| Safe Haskell | Safe |
|---|---|
| Language | Haskell2010 |
Data.Time.Format
Synopsis
- class FormatTime t
- formatTime :: FormatTime t => TimeLocale -> String -> t -> String
- parseTimeM :: (MonadFail m, ParseTime t) => Bool -> TimeLocale -> String -> String -> m t
- parseTimeMultipleM :: (MonadFail m, ParseTime t) => Bool -> TimeLocale -> [(String, String)] -> m t
- parseTimeOrError :: ParseTime t => Bool -> TimeLocale -> String -> String -> t
- readSTime :: ParseTime t => Bool -> TimeLocale -> String -> ReadS t
- readPTime :: ParseTime t => Bool -> TimeLocale -> String -> ReadP t
- class ParseTime t
- data TimeLocale = TimeLocale {}
- defaultTimeLocale :: TimeLocale
- iso8601DateFormat :: Maybe String -> String
- rfc822DateFormat :: String
UNIX-style formatting
class FormatTime t Source #
Minimal complete definition
Instances
formatTime :: FormatTime t => TimeLocale -> String -> t -> String Source #
Substitute various time-related information for each %-code in the string, as per formatCharacter.
The general form is %<modifier><width><alternate><specifier>, where <modifier>, <width>, and <alternate> are optional.
<modifier>
glibc-style modifiers can be used before the specifier (here marked as z):
%-z- no padding
%_z- pad with spaces
%0z- pad with zeros
%^z- convert to upper case
%#z- convert to lower case (consistently, unlike glibc)
<width>
Width digits can also be used after any modifiers and before the specifier (here marked as z), for example:
%4z- pad to 4 characters (with default padding character)
%_12z- pad with spaces to 12 characters
<alternate>
An optional E character indicates an alternate formatting. Currently this only affects %Z and %z.
%Ez- alternate formatting
<specifier>
For all types (note these three are done by formatTime, not by formatCharacter):
%%%%t- tab
%n- newline
TimeZone
For TimeZone (and ZonedTime and UTCTime):
%z- timezone offset in the format
±HHMM %Ez- timezone offset in the format
±HH:MM %Z- timezone name (or else offset in the format
±HHMM) %EZ- timezone name (or else offset in the format
±HH:MM)
LocalTime
For LocalTime (and ZonedTime and UTCTime and UniversalTime):
%c- as
dateTimeFmtlocale(e.g.%a %b %e %H:%M:%S %Z %Y)
TimeOfDay
For TimeOfDay (and LocalTime and ZonedTime and UTCTime and UniversalTime):
%R- same as
%H:%M %T- same as
%H:%M:%S %X- as
timeFmtlocale(e.g.%H:%M:%S) %r- as
time12Fmtlocale(e.g.%I:%M:%S %p) %P- day-half of day from (
amPmlocale), converted to lowercase,am,pm %p- day-half of day from (
amPmlocale),AM,PM %H- hour of day (24-hour), 0-padded to two chars,
00-23 %k- hour of day (24-hour), space-padded to two chars,
0-23 %I- hour of day-half (12-hour), 0-padded to two chars,
01-12 %l- hour of day-half (12-hour), space-padded to two chars,
1-12 %M- minute of hour, 0-padded to two chars,
00-59 %S- second of minute (without decimal part), 0-padded to two chars,
00-60 %q- picosecond of second, 0-padded to twelve chars,
000000000000-999999999999. %Q- decimal point and fraction of second, up to 12 second decimals, without trailing zeros.
For a whole number of seconds,
%Qomits the decimal point unless padding is specified.
UTCTime and ZonedTime
For UTCTime and ZonedTime:
%s- number of whole seconds since the Unix epoch. For times before
the Unix epoch, this is a negative number. Note that in
%s.%qand%s%Qthe decimals are positive, not negative. For example, 0.9 seconds before the Unix epoch is formatted as-1.1with%s%Q.
DayOfWeek
For DayOfWeek (and Day and LocalTime and ZonedTime and UTCTime and UniversalTime):
%u- day of week number for Week Date format,
1(= Monday) -7(= Sunday) %w- day of week number,
0(= Sunday) -6(= Saturday) %a- day of week, short form (
sndfromwDayslocale),Sun-Sat %A- day of week, long form (
fstfromwDayslocale),Sunday-Saturday
Month
For Month (and Day and LocalTime and ZonedTime and UTCTime and UniversalTime):
%Y- year, no padding. Note
%0Yand%_Ypad to four chars %y- year of century, 0-padded to two chars,
00-99 %C- century, no padding. Note
%0Cand%_Cpad to two chars %B- month name, long form (
fstfrommonthslocale),January-December %b,%h- month name, short form (
sndfrommonthslocale),Jan-Dec %m- month of year, 0-padded to two chars,
01-12
Day
For Day (and LocalTime and ZonedTime and UTCTime and UniversalTime):
%D- same as
%m/%d/%y %F- same as
%Y-%m-%d %x- as
dateFmtlocale(e.g.%m/%d/%y) %d- day of month, 0-padded to two chars,
01-31 %e- day of month, space-padded to two chars,
1-31 %j- day of year, 0-padded to three chars,
001-366 %f- century for Week Date format, no padding. Note
%0fand%_fpad to two chars %V- week of year for Week Date format, 0-padded to two chars,
01-53 %U- week of year where weeks start on Sunday (as
sundayStartWeek), 0-padded to two chars,00-53 %W- week of year where weeks start on Monday (as
mondayStartWeek), 0-padded to two chars,00-53
Duration types
The specifiers for DiffTime, NominalDiffTime, CalendarDiffDays, and CalendarDiffTime are semantically
separate from the other types.
Specifiers on negative time differences will generally be negative (think rem rather than mod).
NominalDiffTime and DiffTime
Note that a "minute" of DiffTime is simply 60 SI seconds, rather than a minute of civil time.
Use NominalDiffTime to work with civil time, ignoring any leap seconds.
For NominalDiffTime and DiffTime:
%w- total whole weeks
%d- total whole days
%D- whole days of week
%h- total whole hours
%H- whole hours of day
%m- total whole minutes
%M- whole minutes of hour
%s- total whole seconds
%Es- total seconds, with decimal point and up to <width> (default 12) decimal places, without trailing zeros.
For a whole number of seconds,
%Esomits the decimal point unless padding is specified. %0Es- total seconds, with decimal point and <width> (default 12) decimal places.
%S- whole seconds of minute
%ES- seconds of minute, with decimal point and up to <width> (default 12) decimal places, without trailing zeros.
For a whole number of seconds,
%ESomits the decimal point unless padding is specified. %0ES- seconds of minute as two digits, with decimal point and <width> (default 12) decimal places.
CalendarDiffDays
For CalendarDiffDays (and CalendarDiffTime):
%y- total years
%b- total months
%B- months of year
%w- total weeks, not including months
%d- total days, not including months
%D- days of week
CalendarDiffTime
For CalendarDiffTime:
%h- total hours, not including months
%H- hours of day
%m- total minutes, not including months
%M- minutes of hour
%s- total whole seconds, not including months
%Es- total seconds, not including months, with decimal point and up to <width> (default 12) decimal places, without trailing zeros.
For a whole number of seconds,
%Esomits the decimal point unless padding is specified. %0Es- total seconds, not including months, with decimal point and <width> (default 12) decimal places.
%S- whole seconds of minute
%ES- seconds of minute, with decimal point and up to <width> (default 12) decimal places, without trailing zeros.
For a whole number of seconds,
%ESomits the decimal point unless padding is specified. %0ES- seconds of minute as two digits, with decimal point and <width> (default 12) decimal places.
UNIX-style parsing
Arguments
| :: (MonadFail m, ParseTime t) | |
| => Bool | Accept leading and trailing whitespace? |
| -> TimeLocale | Time locale. |
| -> String | Format string. |
| -> String | Input string. |
| -> m t | Return the time value, or fail if the input could not be parsed using the given format. |
Parses a time value given a format string.
Missing information will be derived from 1970-01-01 00:00 UTC (which was a Thursday).
Supports the same %-codes as formatTime, including %-, %_ and %0 modifiers, however padding widths are not supported.
Case is not significant in the input string.
Some variations in the input are accepted:
%z%Ez- accepts any of
±HHMMor±HH:MM. %Z%EZ- accepts any string of letters, or any of the formats accepted by
%z. %0Y- accepts exactly four digits.
%0G- accepts exactly four digits.
%0C- accepts exactly two digits.
%0f- accepts exactly two digits.
For example, to parse a date in YYYY-MM-DD format, while allowing the month
and date to have optional leading zeros (notice the - modifier used for %m
and %d):
Prelude Data.Time> parseTimeM True defaultTimeLocale "%Y-%-m-%-d" "2010-3-04" :: Maybe Day Just 2010-03-04
Arguments
| :: (MonadFail m, ParseTime t) | |
| => Bool | Accept leading and trailing whitespace? |
| -> TimeLocale | Time locale. |
| -> [(String, String)] | Pairs of (format string, input string). |
| -> m t | Return the time value, or fail if the input could not be parsed using the given format. |
Parses a time value given a list of pairs of format and input. Resulting value is constructed from all provided specifiers.
Arguments
| :: ParseTime t | |
| => Bool | Accept leading and trailing whitespace? |
| -> TimeLocale | Time locale. |
| -> String | Format string. |
| -> String | Input string. |
| -> t | The time value. |
Parse a time value given a format string. Fails if the input could
not be parsed using the given format. See parseTimeM for details.
Arguments
| :: ParseTime t | |
| => Bool | Accept leading whitespace? |
| -> TimeLocale | Time locale. |
| -> String | Format string |
| -> ReadS t |
Parse a time value given a format string. See parseTimeM for details.
Arguments
| :: ParseTime t | |
| => Bool | Accept leading whitespace? |
| -> TimeLocale | Time locale. |
| -> String | Format string |
| -> ReadP t |
Parse a time value given a format string. See parseTimeM for details.
The class of types which can be parsed given a UNIX-style time format string.
Minimal complete definition
Instances
Locale
data TimeLocale Source #
Constructors
| TimeLocale | |
Instances
| Eq TimeLocale Source # | |
Defined in Data.Time.Format.Locale | |
| Ord TimeLocale Source # | |
Defined in Data.Time.Format.Locale Methods compare :: TimeLocale -> TimeLocale -> Ordering # (<) :: TimeLocale -> TimeLocale -> Bool # (<=) :: TimeLocale -> TimeLocale -> Bool # (>) :: TimeLocale -> TimeLocale -> Bool # (>=) :: TimeLocale -> TimeLocale -> Bool # max :: TimeLocale -> TimeLocale -> TimeLocale # min :: TimeLocale -> TimeLocale -> TimeLocale # | |
| Show TimeLocale Source # | |
Defined in Data.Time.Format.Locale Methods showsPrec :: Int -> TimeLocale -> ShowS # show :: TimeLocale -> String # showList :: [TimeLocale] -> ShowS # | |
defaultTimeLocale :: TimeLocale Source #
Locale representing American usage.
knownTimeZones contains only the ten time-zones mentioned in RFC 802 sec. 5:
"UT", "GMT", "EST", "EDT", "CST", "CDT", "MST", "MDT", "PST", "PDT".
Note that the parsing functions will regardless parse "UTC", single-letter military time-zones, and +HHMM format.
iso8601DateFormat :: Maybe String -> String Source #
Deprecated: use Data.Time.Format.ISO8601 functions instead
Construct format string according to ISO-8601.
The Maybe String argument allows to supply an optional time specification. E.g.:
iso8601DateFormatNothing == "%Y-%m-%d" -- i.e.YYYY-MM-DDiso8601DateFormat(Just "%H:%M:%S") == "%Y-%m-%dT%H:%M:%S" -- i.e.YYYY-MM-DDTHH:MM:SS
rfc822DateFormat :: String Source #
Format string according to RFC822.