Sound.Tidal.Params

Documentation

grp :: [String -> ControlMap] -> Pattern String -> ControlPattern

group multiple params into one

mF :: String -> String -> ControlMap

mI :: String -> String -> ControlMap

mS :: String -> String -> ControlMap

sound :: Pattern String -> ControlPattern

Grouped params

s :: Pattern String -> ControlPattern

cc :: Pattern String -> ControlPattern

pF :: String -> Pattern Double -> ControlPattern

Singular params

pI :: String -> Pattern Int -> ControlPattern

pS :: String -> Pattern String -> ControlPattern

accelerate :: Pattern Double -> ControlPattern

a pattern of numbers that speed up (or slow down) samples while they play.

attack :: Pattern Double -> ControlPattern

a pattern of numbers to specify the attack time (in seconds) of an envelope applied to each sample. Only takes effect if release is also specified.

bandf :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the center frequency of the band-pass filter.

bandq :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the q-factor of the band-pass filter.y

begin :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Skips the beginning of each sample, e.g. `0.25` to cut off the first quarter from each sample.

Using `begin "-1"` combined with `cut "-1"` means that when the sample cuts itself it will begin playback from where the previous one left off, so it will sound like one seamless sample. This allows you to apply a synth param across a long sample in a way similar to chop:

cps 0.5

d1 $ sound "breaks125*8"  begin "-1"  coarse "1 2 4 8 16 32 64 128"

This will play the breaks125 sample and apply the changing coarse parameter over the sample. Compare to:

d1 $ (chop 8 $ sounds "breaks125")  coarse "1 2 4 8 16 32 64 128"

which performs a similar effect, but due to differences in implementation sounds different.

legato :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Skips the beginning of each sample, e.g. `0.25` to cut off the first quarter from each sample.

Using `begin "-1"` combined with `cut "-1"` means that when the sample cuts itself it will begin playback from where the previous one left off, so it will sound like one seamless sample. This allows you to apply a synth param across a long sample in a way similar to chop:

cps 0.5

d1 $ sound "breaks125*8"  begin "-1"  coarse "1 2 4 8 16 32 64 128"

This will play the breaks125 sample and apply the changing coarse parameter over the sample. Compare to:

d1 $ (chop 8 $ sounds "breaks125")  coarse "1 2 4 8 16 32 64 128"

which performs a similar effect, but due to differences in implementation sounds different.

clhatdecay :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Skips the beginning of each sample, e.g. `0.25` to cut off the first quarter from each sample.

Using `begin "-1"` combined with `cut "-1"` means that when the sample cuts itself it will begin playback from where the previous one left off, so it will sound like one seamless sample. This allows you to apply a synth param across a long sample in a way similar to chop:

cps 0.5

d1 $ sound "breaks125*8"  begin "-1"  coarse "1 2 4 8 16 32 64 128"

This will play the breaks125 sample and apply the changing coarse parameter over the sample. Compare to:

d1 $ (chop 8 $ sounds "breaks125")  coarse "1 2 4 8 16 32 64 128"

which performs a similar effect, but due to differences in implementation sounds different.

crush :: Pattern Double -> ControlPattern

bit crushing, a pattern of numbers from 1 (for drastic reduction in bit-depth) to 16 (for barely no reduction).

a pattern of numbers from 0 to 1. Skips the beginning of each sample, e.g. `0.25` to cut off the first quarter from each sample.

Using `begin "-1"` combined with `cut "-1"` means that when the sample cuts itself it will begin playback from where the previous one left off, so it will sound like one seamless sample. This allows you to apply a synth param across a long sample in a way similar to chop:

cps 0.5

d1 $ sound "breaks125*8"  begin "-1"  coarse "1 2 4 8 16 32 64 128"

This will play the breaks125 sample and apply the changing coarse parameter over the sample. Compare to:

d1 $ (chop 8 $ sounds "breaks125")  coarse "1 2 4 8 16 32 64 128"

which performs a similar effect, but due to differences in implementation sounds different.

channel :: Pattern Int -> ControlPattern

choose the physical channel the pattern is sent to, this is super dirt specific

coarse :: Pattern Int -> ControlPattern

fake-resampling, a pattern of numbers for lowering the sample rate, i.e. 1 for original 2 for half, 3 for a third and so on.

cut :: Pattern Int -> ControlPattern

In the style of classic drum-machines, cut will stop a playing sample as soon as another samples with in same cutgroup is to be played.

An example would be an open hi-hat followed by a closed one, essentially muting the open.

d1 $ stack [
  sound "bd",
  sound "~ [~ [ho:2 hc/2]]" # cut "1"
  ]

This will mute the open hi-hat every second cycle when the closed one is played.

Using cut with negative values will only cut the same sample. This is useful to cut very long samples

d1 $ sound "bev, [ho:3]" # cut "-1"

Using `cut "0"` is effectively _no_ cutgroup.

cutoff :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Applies the cutoff frequency of the low-pass filter.

cutoffegint :: Pattern Double -> ControlPattern

decay :: Pattern Double -> ControlPattern

delay :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the level of the delay signal.

delayfeedback :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the amount of delay feedback.

delaytime :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the length of the delay.

detune :: Pattern Double -> ControlPattern

dry :: Pattern Double -> ControlPattern

when set to `1` will disable all reverb for this pattern. See room and size for more information about reverb.

end :: Pattern Double -> ControlPattern

gain :: Pattern Double -> ControlPattern

a pattern of numbers that specify volume. Values less than 1 make the sound quieter. Values greater than 1 make the sound louder.

gate :: Pattern Double -> ControlPattern

hatgrain :: Pattern Double -> ControlPattern

hcutoff :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Applies the cutoff frequency of the high-pass filter.

hold :: Pattern Double -> ControlPattern

a pattern of numbers to specify the hold time (in seconds) of an envelope applied to each sample. Only takes effect if attack and release are also specified.

hresonance :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Applies the resonance of the high-pass filter.

kriole :: Pattern Int -> ControlPattern

lagogo :: Pattern Double -> ControlPattern

lclap :: Pattern Double -> ControlPattern

lclaves :: Pattern Double -> ControlPattern

lclhat :: Pattern Double -> ControlPattern

lcrash :: Pattern Double -> ControlPattern

leslie :: Pattern Double -> ControlPattern

lrate :: Pattern Double -> ControlPattern

lsize :: Pattern Double -> ControlPattern

lfo :: Pattern Double -> ControlPattern

lfocutoffint :: Pattern Double -> ControlPattern

lfodelay :: Pattern Double -> ControlPattern

lfoint :: Pattern Double -> ControlPattern

lfopitchint :: Pattern Double -> ControlPattern

lfoshape :: Pattern Double -> ControlPattern

lfosync :: Pattern Double -> ControlPattern

lhitom :: Pattern Double -> ControlPattern

lkick :: Pattern Double -> ControlPattern

llotom :: Pattern Double -> ControlPattern

lock :: Pattern Double -> ControlPattern

A pattern of numbers. Specifies whether delaytime is calculated relative to cps. When set to 1, delaytime is a direct multiple of a cycle.

loop :: Pattern Double -> ControlPattern

loops the sample (from begin to end) the specified number of times.

lophat :: Pattern Double -> ControlPattern

lsnare :: Pattern Double -> ControlPattern

n :: Pattern Double -> ControlPattern

specifies the sample or note number to be used

note :: Pattern Double -> ControlPattern

degree :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

mtranspose :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

ctranspose :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

harmonic :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

stepsPerOctave :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

octaveRatio :: Pattern Double -> ControlPattern

Pushes things forward (or backwards within built-in latency) in time. Allows for nice things like _swing_ feeling:

d1 $ stack [
 sound "bd bd/4",
 sound "hh(5,8)"
 ] # nudge "[0 0.04]*4"

• -pitch model

nudge :: Pattern Double -> ControlPattern

octave :: Pattern Int -> ControlPattern

offset :: Pattern Double -> ControlPattern

ophatdecay :: Pattern Double -> ControlPattern

orbit :: Pattern Int -> ControlPattern

a pattern of numbers. An orbit is a global parameter context for patterns. Patterns with the same orbit will share hardware output bus offset and global effects, e.g. reverb and delay. The maximum number of orbits is specified in the superdirt startup, numbers higher than maximum will wrap around.

pan :: Pattern Double -> ControlPattern

a pattern of numbers between 0 and 1, from left to right (assuming stereo), once round a circle (assuming multichannel)

panspan :: Pattern Double -> ControlPattern

a pattern of numbers between -inf and inf, which controls how much multichannel output is fanned out (negative is backwards ordering)

pansplay :: Pattern Double -> ControlPattern

a pattern of numbers between 0.0 and 1.0, which controls the multichannel spread range (multichannel only)

panwidth :: Pattern Double -> ControlPattern

a pattern of numbers between 0.0 and inf, which controls how much each channel is distributed over neighbours (multichannel only)

panorient :: Pattern Double -> ControlPattern

a pattern of numbers between -1.0 and 1.0, which controls the relative position of the centre pan in a pair of adjacent speakers (multichannel only)

pitch1 :: Pattern Double -> ControlPattern

pitch2 :: Pattern Double -> ControlPattern

pitch3 :: Pattern Double -> ControlPattern

portamento :: Pattern Double -> ControlPattern

release :: Pattern Double -> ControlPattern

a pattern of numbers to specify the release time (in seconds) of an envelope applied to each sample. Only takes effect if attack is also specified.

resonance :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Specifies the resonance of the low-pass filter.

room :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the level of reverb.

sagogo :: Pattern Double -> ControlPattern

sclap :: Pattern Double -> ControlPattern

sclaves :: Pattern Double -> ControlPattern

scrash :: Pattern Double -> ControlPattern

semitone :: Pattern Double -> ControlPattern

shape :: Pattern Double -> ControlPattern

wave shaping distortion, a pattern of numbers from 0 for no distortion up to 1 for loads of distortion.

size :: Pattern Double -> ControlPattern

a pattern of numbers from 0 to 1. Sets the perceptual size (reverb time) of the room to be used in reverb.

slide :: Pattern Double -> ControlPattern

speed :: Pattern Double -> ControlPattern

a pattern of numbers which changes the speed of sample playback, i.e. a cheap way of changing pitch. Negative values will play the sample backwards!

squiz :: Pattern Double -> ControlPattern

s' :: Pattern String -> ControlPattern

a pattern of strings. Selects the sample to be played.

stutterdepth :: Pattern Double -> ControlPattern

stuttertime :: Pattern Double -> ControlPattern

sustain :: Pattern Double -> ControlPattern

tomdecay :: Pattern Double -> ControlPattern

unit :: Pattern String -> ControlPattern

used in conjunction with speed, accepts values of "r" (rate, default behavior), "c" (cycles), or "s" (seconds). Using `unit "c"` means speed will be interpreted in units of cycles, e.g. `speed "1"` means samples will be stretched to fill a cycle. Using `unit "s"` means the playback speed will be adjusted so that the duration is the number of seconds specified by speed.

velocity :: Pattern Double -> ControlPattern

vcfegint :: Pattern Double -> ControlPattern

vcoegint :: Pattern Double -> ControlPattern

voice :: Pattern Double -> ControlPattern

vowel :: Pattern String -> ControlPattern

formant filter to make things sound like vowels, a pattern of either a, e, i, o or u. Use a rest (`~`) for no effect.

waveloss :: Pattern Double -> ControlPattern

dur :: Pattern Double -> ControlPattern

modwheel :: Pattern Double -> ControlPattern

expression :: Pattern Double -> ControlPattern

sustainpedal :: Pattern Double -> ControlPattern

tremolorate :: Pattern Double -> ControlPattern

tremolodepth :: Pattern Double -> ControlPattern

phaserrate :: Pattern Double -> ControlPattern

phaserdepth :: Pattern Double -> ControlPattern

fshift :: Pattern Double -> ControlPattern

fshiftphase :: Pattern Double -> ControlPattern

fshiftnote :: Pattern Double -> ControlPattern

triode :: Pattern Double -> ControlPattern

krush :: Pattern Double -> ControlPattern

kcutoff :: Pattern Double -> ControlPattern

octer :: Pattern Double -> ControlPattern

octersub :: Pattern Double -> ControlPattern

octersubsub :: Pattern Double -> ControlPattern

ring :: Pattern Double -> ControlPattern

ringf :: Pattern Double -> ControlPattern

ringdf :: Pattern Double -> ControlPattern

distort :: Pattern Double -> ControlPattern

att :: Pattern Double -> ControlPattern

bpf :: Pattern Double -> ControlPattern

bpq :: Pattern Double -> ControlPattern

chdecay :: Pattern Double -> ControlPattern

ctf :: Pattern Double -> ControlPattern

ctfg :: Pattern Double -> ControlPattern

delayfb :: Pattern Double -> ControlPattern

delayt :: Pattern Double -> ControlPattern

det :: Pattern Double -> ControlPattern

gat :: Pattern Double -> ControlPattern

hg :: Pattern Double -> ControlPattern

hpf :: Pattern Double -> ControlPattern

hpq :: Pattern Double -> ControlPattern

lag :: Pattern Double -> ControlPattern

lbd :: Pattern Double -> ControlPattern

lch :: Pattern Double -> ControlPattern

lcl :: Pattern Double -> ControlPattern

lcp :: Pattern Double -> ControlPattern

lcr :: Pattern Double -> ControlPattern

lfoc :: Pattern Double -> ControlPattern

lfoi :: Pattern Double -> ControlPattern

lfop :: Pattern Double -> ControlPattern

lht :: Pattern Double -> ControlPattern

llt :: Pattern Double -> ControlPattern

loh :: Pattern Double -> ControlPattern

lpf :: Pattern Double -> ControlPattern

lpq :: Pattern Double -> ControlPattern

lsn :: Pattern Double -> ControlPattern

ohdecay :: Pattern Double -> ControlPattern

phasdp :: Pattern Double -> ControlPattern

phasr :: Pattern Double -> ControlPattern

pit1 :: Pattern Double -> ControlPattern

pit2 :: Pattern Double -> ControlPattern

pit3 :: Pattern Double -> ControlPattern

por :: Pattern Double -> ControlPattern

rel :: Pattern Double -> ControlPattern

sz :: Pattern Double -> ControlPattern

sag :: Pattern Double -> ControlPattern

scl :: Pattern Double -> ControlPattern

scp :: Pattern Double -> ControlPattern

scr :: Pattern Double -> ControlPattern

sld :: Pattern Double -> ControlPattern

std :: Pattern Double -> ControlPattern

stt :: Pattern Double -> ControlPattern

sus :: Pattern Double -> ControlPattern

tdecay :: Pattern Double -> ControlPattern

tremdp :: Pattern Double -> ControlPattern

tremr :: Pattern Double -> ControlPattern

vcf :: Pattern Double -> ControlPattern

vco :: Pattern Double -> ControlPattern

voi :: Pattern Double -> ControlPattern

midinote :: Pattern Double -> ControlPattern

drum :: Pattern String -> ControlPattern

drumN :: Num a => String -> a

array :: Pattern Double -> ControlPattern

midichan :: Pattern Double -> ControlPattern

control :: Pattern Double -> ControlPattern

ccn :: Pattern Double -> ControlPattern

ccv :: Pattern Double -> ControlPattern

ctlNum :: Pattern Double -> ControlPattern

frameRate :: Pattern Double -> ControlPattern

frames :: Pattern Double -> ControlPattern

hours :: Pattern Double -> ControlPattern

midicmd :: Pattern String -> ControlPattern

command :: Pattern String -> ControlPattern

minutes :: Pattern Double -> ControlPattern

progNum :: Pattern Double -> ControlPattern

seconds :: Pattern Double -> ControlPattern

songPtr :: Pattern Double -> ControlPattern

uid :: Pattern Double -> ControlPattern

val :: Pattern Double -> ControlPattern

up :: Pattern Double -> ControlPattern

up is now an alias of note.

cps :: Pattern Double -> ControlPattern

button0 :: Pattern Double -> ControlPattern

button1 :: Pattern Double -> ControlPattern

button2 :: Pattern Double -> ControlPattern

button3 :: Pattern Double -> ControlPattern

button4 :: Pattern Double -> ControlPattern

button5 :: Pattern Double -> ControlPattern

button6 :: Pattern Double -> ControlPattern

button7 :: Pattern Double -> ControlPattern

button8 :: Pattern Double -> ControlPattern

button9 :: Pattern Double -> ControlPattern

button10 :: Pattern Double -> ControlPattern

button11 :: Pattern Double -> ControlPattern

button12 :: Pattern Double -> ControlPattern

button13 :: Pattern Double -> ControlPattern

button14 :: Pattern Double -> ControlPattern

button15 :: Pattern Double -> ControlPattern

button16 :: Pattern Double -> ControlPattern

button17 :: Pattern Double -> ControlPattern

button18 :: Pattern Double -> ControlPattern

button19 :: Pattern Double -> ControlPattern

button20 :: Pattern Double -> ControlPattern

button21 :: Pattern Double -> ControlPattern

button22 :: Pattern Double -> ControlPattern

button23 :: Pattern Double -> ControlPattern

button24 :: Pattern Double -> ControlPattern

button25 :: Pattern Double -> ControlPattern

button26 :: Pattern Double -> ControlPattern

button27 :: Pattern Double -> ControlPattern

button28 :: Pattern Double -> ControlPattern

button29 :: Pattern Double -> ControlPattern

button30 :: Pattern Double -> ControlPattern

button31 :: Pattern Double -> ControlPattern

slider0 :: Pattern Double -> ControlPattern

slider1 :: Pattern Double -> ControlPattern

slider2 :: Pattern Double -> ControlPattern

slider3 :: Pattern Double -> ControlPattern

slider4 :: Pattern Double -> ControlPattern

slider5 :: Pattern Double -> ControlPattern

slider6 :: Pattern Double -> ControlPattern

slider7 :: Pattern Double -> ControlPattern

slider8 :: Pattern Double -> ControlPattern

slider9 :: Pattern Double -> ControlPattern

slider10 :: Pattern Double -> ControlPattern

slider11 :: Pattern Double -> ControlPattern

slider12 :: Pattern Double -> ControlPattern

slider13 :: Pattern Double -> ControlPattern

slider14 :: Pattern Double -> ControlPattern

slider15 :: Pattern Double -> ControlPattern

slider16 :: Pattern Double -> ControlPattern

slider17 :: Pattern Double -> ControlPattern

slider18 :: Pattern Double -> ControlPattern

slider19 :: Pattern Double -> ControlPattern

slider20 :: Pattern Double -> ControlPattern

slider21 :: Pattern Double -> ControlPattern

slider22 :: Pattern Double -> ControlPattern

slider23 :: Pattern Double -> ControlPattern

slider24 :: Pattern Double -> ControlPattern

slider25 :: Pattern Double -> ControlPattern

slider26 :: Pattern Double -> ControlPattern

slider27 :: Pattern Double -> ControlPattern

slider28 :: Pattern Double -> ControlPattern

slider29 :: Pattern Double -> ControlPattern

slider30 :: Pattern Double -> ControlPattern

slider31 :: Pattern Double -> ControlPattern