Copyright | (C) 2013-2016 University of Twente 2021 QBayLogic B.V. |
---|---|
License | BSD2 (see the file LICENSE) |
Maintainer | QBayLogic B.V. <devops@qbaylogic.com> |
Safe Haskell | Trustworthy |
Language | Haskell2010 |
Extensions |
|
Fixed point numbers
- The
Num
operators for the given types saturate on overflow, and use truncation as the rounding method. Fixed
has an instance forFractional
meaning you use fractional literals(3.75 ::
.SFixed
4 18)- Both integer literals and fractional literals are clipped to
minBound
andmaxBound
. NB: Needs the `-XNegativeLiterals` language extension to work for signed numbers. - There is no
Floating
instance forFixed
, but you can use$$(
to createfLit
d)Fixed
point literal fromDouble
constant at compile-time. - Use Constraint synonyms when writing type signatures
for polymorphic functions that use
Fixed
point numbers.
BEWARE: rounding by truncation can introduce errors larger than naively assumed; e.g. for Fixed 16 1, rounding by truncation turns the real number 4.99 to 4.5, not 5.0, i.e. an error or 0.49 instead of 0.01
BEWARE: rounding by truncation introduces a sign bias!
- Truncation for positive numbers effectively results in: round towards zero.
- Truncation for negative numbers effectively results in: round towards -infinity.
Reasoning about precision
Givens the real numbers A and B, and the corresponding fixed point numbers FA+-da and FB+db, where da and db denote the (potential) error introduced by truncation w.r.t. the original A and B, the arithmetic operators on fixed point numbers have the following error propagation properties:
- Addition: da + db
- Subtraction: da - db
- Multiplication: FA*db + FB*da + da*db
- Division: (FA+da)/(FB+db) - FA/FB
Additional error from truncation
Given:
>>>
4.13 :: UFixed 16 3
4.125>>>
20.9 :: UFixed 16 3
20.875
The expected error that we would get from multiplication is: 20.875*0.005 + 4.125*0.025 + 0.025*0.005 = 0.207625
>>>
4.13 * 20.9 :: Double
86.317>>>
(4.13 :: UFixed 16 3) `mul` (20.9 :: UFixed 16 3) :: UFixed 32 6
86.109375>>>
86.109375 + 0.207625 :: Double
86.317
However the 0.109375 is smaller than 2^-3, so the regular multiplication operator that uses truncation introduces an additional error of 0.109375:
>>>
(4.13 :: UFixed 16 3) * (20.9 :: UFixed 16 3) :: UFixed 16 3
86.0
Synopsis
- type SFixed = Fixed Signed
- sf :: SNat frac -> Signed (int + frac) -> SFixed int frac
- unSF :: SFixed int frac -> Signed (int + frac)
- type UFixed = Fixed Unsigned
- uf :: SNat frac -> Unsigned (int + frac) -> UFixed int frac
- unUF :: UFixed int frac -> Unsigned (int + frac)
- divide :: DivideC rep int1 frac1 int2 frac2 => Fixed rep int1 frac1 -> Fixed rep int2 frac2 -> Fixed rep ((int1 + frac2) + 1) (int2 + frac1)
- fLit :: forall rep int frac size. (size ~ (int + frac), KnownNat frac, Bounded (rep size), Integral (rep size)) => Double -> Q (TExp (Fixed rep int frac))
- fLitR :: forall rep int frac size. (size ~ (int + frac), KnownNat frac, Bounded (rep size), Integral (rep size)) => Double -> Fixed rep int frac
- newtype Fixed (rep :: Nat -> Type) (int :: Nat) (frac :: Nat) = Fixed {}
- resizeF :: forall rep int1 frac1 int2 frac2. ResizeFC rep int1 frac1 int2 frac2 => Fixed rep int1 frac1 -> Fixed rep int2 frac2
- fracShift :: KnownNat frac => Fixed rep int frac -> Int
- type NumSFixedC int frac = (KnownNat ((int + int) + (frac + frac)), KnownNat (frac + frac), KnownNat (int + int), KnownNat (int + frac), KnownNat frac, KnownNat int)
- type ENumSFixedC int1 frac1 int2 frac2 = (KnownNat (int2 + frac2), KnownNat ((1 + Max int1 int2) + Max frac1 frac2), KnownNat (Max frac1 frac2), KnownNat (1 + Max int1 int2), KnownNat (int1 + frac1), KnownNat frac2, KnownNat int2, KnownNat frac1, KnownNat int1)
- type FracSFixedC int frac = (NumSFixedC int frac, KnownNat (((int + frac) + 1) + (int + frac)))
- type ResizeSFC int1 frac1 int2 frac2 = (KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2, KnownNat (int2 + frac2), KnownNat (int1 + frac1))
- type DivideSC int1 frac1 int2 frac2 = (KnownNat (((int1 + frac2) + 1) + (int2 + frac1)), KnownNat frac2, KnownNat int2, KnownNat frac1, KnownNat int1)
- type NumUFixedC int frac = NumSFixedC int frac
- type ENumUFixedC int1 frac1 int2 frac2 = ENumSFixedC int1 frac1 int2 frac2
- type FracUFixedC int frac = FracSFixedC int frac
- type ResizeUFC int1 frac1 int2 frac2 = ResizeSFC int1 frac1 int2 frac2
- type DivideUC int1 frac1 int2 frac2 = DivideSC int1 frac1 int2 frac2
- type NumFixedC rep int frac = (SaturatingNum (rep (int + frac)), ExtendingNum (rep (int + frac)) (rep (int + frac)), MResult (rep (int + frac)) (rep (int + frac)) ~ rep ((int + int) + (frac + frac)), BitSize (rep ((int + int) + (frac + frac))) ~ (int + ((int + frac) + frac)), BitPack (rep ((int + int) + (frac + frac))), Bits (rep ((int + int) + (frac + frac))), BitPack (rep (int + frac)), Bits (rep (int + frac)), Integral (rep (int + frac)), Resize rep, Typeable rep, KnownNat int, KnownNat frac)
- type ENumFixedC rep int1 frac1 int2 frac2 = (Bounded (rep ((1 + Max int1 int2) + Max frac1 frac2)), Num (rep ((1 + Max int1 int2) + Max frac1 frac2)), Bits (rep ((1 + Max int1 int2) + Max frac1 frac2)), ExtendingNum (rep (int1 + frac1)) (rep (int2 + frac2)), MResult (rep (int1 + frac1)) (rep (int2 + frac2)) ~ rep ((int1 + int2) + (frac1 + frac2)), KnownNat int1, KnownNat int2, KnownNat frac1, KnownNat frac2, Resize rep)
- type FracFixedC rep int frac = (NumFixedC rep int frac, DivideC rep int frac int frac)
- type ResizeFC rep int1 frac1 int2 frac2 = (Resize rep, Ord (rep (int1 + frac1)), Num (rep (int1 + frac1)), Bits (rep (int1 + frac1)), Bits (rep (int2 + frac2)), Bounded (rep (int2 + frac2)), KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2)
- type DivideC rep int1 frac1 int2 frac2 = (Resize rep, Integral (rep (((int1 + frac2) + 1) + (int2 + frac1))), Bits (rep (((int1 + frac2) + 1) + (int2 + frac1))), KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2)
- asRepProxy :: Fixed rep int frac -> Proxy rep
- asIntProxy :: Fixed rep int frac -> Proxy int
SFixed
: Signed
Fixed
point numbers
type SFixed = Fixed Signed Source #
Signed Fixed
-point number, with int
integer bits (including sign-bit)
and frac
fractional bits.
- The range
SFixed
int
frac
numbers is: [-(2^(int
-1)) .. 2^(int
-1) - 2^-frac
] - The resolution of
SFixed
int
frac
numbers is: 2^frac
- The
Num
operators for this type saturate on overflow, and use truncation as the rounding method.
>>>
maxBound :: SFixed 3 4
3.9375>>>
minBound :: SFixed 3 4
-4.0>>>
read (show (maxBound :: SFixed 3 4)) :: SFixed 3 4
3.9375>>>
1 + 2 :: SFixed 3 4
3.0>>>
2 + 3 :: SFixed 3 4
3.9375>>>
(-2) + (-3) :: SFixed 3 4
-4.0>>>
1.375 * (-0.8125) :: SFixed 3 4
-1.125>>>
(1.375 :: SFixed 3 4) `mul` (-0.8125 :: SFixed 3 4) :: SFixed 6 8
-1.1171875>>>
(2 :: SFixed 3 4) `add` (3 :: SFixed 3 4) :: SFixed 4 4
5.0>>>
(-2 :: SFixed 3 4) `add` (-3 :: SFixed 3 4) :: SFixed 4 4
-5.0
unSF :: SFixed int frac -> Signed (int + frac) Source #
See the underlying representation of a Signed Fixed-point integer
UFixed
: Unsigned
Fixed
point numbers
type UFixed = Fixed Unsigned Source #
Unsigned Fixed
-point number, with int
integer bits and frac
fractional bits
- The range
UFixed
int
frac
numbers is: [0 .. 2^int
- 2^-frac
] - The resolution of
UFixed
int
frac
numbers is: 2^frac
- The
Num
operators for this type saturate on overflow, and use truncation as the rounding method.
>>>
maxBound :: UFixed 3 4
7.9375>>>
minBound :: UFixed 3 4
0.0>>>
1 + 2 :: UFixed 3 4
3.0>>>
2 + 6 :: UFixed 3 4
7.9375>>>
1 - 3 :: UFixed 3 4
0.0>>>
1.375 * 0.8125 :: UFixed 3 4
1.0625>>>
(1.375 :: UFixed 3 4) `mul` (0.8125 :: UFixed 3 4) :: UFixed 6 8
1.1171875>>>
(2 :: UFixed 3 4) `add` (6 :: UFixed 3 4) :: UFixed 4 4
8.0
However, sub
does not saturate to minBound
on underflow:
>>>
(1 :: UFixed 3 4) `sub` (3 :: UFixed 3 4) :: UFixed 4 4
14.0
unUF :: UFixed int frac -> Unsigned (int + frac) Source #
See the underlying representation of an Unsigned Fixed-point integer
Division
divide :: DivideC rep int1 frac1 int2 frac2 => Fixed rep int1 frac1 -> Fixed rep int2 frac2 -> Fixed rep ((int1 + frac2) + 1) (int2 + frac1) Source #
Fixed point division
When used in a polymorphic setting, use the following Constraint synonyms for less verbose type signatures:
for:DivideC
rep int1 frac1 int2 frac2Fixed
rep int1 frac1 ->Fixed
rep int2 frac2 ->Fixed
rep (int1 + frac2 + 1) (int2 + frac1)
for:DivideSC
rep int1 frac1 int2 frac2SFixed
int1 frac1 ->SFixed
int2 frac2 ->SFixed
(int1 + frac2 + 1) (int2 + frac1)
for:DivideUC
rep int1 frac1 int2 frac2UFixed
int1 frac1 ->UFixed
int2 frac2 ->UFixed
(int1 + frac2 + 1) (int2 + frac1)
Compile-time Double
conversion
fLit :: forall rep int frac size. (size ~ (int + frac), KnownNat frac, Bounded (rep size), Integral (rep size)) => Double -> Q (TExp (Fixed rep int frac)) Source #
Convert, at compile-time, a Double
constant to a Fixed
-point literal.
The conversion saturates on overflow, and uses truncation as its rounding
method.
So when you type:
n = $$(fLit
pi) ::SFixed
4 4
The compiler sees:
n =Fixed
(fromInteger 50) ::SFixed
4 4
Upon evaluation you see that the value is rounded / truncated in accordance to the fixed point representation:
>>>
n
3.125
Further examples:
>>>
sin 0.5 :: Double
0.479425538604203>>>
$$(fLit (sin 0.5)) :: SFixed 1 8
0.4765625>>>
atan 0.2 :: Double
0.19739555984988078>>>
$$(fLit (atan 0.2)) :: SFixed 1 8
0.1953125>>>
$$(fLit (atan 0.2)) :: SFixed 1 20
0.19739532470703125
Run-time Double
conversion (not synthesizable)
fLitR :: forall rep int frac size. (size ~ (int + frac), KnownNat frac, Bounded (rep size), Integral (rep size)) => Double -> Fixed rep int frac Source #
Convert, at run-time, a Double
to a Fixed
-point.
NB: This function is not synthesizable
Creating data-files
An example usage of this function is to convert a data file containing
Double
s to a data file with ASCII-encoded binary numbers to be used by a
synthesizable function like asyncRomFile
. For
example, consider a file Data.txt
containing:
1.2 2.0 3.0 4.0 -1.0 -2.0 -3.5 -4.0
which we want to put in a ROM, interpreting them as 8.8
signed fixed point
numbers. What we do is that we first create a conversion utility,
createRomFile
, which uses fLitR
:
createRomFile.hs
:
module Main where import Clash.Prelude import Clash.Prelude.ROM.File import System.Environment import qualified Data.List as L createRomFile :: BitPack a => (Double -> a) -> FilePath -> FilePath -> IO () createRomFile convert fileR fileW = do f <- readFile fileR let ds :: [Double] ds = L.concat . (L.map . L.map) read . L.map words $ lines f fes = L.map convert ds writeFile fileW (memFile
Nothing fes) toSFixed8_8 :: Double -> SFixed 8 8 toSFixed8_8 =fLitR
main :: IO () main = do [fileR,fileW] <- getArgs createRomFile toSFixed8_8 fileR fileW
We then compile this to an executable:
$ clash --make createRomFile.hs
We can then use this utility to convert our Data.txt
file which contains
Double
s to a Data.bin
file which will containing the desired ASCII-encoded
binary data:
$ ./createRomFile "Data.txt" "Data.bin"
Which results in a Data.bin
file containing:
0000000100110011 0000001000000000 0000001100000000 0000010000000000 1111111100000000 1111111000000000 1111110010000000 1111110000000000
We can then use this Data.bin
file in for our ROM:
romF :: Unsigned 3 -> Unsigned 3 -> SFixed 8 8 romF rowAddr colAddr =unpack
$asyncRomFile
d8 "Data.bin" ((rowAddr * 4) + colAddr)
And see that it works as expected:
>>> romF 1 2 -3.5 >>> romF 0 0 1.19921875
Using Template Haskell
For those of us who like to live on the edge, another option is to convert
our Data.txt
at compile-time using
Template Haskell.
For this we first create a module CreateRomFileTH.hs
:
module CreateRomFileTH (romDataFromFile) where
import Clash.Prelude
import Clash.Prelude.ROM.File
import qualified Data.List as L
import Language.Haskell.TH (ExpQ, litE, stringL)
import Language.Haskell.TH.Syntax (qRunIO)
createRomFile :: BitPack a => (Double -> a)
-> FilePath -> FilePath -> IO ()
createRomFile convert fileR fileW = do
f <- readFile fileR
let ds :: [Double]
ds = L.concat . (L.map . L.map) read . L.map words $ lines f
fes = L.map convert ds
writeFile fileW (memFile
Nothing fes)
romDataFromFile :: BitPack a => (Double -> a) -> String -> ExpQ
romDataFromFile convert fileR = do
let fileW = fileR L.++ ".bin"
qRunIO (createRomFile convert fileR fileW)
litE (stringL fileW)
Instead of first converting Data.txt
to Data.bin
, we will now use the
romDataFromFile
function to convert Data.txt
to a new file in the proper
format at compile-time of our new romF'
function:
import Clash.Prelude import CreateRomFileTH romF' :: Unsigned 3 -> Unsigned 3 -> SFixed 8 8 romF' rowAddr colAddr = unpack $ asyncRomFile d8 $(romDataFromFile (fLitR :: Double -> SFixed 8 8) "Data.txt") -- Template Haskell splice ((rowAddr * 4) + colAddr)
And see that it works just like the romF
function from earlier:
>>> romF' 1 2 -3.5 >>> romF' 0 0 1.19921875
Fixed
point wrapper
newtype Fixed (rep :: Nat -> Type) (int :: Nat) (frac :: Nat) Source #
Fixed
-point number
Where:
rep
is the underlying representationint
is the number of bits used to represent the integer partfrac
is the number of bits used to represent the fractional part
The Num
operators for this type saturate to maxBound
on overflow and
minBound
on underflow, and use truncation as the rounding method.
Fixed has the type role
>>>
:i Fixed
type role Fixed representational nominal nominal ...
as it is safe to coerce between different compatible underlying types, but
not necessasrily safe to coerce between different widths of this type. To
change the width, use the functions in the Resize
class.
Instances
(Lift (rep (int + frac)), KnownNat frac, KnownNat int, Typeable rep) => Lift (Fixed rep int frac :: Type) Source # | |
Bounded (rep (int + frac)) => Bounded (Fixed rep int frac) Source # | |
NumFixedC rep int frac => Enum (Fixed rep int frac) Source # | These behave similar to The rules set out there for instances of both |
Defined in Clash.Sized.Fixed succ :: Fixed rep int frac -> Fixed rep int frac # pred :: Fixed rep int frac -> Fixed rep int frac # toEnum :: Int -> Fixed rep int frac # fromEnum :: Fixed rep int frac -> Int # enumFrom :: Fixed rep int frac -> [Fixed rep int frac] # enumFromThen :: Fixed rep int frac -> Fixed rep int frac -> [Fixed rep int frac] # enumFromTo :: Fixed rep int frac -> Fixed rep int frac -> [Fixed rep int frac] # enumFromThenTo :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac -> [Fixed rep int frac] # | |
Eq (rep (int + frac)) => Eq (Fixed rep int frac) Source # | |
FracFixedC rep int frac => Fractional (Fixed rep int frac) Source # | The operators of this instance saturate on overflow, and use truncation as the rounding method. When used in a polymorphic setting, use the following Constraint synonyms for less verbose type signatures:
|
(Typeable rep, Typeable int, Typeable frac, Data (rep (int + frac))) => Data (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> Fixed rep int frac -> c (Fixed rep int frac) # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c (Fixed rep int frac) # toConstr :: Fixed rep int frac -> Constr # dataTypeOf :: Fixed rep int frac -> DataType # dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c (Fixed rep int frac)) # dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c (Fixed rep int frac)) # gmapT :: (forall b. Data b => b -> b) -> Fixed rep int frac -> Fixed rep int frac # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> Fixed rep int frac -> r # gmapQr :: forall r r'. (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> Fixed rep int frac -> r # gmapQ :: (forall d. Data d => d -> u) -> Fixed rep int frac -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> Fixed rep int frac -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> Fixed rep int frac -> m (Fixed rep int frac) # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> Fixed rep int frac -> m (Fixed rep int frac) # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> Fixed rep int frac -> m (Fixed rep int frac) # | |
NumFixedC rep int frac => Num (Fixed rep int frac) Source # | The operators of this instance saturate on overflow, and use truncation as the rounding method. When used in a polymorphic setting, use the following Constraint synonyms for less verbose type signatures:
|
Defined in Clash.Sized.Fixed (+) :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # (-) :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # (*) :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # negate :: Fixed rep int frac -> Fixed rep int frac # abs :: Fixed rep int frac -> Fixed rep int frac # signum :: Fixed rep int frac -> Fixed rep int frac # fromInteger :: Integer -> Fixed rep int frac # | |
Ord (rep (int + frac)) => Ord (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed compare :: Fixed rep int frac -> Fixed rep int frac -> Ordering # (<) :: Fixed rep int frac -> Fixed rep int frac -> Bool # (<=) :: Fixed rep int frac -> Fixed rep int frac -> Bool # (>) :: Fixed rep int frac -> Fixed rep int frac -> Bool # (>=) :: Fixed rep int frac -> Fixed rep int frac -> Bool # max :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # min :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # | |
(size ~ (int + frac), KnownNat frac, Bounded (rep size), Integral (rep size)) => Read (Fixed rep int frac) Source # | None of the |
NumFixedC rep int frac => Real (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed toRational :: Fixed rep int frac -> Rational # | |
FracFixedC rep int frac => RealFrac (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed | |
(size ~ (int + frac), KnownNat frac, Integral (rep size)) => Show (Fixed rep int frac) Source # | |
Arbitrary (rep (int + frac)) => Arbitrary (Fixed rep int frac) Source # | |
CoArbitrary (rep (int + frac)) => CoArbitrary (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed coarbitrary :: Fixed rep int frac -> Gen b -> Gen b # | |
Bits (rep (int + frac)) => Bits (Fixed rep int frac) Source # | Instance functions do not saturate.
Meaning that " |
Defined in Clash.Sized.Fixed (.&.) :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # (.|.) :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # xor :: Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac # complement :: Fixed rep int frac -> Fixed rep int frac # shift :: Fixed rep int frac -> Int -> Fixed rep int frac # rotate :: Fixed rep int frac -> Int -> Fixed rep int frac # zeroBits :: Fixed rep int frac # bit :: Int -> Fixed rep int frac # setBit :: Fixed rep int frac -> Int -> Fixed rep int frac # clearBit :: Fixed rep int frac -> Int -> Fixed rep int frac # complementBit :: Fixed rep int frac -> Int -> Fixed rep int frac # testBit :: Fixed rep int frac -> Int -> Bool # bitSizeMaybe :: Fixed rep int frac -> Maybe Int # bitSize :: Fixed rep int frac -> Int # isSigned :: Fixed rep int frac -> Bool # shiftL :: Fixed rep int frac -> Int -> Fixed rep int frac # unsafeShiftL :: Fixed rep int frac -> Int -> Fixed rep int frac # shiftR :: Fixed rep int frac -> Int -> Fixed rep int frac # unsafeShiftR :: Fixed rep int frac -> Int -> Fixed rep int frac # rotateL :: Fixed rep int frac -> Int -> Fixed rep int frac # rotateR :: Fixed rep int frac -> Int -> Fixed rep int frac # | |
FiniteBits (rep (int + frac)) => FiniteBits (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed finiteBitSize :: Fixed rep int frac -> Int # countLeadingZeros :: Fixed rep int frac -> Int # countTrailingZeros :: Fixed rep int frac -> Int # | |
Default (rep (int + frac)) => Default (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed | |
NFData (rep (int + frac)) => NFData (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed | |
NumFixedC rep int frac => SaturatingNum (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed satAdd :: SaturationMode -> Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac Source # satSub :: SaturationMode -> Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac Source # satMul :: SaturationMode -> Fixed rep int frac -> Fixed rep int frac -> Fixed rep int frac Source # satSucc :: SaturationMode -> Fixed rep int frac -> Fixed rep int frac Source # satPred :: SaturationMode -> Fixed rep int frac -> Fixed rep int frac Source # | |
NFDataX (rep (int + frac)) => NFDataX (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed | |
(size ~ (int + frac), KnownNat frac, Integral (rep size)) => ShowX (Fixed rep int frac) Source # | |
(BitPack (rep (int + frac)), KnownNat (BitSize (rep (int + frac)))) => BitPack (Fixed rep int frac) Source # | |
Bundle (Fixed rep int frac) Source # | |
Defined in Clash.Signal.Bundle | |
Bundle (Fixed rep int frac) Source # | |
Defined in Clash.Signal.Delayed.Bundle | |
NFDataX (rep (int + frac)) => AutoReg (Fixed rep int frac) Source # | |
Defined in Clash.Class.AutoReg.Internal | |
ENumFixedC rep int1 frac1 int2 frac2 => ExtendingNum (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # | When used in a polymorphic setting, use the following Constraint synonyms for less verbose type signatures:
|
Defined in Clash.Sized.Fixed type AResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # type MResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # add :: Fixed rep int1 frac1 -> Fixed rep int2 frac2 -> AResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # sub :: Fixed rep int1 frac1 -> Fixed rep int2 frac2 -> AResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # mul :: Fixed rep int1 frac1 -> Fixed rep int2 frac2 -> MResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # | |
type Unbundled dom d (Fixed rep int frac) Source # | |
Defined in Clash.Signal.Delayed.Bundle | |
type Unbundled dom (Fixed rep int frac) Source # | |
Defined in Clash.Signal.Bundle | |
type TryDomain t (Fixed a n m) Source # | |
Defined in Clash.Class.HasDomain.HasSingleDomain | |
type BitSize (Fixed rep int frac) Source # | |
Defined in Clash.Sized.Fixed | |
type AResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # | |
type MResult (Fixed rep int1 frac1) (Fixed rep int2 frac2) Source # | |
resizeF :: forall rep int1 frac1 int2 frac2. ResizeFC rep int1 frac1 int2 frac2 => Fixed rep int1 frac1 -> Fixed rep int2 frac2 Source #
Saturating resize operation, truncates for rounding
>>>
0.8125 :: SFixed 3 4
0.8125>>>
resizeF (0.8125 :: SFixed 3 4) :: SFixed 2 3
0.75>>>
3.4 :: SFixed 3 4
3.375>>>
resizeF (3.4 :: SFixed 3 4) :: SFixed 2 3
1.875>>>
maxBound :: SFixed 2 3
1.875
When used in a polymorphic setting, use the following Constraint synonyms for less verbose type signatures:
fracShift :: KnownNat frac => Fixed rep int frac -> Int Source #
Get the position of the virtual point
of a Fixed
-point
number
Constraint synonyms
Writing polymorphic functions over fixed point numbers can be a potentially verbose due to the many class constraints induced by the functions and operators of this module.
Writing a simple multiply-and-accumulate function can already give rise to many lines of constraints:
mac :: (KnownNat
frac ,KnownNat
(frac + frac) ,KnownNat
(int + frac) ,KnownNat
(1 + (int + frac)) ,KnownNat
((int + frac) + (int + frac)) , ((int + int) + (frac + frac)) ~ ((int + frac) + (int + frac)) ) =>SFixed
int frac ->SFixed
int frac ->SFixed
int frac ->SFixed
int frac mac s x y = s + (x * y)
But with constraint synonyms, you can write the type signature like this:
mac1 ::NumSFixedC
int frac =>SFixed
int frac ->SFixed
int frac ->SFixed
int frac ->SFixed
int frac mac1 s x y = s + (x * y)
Where NumSFixedC
refers to the Constraints
needed by the operators of
the Num
class for the SFixed
datatype.
Although the number of constraints for the mac
function defined earlier might
be considered small, here is a "this way lies madness" example where you
really want to use constraint kinds:
mac2 :: (KnownNat
frac1 ,KnownNat
frac2 ,KnownNat
frac3 ,KnownNat
(Max frac1 frac2) ,KnownNat
(int1 + frac1) ,KnownNat
(int2 + frac2) ,KnownNat
(int3 + frac3) ,KnownNat
(frac1 + frac2) ,KnownNat
(Max (frac1 + frac2) frac3) ,KnownNat
(((int1 + int2) + (frac1 + frac2)) + (int3 + frac3)) ,KnownNat
((int1 + int2) + (frac1 + frac2)) ,KnownNat
(1 + Max (int1 + frac1) (int2 + frac2)) ,KnownNat
(1 + Max (int1 + int2) int3 + Max (frac1 + frac2) frac3) ,KnownNat
((1 + Max int1 int2) + Max frac1 frac2) ,KnownNat
((1 + Max ((int1 + int2) + (frac1 + frac2)) (int3 + frac3))) , ((int1 + frac1) + (int2 + frac2)) ~ ((int1 + int2) + (frac1 + frac2)) , (((int1 + int2) + int3) + ((frac1 + frac2) + frac3)) ~ (((int1 + int2) + (frac1 + frac2)) + (int3 + frac3)) ) =>SFixed
int1 frac1 ->SFixed
int2 frac2 ->SFixed
int3 frac3 ->SFixed
(1 + Max (int1 + int2) int3) (Max (frac1 + frac2) frac3) mac2 x y s = (x `mul` y) `add` s
Which, with the proper constraint kinds can be reduced to:
mac3 :: (ENumSFixedC
int1 frac1 int2 frac2 ,ENumSFixedC
(int1 + int2) (frac1 + frac2) int3 frac3 ) =>SFixed
int1 frac1 ->SFixed
int2 frac2 ->SFixed
int3 frac3 ->SFixed
(1 + Max (int1 + int2) int3) (Max (frac1 + frac2) frac3) mac3 x y s = (x `mul` y) `add` s
Constraint synonyms for SFixed
type NumSFixedC int frac = (KnownNat ((int + int) + (frac + frac)), KnownNat (frac + frac), KnownNat (int + int), KnownNat (int + frac), KnownNat frac, KnownNat int) Source #
type ENumSFixedC int1 frac1 int2 frac2 = (KnownNat (int2 + frac2), KnownNat ((1 + Max int1 int2) + Max frac1 frac2), KnownNat (Max frac1 frac2), KnownNat (1 + Max int1 int2), KnownNat (int1 + frac1), KnownNat frac2, KnownNat int2, KnownNat frac1, KnownNat int1) Source #
Constraint for the ExtendingNum
instance of SFixed
type FracSFixedC int frac = (NumSFixedC int frac, KnownNat (((int + frac) + 1) + (int + frac))) Source #
Constraint for the Fractional
instance of SFixed
type ResizeSFC int1 frac1 int2 frac2 = (KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2, KnownNat (int2 + frac2), KnownNat (int1 + frac1)) Source #
type DivideSC int1 frac1 int2 frac2 = (KnownNat (((int1 + frac2) + 1) + (int2 + frac1)), KnownNat frac2, KnownNat int2, KnownNat frac1, KnownNat int1) Source #
Constraint synonyms for UFixed
type NumUFixedC int frac = NumSFixedC int frac Source #
type ENumUFixedC int1 frac1 int2 frac2 = ENumSFixedC int1 frac1 int2 frac2 Source #
Constraint for the ExtendingNum
instance of UFixed
type FracUFixedC int frac = FracSFixedC int frac Source #
Constraint for the Fractional
instance of UFixed
Constraint synonyms for Fixed
wrapper
type NumFixedC rep int frac = (SaturatingNum (rep (int + frac)), ExtendingNum (rep (int + frac)) (rep (int + frac)), MResult (rep (int + frac)) (rep (int + frac)) ~ rep ((int + int) + (frac + frac)), BitSize (rep ((int + int) + (frac + frac))) ~ (int + ((int + frac) + frac)), BitPack (rep ((int + int) + (frac + frac))), Bits (rep ((int + int) + (frac + frac))), BitPack (rep (int + frac)), Bits (rep (int + frac)), Integral (rep (int + frac)), Resize rep, Typeable rep, KnownNat int, KnownNat frac) Source #
type ENumFixedC rep int1 frac1 int2 frac2 = (Bounded (rep ((1 + Max int1 int2) + Max frac1 frac2)), Num (rep ((1 + Max int1 int2) + Max frac1 frac2)), Bits (rep ((1 + Max int1 int2) + Max frac1 frac2)), ExtendingNum (rep (int1 + frac1)) (rep (int2 + frac2)), MResult (rep (int1 + frac1)) (rep (int2 + frac2)) ~ rep ((int1 + int2) + (frac1 + frac2)), KnownNat int1, KnownNat int2, KnownNat frac1, KnownNat frac2, Resize rep) Source #
Constraint for the ExtendingNum
instance of Fixed
type FracFixedC rep int frac = (NumFixedC rep int frac, DivideC rep int frac int frac) Source #
Constraint for the Fractional
instance of Fixed
type ResizeFC rep int1 frac1 int2 frac2 = (Resize rep, Ord (rep (int1 + frac1)), Num (rep (int1 + frac1)), Bits (rep (int1 + frac1)), Bits (rep (int2 + frac2)), Bounded (rep (int2 + frac2)), KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2) Source #
Constraint for the resizeF
function
type DivideC rep int1 frac1 int2 frac2 = (Resize rep, Integral (rep (((int1 + frac2) + 1) + (int2 + frac1))), Bits (rep (((int1 + frac2) + 1) + (int2 + frac1))), KnownNat int1, KnownNat frac1, KnownNat int2, KnownNat frac2) Source #
Constraint for the divide
function
Proxy
asRepProxy :: Fixed rep int frac -> Proxy rep Source #