Safe Haskell | Safe-Inferred |
---|---|
Language | Haskell2010 |
This module provides the input layer for Vty, including methods
for initializing an Input
structure and reading Event
s from the
terminal.
Note that due to the evolution of terminal emulators, some keys and combinations will not reliably map to the expected events by any terminal program. There is no 1:1 mapping from key events to bytes read from the terminal input device. In very limited cases the terminal and vty's input process can be customized to resolve these issues; see Graphics.Vty.Config for how to configure vty's input processing.
VTY's Implementation
There are two input modes:
- 7-bit
- 8-bit
The 7-bit input mode is the default and the expected mode in most use cases. This is what Vty uses.
7-bit input encoding
Control key combinations are represented by masking the two high bits of the 7-bit input. Historically the control key actually grounded the two high bit wires: 6 and 7. This is why control key combos map to single character events: the input bytes are identical. The input byte is the bit encoding of the character with bits 6 and 7 masked. Bit 6 is set by shift. Bit 6 and 7 are masked by control. For example,
- Control-I is
i
, `01101001`, and has bit 6 and 7 masked to become `00001001`, which is the ASCII and UTF-8 encoding of the Tab key. - Control+Shift-C is
C
, `01000011`, with bit 6 and 7 set to zero which is `0000011` and is the "End of Text" code. - Hypothesis: This is why capital-A,
A
, has value 65 in ASCII: this is the value 1 with bit 7 set and 6 unset. - Hypothesis: Bit 6 is unset by upper case letters because, initially, there were only upper case letters used and a 5 bit encoding.
8-bit encoding
The 8th bit was originally used for parity checking which is useless for terminal emulators. Some terminal emulators support an 8-bit input encoding. While this provides some advantages, the actual usage is low. Most systems use 7-bit mode but recognize 8-bit control characters when escaped. This is what Vty does.
Escaped Control Keys
Using 7-bit input encoding, the ESC
byte can signal the start of
an encoded control key. To differentiate a single ESC
event from a
control key, the timing of the input is used.
ESC
individually:ESC
byte; no bytes following for a period ofVMIN
milliseconds.- Control keys that contain
ESC
in their encoding: The @ESC byte is followed by more bytes read withinVMIN
milliseconds. All bytes up until the next valid input block are passed to the classifier.
If the current runtime is the threaded runtime then the terminal's
VMIN
and VTIME
behavior reliably implement the above rules. If
the current runtime does not support forkOS
then there is currently
no implementation.
Unicode Input and Escaped Control Key Sequences
The input encoding determines how UTF-8 encoded characters are recognized.
- 7-bit mode: UTF-8 can be input unambiguously. UTF-8 input is a superset of ASCII. UTF-8 does not overlap escaped control key sequences. However, the escape key must be differentiated from escaped control key sequences by the timing of the input bytes.
- 8-bit mode: UTF-8 cannot be input unambiguously. This does not require using the timing of input bytes to differentiate the escape key. Many terminals do not support 8-bit mode.
Terminfo
The terminfo system is used to determine how some keys are encoded.
Terminfo is incomplete and in some cases terminfo is incorrect. Vty
assumes terminfo is correct but provides a mechanism to override
terminfo; see Graphics.Vty.Config, specifically inputOverrides
.
Terminal Input is Broken
Clearly terminal input has fundamental issues. There is no easy way to reliably resolve these issues.
One resolution would be to ditch standard terminal interfaces entirely and just go directly to scancodes. This would be a reasonable option for Vty if everybody used the linux kernel console but for obvious reasons this is not possible.
The Graphics.Vty.Config module supports customizing the input-byte-to-event mapping and xterm supports customizing the scancode-to-input-byte mapping. With a lot of work a user's system can be set up to encode all the key combos in an almost-sane manner.
See also
Synopsis
- data Key
- data Modifier
- data Button
- = BLeft
- | BMiddle
- | BRight
- | BScrollUp
- | BScrollDown
- data Event
- = EvKey Key [Modifier]
- | EvMouseDown Int Int Button [Modifier]
- | EvMouseUp Int Int (Maybe Button)
- | EvResize Int Int
- | EvPaste ByteString
- | EvLostFocus
- | EvGainedFocus
- data Input = Input {
- _eventChannel :: TChan InternalEvent
- shutdownInput :: IO ()
- restoreInputState :: IO ()
- _configRef :: IORef Config
- _inputDebug :: Maybe Handle
- inputForConfig :: Config -> IO Input
Documentation
Representations of non-modifier keys.
- KFun is indexed from 0 to 63. Range of supported FKeys varies by terminal and keyboard.
- KUpLeft, KUpRight, KDownLeft, KDownRight, KCenter support varies by terminal and keyboard.
- Actually, support for most of these but KEsc, KChar, KBS, and KEnter vary by terminal and keyboard.
KEsc | |
KChar Char | |
KBS | |
KEnter | |
KLeft | |
KRight | |
KUp | |
KDown | |
KUpLeft | |
KUpRight | |
KDownLeft | |
KDownRight | |
KCenter | |
KFun Int | |
KBackTab | |
KPrtScr | |
KPause | |
KIns | |
KHome | |
KPageUp | |
KDel | |
KEnd | |
KPageDown | |
KBegin | |
KMenu |
Instances
Modifier keys. Key codes are interpreted such that users are more
likely to have Meta than Alt; for instance on the PC Linux console,
MMeta
will generally correspond to the physical Alt key.
Instances
Generic Modifier Source # | |
Read Modifier Source # | |
Show Modifier Source # | |
NFData Modifier Source # | |
Defined in Graphics.Vty.Input.Events | |
Eq Modifier Source # | |
Ord Modifier Source # | |
Defined in Graphics.Vty.Input.Events | |
type Rep Modifier Source # | |
Defined in Graphics.Vty.Input.Events type Rep Modifier = D1 ('MetaData "Modifier" "Graphics.Vty.Input.Events" "vty-5.37-LphjcTaNMc4I2dNDdVPWAE" 'False) ((C1 ('MetaCons "MShift" 'PrefixI 'False) (U1 :: Type -> Type) :+: C1 ('MetaCons "MCtrl" 'PrefixI 'False) (U1 :: Type -> Type)) :+: (C1 ('MetaCons "MMeta" 'PrefixI 'False) (U1 :: Type -> Type) :+: C1 ('MetaCons "MAlt" 'PrefixI 'False) (U1 :: Type -> Type))) |
Mouse buttons.
Instances
Generic Button Source # | |
Read Button Source # | |
Show Button Source # | |
NFData Button Source # | |
Defined in Graphics.Vty.Input.Events | |
Eq Button Source # | |
Ord Button Source # | |
type Rep Button Source # | |
Defined in Graphics.Vty.Input.Events type Rep Button = D1 ('MetaData "Button" "Graphics.Vty.Input.Events" "vty-5.37-LphjcTaNMc4I2dNDdVPWAE" 'False) ((C1 ('MetaCons "BLeft" 'PrefixI 'False) (U1 :: Type -> Type) :+: C1 ('MetaCons "BMiddle" 'PrefixI 'False) (U1 :: Type -> Type)) :+: (C1 ('MetaCons "BRight" 'PrefixI 'False) (U1 :: Type -> Type) :+: (C1 ('MetaCons "BScrollUp" 'PrefixI 'False) (U1 :: Type -> Type) :+: C1 ('MetaCons "BScrollDown" 'PrefixI 'False) (U1 :: Type -> Type)))) |
Events.
EvKey Key [Modifier] | A keyboard key was pressed with the specified modifiers. |
EvMouseDown Int Int Button [Modifier] | A mouse button was pressed at the specified column and row. Any modifiers available in the event are also provided. |
EvMouseUp Int Int (Maybe Button) | A mouse button was released at the specified column and row. Some terminals report only that a button was released without specifying which one; in that case, Nothing is provided. Otherwise Just the button released is included in the event. |
EvResize Int Int | |
EvPaste ByteString | A paste event occurs when a bracketed paste input sequence is received. For terminals that support bracketed paste mode, these events will be triggered on a paste event. Terminals that do not support bracketed pastes will send the paste contents as ordinary input (which is probably bad, so beware!) Note that the data is provided in raw form and you'll have to decode (e.g. as UTF-8) if that's what your application expects. |
EvLostFocus | The terminal running the application lost input focus. |
EvGainedFocus | The terminal running the application gained input focus. |
Instances
Input | |
|
inputForConfig :: Config -> IO Input Source #
Set up the terminal with file descriptor inputFd
for input.
Returns an Input
.
The table used to determine the Events
to produce for the input
bytes comes from classifyMapForTerm
which is then overridden by
the the applicable entries from the configuration's inputMap
.
The terminal device's mode flags are configured by the
attributeControl
function.