Data.Primitive.ByteArray

Primitive operations on byte arrays. Most functions in this module include an element type in their type signature and interpret the unit for offsets and lengths as that element. A few functions (e.g. copyByteArray, freezeByteArray) do not include an element type. Such functions interpret offsets and lengths as units of 8-bit words.

Types

data ByteArray

Byte arrays

Constructors

ByteArray ByteArray#

Instances

IsList ByteArray

Since: 0.6.3.0

Defined in Data.Primitive.ByteArray

Associated Types

type Item ByteArray :: Type

Methods

fromList :: [Item ByteArray] -> ByteArray

fromListN :: Int -> [Item ByteArray] -> ByteArray

toList :: ByteArray -> [Item ByteArray]

Eq ByteArray

Since: 0.6.3.0

Defined in Data.Primitive.ByteArray

Methods

(==) :: ByteArray -> ByteArray -> Bool

(/=) :: ByteArray -> ByteArray -> Bool

Data ByteArray

Defined in Data.Primitive.ByteArray

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> ByteArray -> c ByteArray

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c ByteArray

toConstr :: ByteArray -> Constr

dataTypeOf :: ByteArray -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c ByteArray)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c ByteArray)

gmapT :: (forall b. Data b => b -> b) -> ByteArray -> ByteArray

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> ByteArray -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> ByteArray -> r

gmapQ :: (forall d. Data d => d -> u) -> ByteArray -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> ByteArray -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> ByteArray -> m ByteArray

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> ByteArray -> m ByteArray

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> ByteArray -> m ByteArray

Ord ByteArray

Non-lexicographic ordering. This compares the lengths of the byte arrays first and uses a lexicographic ordering if the lengths are equal. Subject to change between major versions.

Since: 0.6.3.0

Defined in Data.Primitive.ByteArray

Methods

compare :: ByteArray -> ByteArray -> Ordering

(<) :: ByteArray -> ByteArray -> Bool

(<=) :: ByteArray -> ByteArray -> Bool

(>) :: ByteArray -> ByteArray -> Bool

(>=) :: ByteArray -> ByteArray -> Bool

max :: ByteArray -> ByteArray -> ByteArray

min :: ByteArray -> ByteArray -> ByteArray

Show ByteArray

Since: 0.6.3.0

Defined in Data.Primitive.ByteArray

Methods

showsPrec :: Int -> ByteArray -> ShowS

show :: ByteArray -> String

showList :: [ByteArray] -> ShowS

Semigroup ByteArray

Defined in Data.Primitive.ByteArray

Methods

(<>) :: ByteArray -> ByteArray -> ByteArray

sconcat :: NonEmpty ByteArray -> ByteArray

stimes :: Integral b => b -> ByteArray -> ByteArray

Monoid ByteArray

Defined in Data.Primitive.ByteArray

Methods

mempty :: ByteArray

mappend :: ByteArray -> ByteArray -> ByteArray

mconcat :: [ByteArray] -> ByteArray

NFData ByteArray

Defined in Data.Primitive.ByteArray

Methods

rnf :: ByteArray -> ()

type Item ByteArray

Defined in Data.Primitive.ByteArray

type Item ByteArray = Word8

data MutableByteArray s

Mutable byte arrays associated with a primitive state token

Constructors

MutableByteArray (MutableByteArray# s)

Instances

Eq (MutableByteArray s)

Defined in Data.Primitive.ByteArray

Methods

(==) :: MutableByteArray s -> MutableByteArray s -> Bool

(/=) :: MutableByteArray s -> MutableByteArray s -> Bool

Typeable s => Data (MutableByteArray s)

Defined in Data.Primitive.ByteArray

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> MutableByteArray s -> c (MutableByteArray s)

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c (MutableByteArray s)

toConstr :: MutableByteArray s -> Constr

dataTypeOf :: MutableByteArray s -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c (MutableByteArray s))

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c (MutableByteArray s))

gmapT :: (forall b. Data b => b -> b) -> MutableByteArray s -> MutableByteArray s

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> MutableByteArray s -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> MutableByteArray s -> r

gmapQ :: (forall d. Data d => d -> u) -> MutableByteArray s -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> MutableByteArray s -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> MutableByteArray s -> m (MutableByteArray s)

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> MutableByteArray s -> m (MutableByteArray s)

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> MutableByteArray s -> m (MutableByteArray s)

NFData (MutableByteArray s)

Defined in Data.Primitive.ByteArray

Methods

rnf :: MutableByteArray s -> ()

data ByteArray# :: TYPE UnliftedRep

data MutableByteArray# (a :: Type) :: Type -> TYPE UnliftedRep

Allocation

newByteArray :: PrimMonad m => Int -> m (MutableByteArray (PrimState m))

Create a new mutable byte array of the specified size in bytes.

Note: this function does not check if the input is non-negative.

newPinnedByteArray :: PrimMonad m => Int -> m (MutableByteArray (PrimState m))

Create a pinned byte array of the specified size in bytes. The garbage collector is guaranteed not to move it.

Note: this function does not check if the input is non-negative.

newAlignedPinnedByteArray

Arguments

:: PrimMonad m

=> Int

size

-> Int

alignment

-> m (MutableByteArray (PrimState m))

Create a pinned byte array of the specified size in bytes and with the given alignment. The garbage collector is guaranteed not to move it.

Note: this function does not check if the input is non-negative.

resizeMutableByteArray :: PrimMonad m => MutableByteArray (PrimState m) -> Int -> m (MutableByteArray (PrimState m))

Resize a mutable byte array. The new size is given in bytes.

This will either resize the array in-place or, if not possible, allocate the contents into a new, unpinned array and copy the original array's contents.

To avoid undefined behaviour, the original MutableByteArray shall not be accessed anymore after a resizeMutableByteArray has been performed. Moreover, no reference to the old one should be kept in order to allow garbage collection of the original MutableByteArray in case a new MutableByteArray had to be allocated.

Since: 0.6.4.0

shrinkMutableByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

-> Int

new size

-> m ()

Shrink a mutable byte array. The new size is given in bytes. It must be smaller than the old size. The array will be resized in place. This function is only available when compiling with GHC 7.10 or newer.

Since: 0.7.1.0

Element access

readByteArray :: (Prim a, PrimMonad m) => MutableByteArray (PrimState m) -> Int -> m a

Read a primitive value from the byte array. The offset is given in elements of type a rather than in bytes.

Note: this function does not do bounds checking.

writeByteArray :: (Prim a, PrimMonad m) => MutableByteArray (PrimState m) -> Int -> a -> m ()

Write a primitive value to the byte array. The offset is given in elements of type a rather than in bytes.

Note: this function does not do bounds checking.

indexByteArray :: Prim a => ByteArray -> Int -> a

Read a primitive value from the byte array. The offset is given in elements of type a rather than in bytes.

Note: this function does not do bounds checking.

Constructing

byteArrayFromList :: Prim a => [a] -> ByteArray

Create a ByteArray from a list.

byteArrayFromList xs = byteArrayFromListN (length xs) xs

byteArrayFromListN :: Prim a => Int -> [a] -> ByteArray

Create a ByteArray from a list of a known length. If the length of the list does not match the given length, this throws an exception.

Folding

foldrByteArray :: forall a b. Prim a => (a -> b -> b) -> b -> ByteArray -> b

Right-fold over the elements of a ByteArray.

Comparing

compareByteArrays

Arguments

:: ByteArray

Array A

-> Int

Offset A, given in bytes

-> ByteArray

Array B

-> Int

Offset B, given in bytes

-> Int

Length of slice, given in bytes

-> Ordering

Lexicographic comparison of equal-length slices into two byte arrays. This wraps the compareByteArrays# primop, which wraps memcmp.

Freezing and thawing

freezeByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

source

-> Int

offset in bytes

-> Int

length in bytes

-> m ByteArray

Create an immutable copy of a slice of a byte array. The offset and length are given in bytes.

This operation makes a copy of the specified section, so it is safe to continue using the mutable array afterward.

unsafeFreezeByteArray :: PrimMonad m => MutableByteArray (PrimState m) -> m ByteArray

Convert a mutable byte array to an immutable one without copying. The array should not be modified after the conversion.

unsafeThawByteArray :: PrimMonad m => ByteArray -> m (MutableByteArray (PrimState m))

Convert an immutable byte array to a mutable one without copying. The original array should not be used after the conversion.

Block operations

copyByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

destination array

-> Int

offset into destination array

-> ByteArray

source array

-> Int

offset into source array

-> Int

number of bytes to copy

-> m ()

Copy a slice of an immutable byte array to a mutable byte array.

Note: this function does not do bounds or overlap checking.

copyMutableByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

destination array

-> Int

offset into destination array

-> MutableByteArray (PrimState m)

source array

-> Int

offset into source array

-> Int

number of bytes to copy

-> m ()

Copy a slice of a mutable byte array into another array. The two slices may not overlap.

Note: this function does not do bounds or overlap checking.

copyByteArrayToPtr

Arguments

:: (PrimMonad m, Prim a)

=> Ptr a

destination

-> ByteArray

source array

-> Int

offset into source array, interpreted as elements of type a

-> Int

number of elements to copy

-> m ()

Copy a slice of a byte array to an unmanaged Pointer Address. These must not overlap. The offset and length given in elements, not in bytes. This function is only available when compiling with GHC 7.8 or newer.

Note: this function does not do bounds or overlap checking.

Since: 0.7.1.0

copyMutableByteArrayToPtr

Arguments

:: (PrimMonad m, Prim a)

=> Ptr a

destination

-> MutableByteArray (PrimState m)

source array

-> Int

offset into source array, interpreted as elements of type a

-> Int

number of elements to copy

-> m ()

Copy a slice of a mutable byte array to an unmanaged Pointer address. These must not overlap. The offset and length given in elements, not in bytes. This function is only available when compiling with GHC 7.8 or newer.

Note: this function does not do bounds or overlap checking.

Since: 0.7.1.0

copyByteArrayToAddr

Arguments

:: PrimMonad m

=> Ptr Word8

destination

-> ByteArray

source array

-> Int

offset into source array

-> Int

number of bytes to copy

-> m ()

Copy a slice of a byte array to an unmanaged address. These must not overlap. This function is only available when compiling with GHC 7.8 or newer.

Note: This function is just copyByteArrayToPtr where a is Word8.

Since: 0.6.4.0

copyMutableByteArrayToAddr

Arguments

:: PrimMonad m

=> Ptr Word8

destination

-> MutableByteArray (PrimState m)

source array

-> Int

offset into source array

-> Int

number of bytes to copy

-> m ()

Copy a slice of a mutable byte array to an unmanaged address. These must not overlap. This function is only available when compiling with GHC 7.8 or newer.

Note: This function is just copyMutableByteArrayToPtr where a is Word8.

Since: 0.6.4.0

moveByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

destination array

-> Int

offset into destination array

-> MutableByteArray (PrimState m)

source array

-> Int

offset into source array

-> Int

number of bytes to copy

-> m ()

Copy a slice of a mutable byte array into another, potentially overlapping array.

setByteArray

Arguments

:: (Prim a, PrimMonad m)

=> MutableByteArray (PrimState m)

array to fill

-> Int

offset into array

-> Int

number of values to fill

-> a

value to fill with

-> m ()

Fill a slice of a mutable byte array with a value. The offset and length are given in elements of type a rather than in bytes.

Note: this function does not do bounds checking.

fillByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

array to fill

-> Int

offset into array

-> Int

number of bytes to fill

-> Word8

byte to fill with

-> m ()

Fill a slice of a mutable byte array with a byte.

Note: this function does not do bounds checking.

cloneByteArray

Arguments

:: ByteArray

source array

-> Int

offset into destination array

-> Int

number of bytes to copy

-> ByteArray

Return a newly allocated array with the specified subrange of the provided array. The provided array should contain the full subrange specified by the two Ints, but this is not checked.

cloneMutableByteArray

Arguments

:: PrimMonad m

=> MutableByteArray (PrimState m)

source array

-> Int

offset into destination array

-> Int

number of bytes to copy

-> m (MutableByteArray (PrimState m))

Return a newly allocated mutable array with the specified subrange of the provided mutable array. The provided mutable array should contain the full subrange specified by the two Ints, but this is not checked.

Information

sizeofByteArray :: ByteArray -> Int

Size of the byte array in bytes.

sizeofMutableByteArray :: MutableByteArray s -> Int

Size of the mutable byte array in bytes. This function's behavior is undefined if resizeMutableByteArray is ever called on the mutable byte array given as the argument. Consequently, use of this function is discouraged. Prefer getSizeofMutableByteArray, which ensures correct sequencing in the presence of resizing.

getSizeofMutableByteArray :: PrimMonad m => MutableByteArray (PrimState m) -> m Int

Get the size of a byte array in bytes. Unlike sizeofMutableByteArray, this function ensures sequencing in the presence of resizing.

sameMutableByteArray :: MutableByteArray s -> MutableByteArray s -> Bool

Check if the two arrays refer to the same memory block.

isByteArrayPinned :: ByteArray -> Bool

Check whether or not the byte array is pinned. Pinned byte arrays cannot be moved by the garbage collector. It is safe to use byteArrayContents on such byte arrays. This function is only available when compiling with GHC 8.2 or newer.

Since: 0.6.4.0

isMutableByteArrayPinned :: MutableByteArray s -> Bool

Check whether or not the mutable byte array is pinned. This function is only available when compiling with GHC 8.2 or newer.

Since: 0.6.4.0

byteArrayContents :: ByteArray -> Ptr Word8

Yield a pointer to the array's data. This operation is only safe on pinned byte arrays allocated by newPinnedByteArray or newAlignedPinnedByteArray.

mutableByteArrayContents :: MutableByteArray s -> Ptr Word8

Yield a pointer to the array's data. This operation is only safe on pinned byte arrays allocated by newPinnedByteArray or newAlignedPinnedByteArray.