}

-- | Match any token but the given one. It's a good idea to attach a 'label'
-- to this parser.
--
-- > anySingleBut t = satisfy (/= t)
--
-- See also: 'single', 'anySingle', 'satisfy'.
--
-- @since 7.0.0

anySingleBut :: MonadParsec e s m
  => Token s           -- ^ Token we should not match
  -> m (Token s)
anySingleBut t = satisfy (/= t)
{-# INLINE anySingleBut #-}

-- | @'oneOf' ts@ succeeds if the current token is in the supplied
-- collection of tokens @ts@. Returns the parsed token. Note that this
-- parser cannot automatically generate the “expected” component of error
-- message, so usually you should label it manually with 'label' or ('<?>').
--
-- > oneOf cs = satisfy (`elem` cs)
--
-- See also: 'satisfy'.
--
-- > digit = oneOf ['0'..'9'] <?> "digit"
--
-- __Performance note__: prefer 'satisfy' when you can because it's faster
-- when you have only a couple of tokens to compare to:
--
-- > quoteFast = satisfy (\x -> x == '\'' || x == '\"')
-- > quoteSlow = oneOf "'\""
--
-- @since 7.0.0

oneOf :: (Foldable f, MonadParsec e s m)
  => f (Token s)       -- ^ Collection of matching tokens
  -> m (Token s)
oneOf cs = satisfy (`elem` cs)
{-# INLINE oneOf #-}

-- | As the dual of 'oneOf', @'noneOf' ts@ succeeds if the current token
-- /not/ in the supplied list of tokens @ts@. Returns the parsed character.
-- Note that this parser cannot automatically generate the “expected”
-- component of error message, so usually you should label it manually with
-- 'label' or ('<?>').
--
-- > noneOf cs = satisfy (`notElem` cs)
--
-- See also: 'satisfy'.
--
-- __Performance note__: prefer 'satisfy' and 'anySingleBut' when you can
-- because it's faster.
--
-- @since 7.0.0

noneOf :: (Foldable f, MonadParsec e s m)
  => f (Token s)       -- ^ Collection of taken we should not match
  -> m (Token s)
noneOf cs = satisfy (`notElem` cs)
{-# INLINE noneOf #-}

-- | @'chunk' chk@ only matches the chunk @chk@.
--
-- > divOrMod = chunk "div" <|> chunk "mod"
--
-- See also: 'tokens', 'Text.Megaparsec.Char.string',
-- 'Text.Megaparsec.Byte.string'.
--
-- @since 7.0.0

chunk :: MonadParsec e s m
  => Tokens s          -- ^ Chunk to match
  -> m (Tokens s)
chunk = tokens (==)
{-# INLINE chunk #-}

-- | A synonym for 'label' in the form of an operator.

infix 0 <?>

(<?>) :: MonadParsec e s m => m a -> String -> m a
(<?>) = flip label
{-# INLINE (<?>) #-}

-- | Return both the result of a parse and a chunk of input that was
-- consumed during parsing. This relies on the change of the 'stateOffset'
-- value to evaluate how many tokens were consumed. If you mess with it
-- manually in the argument parser, prepare for troubles.
--
-- @since 5.3.0

match :: MonadParsec e s m => m a -> m (Tokens s, a)
match p = do
  o  <- getOffset
  s  <- getInput
  r  <- p
  o' <- getOffset
  -- NOTE The 'fromJust' call here should never fail because if the stream
  -- is empty before 'p' (the only case when 'takeN_' can return 'Nothing'
  -- as per its invariants), (tp' - tp) won't be greater than 0, and in that
  -- case 'Just' is guaranteed to be returned as per another invariant of
  -- 'takeN_'.
  return ((fst . fromJust) (takeN_ (o' - o) s), r)
{-# INLINEABLE match #-}

-- | Consume the rest of the input and return it as a chunk. This parser
-- never fails, but may return the empty chunk.
--
-- > takeRest = takeWhileP Nothing (const True)
--
-- @since 6.0.0

takeRest :: MonadParsec e s m => m (Tokens s)
takeRest = takeWhileP Nothing (const True)
{-# INLINE takeRest #-}

-- | Return 'True' when end of input has been reached.
--
-- > atEnd = option False (True <$ hidden eof)
--
-- @since 6.0.0

atEnd :: MonadParsec e s m => m Bool
atEnd = option False (True <$ hidden eof)
{-# INLINE atEnd #-}

----------------------------------------------------------------------------
-- Parser state combinators

-- | Return the current input.

getInput :: MonadParsec e s m => m s
getInput = stateInput <$> getParserState
{-# INLINE getInput #-}

-- | @'setInput' input@ continues parsing with @input@.

setInput :: MonadParsec e s m => s -> m ()
setInput s = updateParserState (\(State _ o pst de) -> State s o pst de)
{-# INLINE setInput #-}

-- | Return the current source position. This function /is not cheap/, do
-- not call it e.g. on matching of every token, that's a bad idea. Still you
-- can use it to get 'SourcePos' to attach to things that you parse.
--
-- The function works under the assumption that we move in the input stream
-- only forwards and never backwards, which is always true unless the user
-- abuses the library.
--
-- @since 7.0.0

getSourcePos :: MonadParsec e s m => m SourcePos
getSourcePos = do
  st <- getParserState
  let pst = reachOffsetNoLine (stateOffset st) (statePosState st)
  setParserState st { statePosState = pst }
  return (pstateSourcePos pst)
{-# INLINE getSourcePos #-}

-- | Get the number of tokens processed so far.
--
-- See also: 'setOffset'.
--
-- @since 7.0.0

getOffset :: MonadParsec e s m => m Int
getOffset = stateOffset <$> getParserState
{-# INLINE getOffset #-}

-- | Set the number of tokens processed so far.
--
-- See also: 'getOffset'.
--
-- @since 7.0.0

setOffset :: MonadParsec e s m => Int -> m ()
setOffset o = updateParserState $ \(State s _ pst de) ->
  State s o pst de
{-# INLINE setOffset #-}

-- | @'setParserState' st@ sets the parser state to @st@.
--
-- See also: 'getParserState', 'updateParserState'.

setParserState :: MonadParsec e s m => State s e -> m ()
setParserState st = updateParserState (const st)
{-# INLINE setParserState #-}